Keyword Search(Steering Wheel, Gasket, etc)
|
Group Number Search(3.686)
|
Part Number Search(450517)
|
|
|
|
1933-1936 - GROUP ACCELERATOR - ACCELERATOR
ACCELERATOR - Accelerator pedal | |||
Part Number | Application | Note | QTY |
(Used on 1002-3-4 only) | - | 1 | |
(Used on 1001 only) | - | 1 | |
- | - | 1 | |
ACCELERATOR - Accelerator pedal bracket | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Accelerator pedal hole cover | |||
Part Number | Application | Note | QTY |
(Not used on 1001) | - | 1 | |
ACCELERATOR - Accelerator pedal insulating sleeve | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Accelerator pedal retracting spring | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Accelerator pedal shaft | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Accelerator pedal shaft assembly | |||
Part Number | Application | Note | QTY |
Used on 1001 only | Not used with clutch control | 1 | |
Not used on 1001 | Not used with clutch control | 1 | |
Used on 1001 only | Used with clutch control | 1 | |
Used on 1002-3-4 | Used with clutch control | 1 | |
- | - | 1 | |
ACCELERATOR - Accelerator pedal shaft bracket-left | |||
Part Number | Application | Note | QTY |
(Not used on 1001) | - | 1 | |
- | - | 1 | |
ACCELERATOR - Accelerator pedal shaft bracket-right | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Accelerator pedal shaft lever short | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Accelerator pedal shaft lever to carburetor throttle valve conn, rod assembly | |||
Part Number | Application | Note | QTY |
- | (Not used with clutch control) | 1 | |
- | (Not used with clutch control) | 1 | |
- | (Use with clutch control) | 1 | |
- | (Use with clutch control) | 1 | |
- | - | 1 | |
- | - | 1 | |
ACCELERATOR - Accelerator pedal shaft lever to carburetor throttle valve conn, rod retracting spring | |||
Part Number | Application | Note | QTY |
- | (Use with clutch control) | 1 | |
ACCELERATOR - Accelerator pedal shaft lever to carburetor throttle valve conn, rod retracting spring clip | |||
Part Number | Application | Note | QTY |
- | (Use with clutch control) | 1 | |
ACCELERATOR - Accelerator pedal shaft lever-lower connecting line | |||
Part Number | Application | Note | QTY |
- | (Use with clutch control) | 1 | |
ACCELERATOR - Accelerator pedal shaft lever-upper | |||
Part Number | Application | Note | QTY |
- | (Use with clutch control) | 1 | |
ACCELERATOR - Accelerator pedal shaft spring | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Ball Joint | |||
Part Number | Application | Note | QTY |
- | (Used with clutch control) | 1 | |
- | (Not used with clutch control) | 1 | |
ACCELERATOR - Clamp screw No. 10-32 x 3/8" rnd. hd. | |||
Part Number | Application | Note | QTY |
- | (Use with clutch control) | 1 | |
ACCELERATOR - Cotter pin | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Cotter pin 1/16 x 1/2" | |||
Part Number | Application | Note | QTY |
- | (Use with clutch control) | 2 | |
ACCELERATOR - Insulating washer | |||
Part Number | Application | Note | QTY |
- | - | 2 | |
ACCELERATOR - Lockwasher 1/4" std | |||
Part Number | Application | Note | QTY |
- | - | 2 | |
ACCELERATOR - Lockwasher 1/4" std. | |||
Part Number | Application | Note | QTY |
(Not used on 1001) | - | 1 | |
ACCELERATOR - Lockwasher 3/16" | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Lockwasher 3/8" std | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Lockwasher 7/16" shakeproof | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Nut 3/8-24 blind | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Nut No. 10-32 | |||
Part Number | Application | Note | QTY |
- | (L.H. thd.) (Used with clutch control) | 1 | |
- | - | 2 | |
- | (Use with clutch control) | 1 | |
ACCELERATOR - Screw 1/4-28 x 1-3/8 hex. hd. | |||
Part Number | Application | Note | QTY |
(Not used on 1001) | - | 1 | |
ACCELERATOR - Screw 1/4-28 x 1/8" hex. hd. | |||
Part Number | Application | Note | QTY |
(Not used on 1001) | - | 1 | |
ACCELERATOR - Screw 1/4-28 x 3/4 hex. hd | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Screw 1/4-28 x 7/8" hex. hd. | |||
Part Number | Application | Note | QTY |
(Used on 1001 only) | - | 3 | |
ACCELERATOR - Spring washer 1/4" | |||
Part Number | Application | Note | QTY |
- | (Use with clutch control) | 2 | |
ACCELERATOR - Taper pin No. 0 x 3/4" | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Washer 3/8" plain | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Washer 7/16" plain "Y" std | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Yoke end pin | |||
Part Number | Application | Note | QTY |
- | - | 1 | |
ACCELERATOR - Yoke end pin 1/4" | |||
Part Number | Application | Note | QTY |
- | (Use with clutch control) | 2 |