|
Keyword Search(Steering Wheel, Gasket, etc)
|
Group Number Search(3.686)
|
Part Number Search(450517)
|
|
|
|
|
1941-1947 - GROUP 9 - FUEL
9.1001 - CARBURETOR ASSEMBLY | |||
| Part Number | Application | Note | QTY |
1951- | STUD 5/16, TO MANIFOLD, (50.090) | 1 | |
2001-11-2100-11 | STUD 5/16, TO MANIFOLD, (50.090) | 1 | |
2003-06-2103-06-26 | STUD 3/8, SHORT, TO MANIFOLD, (50.090) | 2 | |
2000-10- | STUD 3/8, TO MANIFOLD, (50.090.) | 2 | |
2100-30 | STUD 3/8, TO MANIFOLD, (50.090.) | 2 | |
2003-06-2103-06-26 | STUD 3/8, LONG, TO MANIFOLD, (50.090) | 2 | |
2000-10-2100-30 | - | 1 | |
1951-2001-11-2101-11 | - | 1 | |
2003-06-2103-06-26 | - | 1 | |
1951-2001-11-03-06-2101-03-06-11-26 | LOCKWASHER 5/16 (50.200) | 4 | |
10-11-2100-01-03-06-11-26-30 | CONNECTOR, INLET, (50.725) 1951'2000-01 | 1 | |
2003-06-2103-06-26 | SPACER 3/8, MANIFOLD STUD, (50.200) | 1 | |
1951-2001-11-03-06-2101-03-06-11-26 | NUT 5/16-24, STUD, (50.100) | 4 | |
2000-10-2100- | NUT 3/8-24, STUD, (50.100) | 2 | |
9.1002 - REPAIR KIT | |||
| Part Number | Application | Note | QTY |
1951-2001-11-2101-11 | - | 1 | |
2000-10-2100-30 | - | 1 | |
2003-06-2103-06-26 | - | 1 | |
9.101 - GASKET SET | |||
| Part Number | Application | Note | QTY |
1951-2001-11-2101-11 | - | 1 | |
2000-10-2100-30 | - | 1 | |
2003-06-2103-06-26 | - | 1 | |
9.1015 - GASKET - CARBURETOR TO MANIFOLD | |||
| Part Number | Application | Note | QTY |
1951-2001-11-2101-11 | - | 2 | |
2003-06-2103-06-26 | LOWER | 1 | |
2003-06-2103-06-26 | UPPER | 1 | |
2000-10-2100-30 | - | 2 | |
9.102 - AIR CLEANER ASSEMBLY | |||
| Part Number | Application | Note | QTY |
1951-2000-01-10-11-2100-01-11-30 | GROMMET (50.940) | 1 | |
1951-2000-01-10-11- | INSULATION (50.925) | 1 | |
2100-01-11-30 | INSULATION (50.925) | 1 | |
1951-2000-01-10-11-2100-01-11-30 | SPACER | 1 | |
STD, 1951-2001-11-2101-11 | STANDARD | 1 | |
1951-2001-11-2101-11 | OIL BATH | 1 | |
2000-10-2100-30 | OIL BATH | 1 | |
STD, 2000-10-2100-30 | STANDARD | 1 | |
2003-06-2105-06-26 | - | 1 | |
1951-2000-01-10-11- | WASHER 5/16 (50.200) | 1 | |
2100-01-11-30 | WASHER 5/16 (50.200) | 1 | |
1951-2000-01-10-11-2100-01-11-30 | SCREW 5/16-18 X V8 (50.003) | 1 | |
9.1034 - BRACE - AIR CLEANER | |||
| Part Number | Application | Note | QTY |
1951-2000-01-10-11-2100-01-11-30 | - | 1 | |
9.1035 - BRACKET - AIR CLEANER AND SILENCER SUPPORT | |||
| Part Number | Application | Note | QTY |
2003-06-2103-06- | LOCKWASHER 3/8 (50.220) | 1 | |
2003-06 | STUD 3/8 X 1-13/32, TO CYLINDER HEAD | 1 | |
200 3-06-2103-06-26 | NUT 3/8-24 (50.100) | 1 | |
9.106 - COVER - AUTOMATIC CHOKE MANIFOLD HEAT CHAMBER | |||
| Part Number | Application | Note | QTY |
2000-10 | - | 1 | |
2000-03-06-10 | SCREW | 2 | |
2001-11 | - | 1 | |
200 3-06 | - | 1 | |
2001-11 | SCREW | 2 | |
9.109 - TUBE ASSEMBLY - AUTOMATIC CHOKE | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | UNION NUT | 1 | |
1951-2000-01-0 3-06-10-11- | UNION SLEEVE | 1 | |
2100-01-03-06-11-26-30 | UNION SLEEVE | 1 | |
1951 | - | 1 | |
2001-11-2101-11 | OT USED WITH MANIFOLD HAVING HEAT CHAMBER | 1 | |
2000-10-2100-30 | NOT USED WITH MANIFOLD HAVING HEAT CHAMBER | 1 | |
2006 | NOT USED WITH MANIFOLD HAVING HEAT CHAMBER | 1 | |
2003-2103-06-26 | NOT USED WITH MANIFOLD HAVING HEAT CHAMBER | 1 | |
2000-10 | WITH MANIFOLD HAVING HEAT CHAMBER COVER | 1 | |
2001-11 | USED WITH MANIFOLD HAVING HEAT CHAMBER | 1 | |
2003-06 | USED WITH MANIFOLD HAVING HEAT CHAMBER | 1 | |
9.1115 - SHIELD ASSEMBLY - HEAT | |||
| Part Number | Application | Note | QTY |
2003-06-2103-06-26 | - | 1 | |
9.113 - INSULATOR | |||
| Part Number | Application | Note | QTY |
1951-2001-11-2101-11 | - | 1 | |
2003-06-2103-06-26 | - | 1 | |
2100 | USED WITH ELECTROMATIC CLUTCH | 1 | |
9.11301 - BRACKET - CARBURETOR RETRACTING SPRING | |||
| Part Number | Application | Note | QTY |
2100 | USED WITH ELECTROMATIC CLUTCH | 1 | |
9.11302 - PIN - CARBURETOR RETRACTING SPRING | |||
| Part Number | Application | Note | QTY |
2100 | USED WITH ELECTROMATIC CLUTCH | 1 | |
2100 | LOCKWASHER #10 (50 . 230) | 1 | |
2100 | NUT 10 - 32 (50.003) | 1 | |
9.1131 - DETAILS OF CARBURETOR NO. 377734 (CARTER NO. WIA-530-S) | |||
| Part Number | Application | Note | QTY |
- | LOW SPEED JET ASSEMBLY (11-165$) | 1 | |
- | BODY FLANGE A SWITCH ASSEMBLY, (1-318S) | 1 | |
- | FLANGE GASKET - 1-1/4 S.A.E. (1A-17) | 1 | |
- | THROTTLE SHAFT A LEVER ASSEMBLY (3-447S) | 1 | |
- | AIR HORN A PISTON HOUSING ASSEMBLY (6-345$) | 1 | |
- | AIR HORN A CLIMATIC CONTROL ASSEMBLY | 1 | |
- | CHOKER VALVE (7-124) | 1 | |
- | VACUUM SPARK PASSAGE RIVET PLUG (11B-12) | 1 | |
- | STARTERATOR PASSAGE RIVET PLUG (11B-26) | 1 | |
- | NOZZLE PASSAGE RIVET PLUG (11B-41) | 1 | |
- | VACUUM SPARK PASSAGE RIVET PLUG (11B--42) | 1 | |
- | RIVET PLUG 1116-79) | 5 | |
- | IDLE PORT RIVET PLUG (LLB-108) | 1 | |
- | IDLE PLUG A GASKET ASSEMBLY (118-117$) | 1 | |
- | BALL RETAINER PLUG A GASKET ASSEMBLY | 1 | |
- | PASSAGE PLUG A GASKET ASSEMBLY (116-127$) | 2 | |
- | NOZZLE RETAINER PLUG (116-141) | 1 | |
- | NOZZLE (12-270) | 1 | |
- | CHOKE PISTON LEVER, LINK A SHAFT ASSEMBLY 114-222S) | 1 | |
- | CHOKER LEVER, SCREW A LINK ASSEMBLY | 1 | |
- | STRAINER NUT A GASKET ASSEMBLY (15-35$) | 1 | |
- | NEEDLE SEAT A PLUG GASKET (20-22) | 3 | |
- | METERING ROD JET & PLUG GASKET (20-26) | 3 | |
- | BOWL.STRAINER GASKET (20-35) | 1 | |
- | NOZZLE GASKET (20-45) | 1 | |
- | FLOAT, & LEVER ASSEMBLY (21-70S) | 1 | |
- | FLOAT LEVER PIN (24-15) | 1 | |
- | NEEDLE A SEAT ASSEMBLY (25-42S) | 1 | |
- | BOWL STRAINER GAUZE (30-14) | 1 | |
- | PISTON HOUSING STRAINER (30-23) | 1 | |
- | PUMP STRAINER (30-34) | 1 | |
- | IDLE ADJUSTMENT SCREW (30A-39) | 1 | |
- | SWITCH STRAINER (30-36) | 1 | |
- | VALVE ATTACHING SCREW (39-10) | 4 | |
- | PUMP JET (48-61) | 1 | |
- | SWITCH PLUNGER (49-128) | 1 | |
- | PUMP OPERATING LEVER A COUNTERSHAFT | - | |
- | PUMP ARM A COLLAR ASSEMBLY (53^-213$) | 1 | |
- | ADJUSTMENT SCREW SPRING (61-57) | 1 | |
- | METERING ROD SPRING (61-751 | 1 | |
- | CONNECTOR ROD SPRING (61-128) | 1 | |
- | PLUNGER SPRING (61-143) | 1 | |
- | ROCKER ARM SPRING (61-188) | 1 | |
- | SWITCH CONTACT SPRING (61-194) | 1 | |
- | VACUUM PISTON SPRING (61-233) | 1 | |
- | SWITCH RETURN SPRING (61-209) | 1 | |
- | PUMP OPERATING LEVER SPRING (61-228) | 1 | |
- | SWITCH STRAINER RETAINER ? | 1 | |
- | BALL RETAINER RING (63-45) | 1 | |
- | THERMOSTAT HOUSING RETAINER (63-48) | 3 | |
- | PLUNGER A ROD ASSEMBLY (64-55$) | 1 | |
- | METERING ROD - STANDARD (75-535) | 1 | |
- | METERING ROD - ONE SIZE LEAN (75-536) | 1 | |
- | METERING ROD - TWO SIZE LEAN (75-537) | 1 | |
- | FLANGE STUD LOCKWASHER (86-15) | 2 | |
- | TERMINAL LOCKWASHER (86-37) | 2 | |
- | COIL HOUSING ATTACHING SCREW (101-26) | 3 | |
- | THROTTLE SHAFT ARM CLAMP SCREW (101-28) | 1 | |
- | CHOKER LEVER CLAMP SCREW (101-78) | 1 | |
- | FAST IDLE CAM SCREW (101-81) | 1 | |
- | SWITCH TERMINAL SCREW (101-109) | 2 | |
- | TERMINAL CAP ATTACHING SCREW (101-112) | 1 | |
- | PISTON HOUSING SCREW A WASHER ASSEMBLY | 1 | |
- | BODY FLANGE SCREW A WASHER ASSEMBLY | 2 | |
- | BOWL COVER SCREW A WASHER ASSEMBLY! 101-148S) | 5 | |
- | AIR HORN SCREW A WASHER ASSEMBLY (101-151S) | 2 | |
- | FLANGE STUD NUT (105A-13) | 2 | |
- | THROTTLE SHAFT ARM A SCREW ASSEMBLY | 1 | |
- | THROTTLE CONNECTOR ROD (115-41) | 1 | |
- | BALL (116-13) | 2 | |
- | BWITCH BALL (116-19) | 1 | |
- | PUMP CONNECTOR LINK (117-58) | 1 | |
- | PISTON LINK A SPRING ASSEMBLY 1117-66$) | 1 | |
- | DUST COVER (118-28) | 1 | |
- | METERING ROD JET A GASKET ASSEMBLY | 15 | |
- | BODY FLANGE GASKET (121-72) | - | |
- | AIR HORN GASKET (121-51) | 1 | |
- | BOWL COVER GASKET (121-58) | 1 | |
- | COIL HOUSING GASKET (121-74) | 1 | |
- | METERING ROD DISK (129-15) | 1 | |
- | RETURN SPRING WASHER (136-53) | 1 | |
- | BOWL COVER A STRAINER ASSEMBLY (146-88S) | 1 | |
- | CNOKE PISTON PIN (150-62) | - | |
- | ANTI-PERCOLATOR PIN (150-92) | 1 | |
- | PIN SPRING (150A-10) | 3 | |
- | SWITCH CONTACT SPRING SHIM (.018) (153-11) | 1 | |
- | SWITCH CONTACT SPRING SHIM (.006) (153-12) | 1 | |
- | CHOKE PISTON (160-35) | 1 | |
- | VACUUM PISTON A PIN ASSEMBLY (160-67$) | 1 | |
- | THERMOSTATIC COIL A HOUSING ASSEMBLY | 1 | |
- | TERMINAL CAP HOLD-DOWN CLIP (172-12) | 1 | |
- | CABLE CL IP (172-19) | 1 | |
- | SWITCH GUIDE BLOCK (181-87) | 1 | |
- | FAST IDLE CAM A PIN ASSEMBLY (181-105S) | 1 | |
- | ANTI-PERCOLATOR CAP A ROCKER ARM ASSEMBLY | 1 | |
- | TERMINAL CAP ASSEMBLY (184-20S) | 1 | |
- | STARTER SWITCH UNIT (192-11U) | 1 | |
- | THROTTLE LEVER ADJUSTING SCREW (101 | 1 | |
- | THROTTLE VALVE (2-1011 | 1 | |
- | PUMP SPRING (61-171) | 1 | |
- | ASSEMBLY (53A-211S) | 1 | |
9.1132 - DETAILS OF CARBURETOR NO. 377735 (CARTER NO. WD0-5I2-S) | |||
| Part Number | Application | Note | QTY |
- | BODY FLANGE AND,SWITCH ASSEMBLY (1-3723) | 1 | |
- | THROTTLE VALVE (2-103) | 2 | |
- | THROTTLE SHAFT AND LEVER ASSEMBLY (3-4543) | 1 | |
- | AIR HORN AND CLIMATIC CONTROL ASSEMBLY (6-3683) | 1 | |
- | AIR HORN AND PUMP JET ASSEMBLY (6-3823) | 1 | |
- | AIR HORN A PUMP JET ASSEMBLY (6-3813) | 1 | |
- | CHOKER VALVE (7-113) | 1 | |
- | CHOKER VALVE (7-123) | 1 | |
- | LOW SPEED JET ASSEMBLY (11-163S) | 2 | |
- | LOW SPEED JET ASSEMBLY (11-1633) | 2 | |
- | BODY FLANGE RIVET PLUG (11B-26) | 2 | |
- | PUMP DISCHARGE RIVET PLUG (11B-41) | 1 | |
- | RIVET PLUG L116-79) | 5 | |
- | RIVET PLUG (11B-79) | 5 | |
- | IDLE PORT RIVET PLUG (11B-108) | 2 | |
- | NOZZLE PASSAGE PLUG (11B-126) | 2 | |
- | RIVET PLUG (IIB-I34) | 2 | |
- | RIVET PLUG (11B-134) | 2 | |
- | NOZZLE RETAINER PLUG (118-141) | 2 | |
- | BY-PASS BLEEDER SCREW PLUG (11B-159) | 2 | |
- | NOZZLE 112-262) | 2 | |
- | NOZZLE (12-259) | 2 | |
- | CHOKER PISTON LEVER, LINK A SHAFT ASSEMBLY | 1 | |
- | CHOKER PISTON LAVER, LINK A SHAFT ASSEMBLY | 1 | |
- | CHOKER TRIP LEVER (14-249) | 1 | |
- | STRAINER NUT AND GASKET ASSEMBLY (15-35S) | 1 | |
- | STRAINER NUT A GASKET ASSEMBLY (15-3531 | 1 | |
- | PUMP CHECK NEEDLE (17-50) | 1 | |
- | NEEDLE SEAT GASKET (20-22) | 1 | |
- | BOWL STRAINER GASKET (20-35) | 1 | |
- | NOZZLE GASKET (20-45) | 2 | |
- | NOZZLE GASKET (UPPER) (20-45) | 2 | |
- | METERING ROD JET GASKET (20-54) | 2 | |
- | IDLE PASSAGE GASKET (20-55) | 3 | |
- | FLOAT AND LEVER ASSEMBLY (21-645) | 1 | |
- | FLOAT & LEVER ASSEMBLY (21-643) | 1 | |
- | FLOAT LEVER PIN (24-24) | 1 | |
- | NEEDLE AND SEAT ASSEMBLY (25-98S) | 1 | |
- | NEEDLE A SEAT ASSEMBLY (25-983) | 1 | |
- | BOWL COVER STRAINER GAUZE (30-14) | 1 | |
- | PISTON HOUSING STRAINER (30-23) | 1 | |
- | PUMP STRAINER (30-34) | 1 | |
- | SWITCH STRAINER (30-36) | 1 | |
- | IDLE ADJUSTMENT SCREW (30A-41) | 2 | |
- | VALVE ATTACHING SCREW (39-10) | 2 | |
- | CHOKE VALVE ATTACHING SCREW (39-10) | 2 | |
- | SWITCH PLUNGER (49-128) | 1 | |
- | ANTI-PERCOLATOR VALVE PLUG ASSEMBLY | 2 | |
- | ANTI-PERCOLATOR VALVE PLUG ASSEMBLY (49A | 2 | |
- | FAST IDLE ARM, PIN AND SCREW ASSEMBLY | 1 | |
- | FAST IDLE ARM, PIN A SCREW ASSEMBLY (53 | 1 | |
- | PUMP OPERATING LEVER & COUNTERSHAFT ASSEMBLY (53A-164S) | 1 | |
- | PUMP OPERATING LEVER A COUNTERSHAFT | 1 | |
- | PUMP ARM AND COLLAR ASSEMBLY (53A-216S) | 1 | |
- | ADJUSTMENT SCREW LOCK SPRING (61-57) | 2 | |
- | METERING ROD SPRING (61 | 1 | |
- | CONNECTOR LINK SPRING (61-123) | 1 | |
- | CONNECTOR ROD SPRING (61-128) | 1 | |
- | FAST IDLE ARM SPRING (61-142) | 1 | |
- | PLUNGER SPRING (61-143) | 1 | |
- | PUMP SPRING (61-171) | 1 | |
- | SWITCH CONTACT SPRING (61-194) | 1 | |
- | VACUUM PISTON SPRING (61-199) | 1 | |
- | SWITCH RETURN SPRING (61-209) | 1 | |
- | PUMP ARM SPRING (61-212) | 1 | |
- | FAST IDLE CAM SPRING (61-229) | 1 | |
- | SPRING RETAINER (63-35) | 1 | |
- | SWITCH STRAINER RETAINER RING (63-43) | 1 | |
- | BALL RETAINER RING (63-45) | 1 | |
- | HOUSING RETAINER (63-48) | 2 | |
- | THERMOSTAT HOUSING RETAINER (63-481 | 2 | |
- | PUMP PLUNGER AND ROD ASSEMBLY (64-71S) | 1 | |
- | PUMP PLUNGER AND ROD ASSEMBLY (64-598) | 1 | |
- | METERING ROD - STANDARD (75-4511 | 2 | |
- | METERING ROD - STANDARD (75-538) | 2 | |
- | METERING ROD - 1 SIZE LEAN (75-519) | 2 | |
- | METERING ROD - 2 SIZES LEAN (75-520) | 2 | |
- | FLANGE STUD LOCKWASHER (86-12) | 3 | |
- | FLANGE STUD LOCKWASHER (86-12) | 4 | |
- | BODY FLANGE ATTACHING SCREW LOCKWASHER | 1 | |
- | BODY FLANGE LOCKWASHER (86-17) | 1 | |
- | SWITCH TERMINAL LOCKWASHER (86-37) | 2 | |
- | TERMINAL LOCKWASHER (86-37) | 2 | |
- | CLAMP SCREW (101-10) | 1 | |
- | COIL HOUSING ATTACHING SCREW (101-26) | 2 | |
- | TRIP ATTACHING | - | |
- | CHOKER SHAFT ATTACHING SCREW (101-65) | 1 | |
- | THROTTLE CENTERING SCREW (101-69) | 1 | |
- | FAST IDLE ARM ATTACHING SCREW (101-70) | 1 | |
- | THROTTLE VALVE ATTACHING SCREW (101-73) | 4 | |
- | THROTTLE SHAFT ARM ATTACHING SCREW (101-74) | 1 | |
- | FAST IDLE ADJUSTMENT SCREW (101-84) | 1 | |
- | SWITCH TERMINAL SCREW (101-109) | 2 | |
- | TERMINAL CAP ATTACHING SCREW (101-112) | 1 | |
- | THROTTLE LEVER ADJUSTMENT SCREW (101-121) | 1 | |
- | BODY FLANGE ATTACHING SCREW (101-1241 | 1 | |
- | BODY FLANGE ATTACHING SCREW (101-124) | 1 | |
- | AIR HORN ATTACHING SCREW (SPECIAL) (101-128) | 1 | |
- | THROTTLE VALVE ATTACHING SCREW (101-126) | 1 | |
- | AIR HORN ATTACHING SCREW - SPECIAL (101-128) | 1 | |
- | BODY FLANGE ATTACHING SCREW & WASHER ASSEMBLY (101-149S) | 4 | |
- | BODY FLANGE SCREW A WASHER ASSEMBLY (101-1495) | 3 | |
- | BOWL COVER ATTACHING SCREW & WASHER ASSEMBLY | 6 | |
- | BOWL COVER SCREW A WASHER ASSEMBLY | 6 | |
- | AIR HORN ATTACHING SCREW AND WASHER ASSEMBLY | 2 | |
- | AIR HORN SCREW A WASHER ASSEMBLY (101 | 2 | |
- | FLANGE STUD NUT (105A-11) | 3 | |
- | FLANGE STUD NUT (105 -11) | 4 | |
- | ANTI-PERCCLATOR ARM AND SCREW ASSEMBLY | 1 | |
- | ANTI-PERCOLATOR ARM & SCREW ASSEMBLY | 1 | |
- | THROTTLE SHAFT ARM (114-39) | 1 | |
- | THROTTLE CONNECTOR ROD (115-66) | 1 | |
- | THROTTLE CONNECTOR ROD (115-57) | 1 | |
- | BAL I (116-13) | 1 | |
- | SWITCH BALL (116-19) | 1 | |
- | UMP ARM LINK (117-58) | 1 | |
- | PUMP ARM LINK (117-58) | 1 | |
- | FAST IDLE CONNECTOR LINK (117-78) | 1 | |
- | DUST COVER (118-33) | 1 | |
- | METERING ROD JET & GASKET ASSEMBLY! | 2 | |
- | METERING ROD JET ASSEMBLY ( | 2 | |
- | BODY FLANGE GASKET (121-43) | 1 | |
- | AIR HORN GASKET (121-61) | 1 | |
- | BOWL COVER GASKET (121-63) | 1 | |
- | COIL HOUSING GASKET (121-74) | 1 | |
- | METERING ROD DISK (129-12) | 2 | |
- | CHOKER SHAFT WASHER (136-34) | 1 | |
- | CONNECTOR ROD WASHER (136-37) | 1 | |
- | PUMP CHECK BALL (116-13) | 1 | |
- | THROTTLE SHAFT WASHER (136-38) | 1 | |
- | THROTTLE SHAFT WASHER (156-38) | 1 | |
- | RETURN SPRING WASHER | 1 | |
- | RETURN SPRING WASHER (136-53) | 1 | |
- | BOWL COVER AND STRAINER ASSEMBLY (146-108S) | 1 | |
- | BOWL COVER & STRAINER ASSEMBLY (146-108S) | 1 | |
- | CHOKE PISTON PIN (150-62) | 1 | |
- | METERING ROD PIN (150-81) | 1 | |
- | PIN SPRING (150A-10) | 5 | |
- | PIN SPRING (150A-10) | 4 | |
- | COUNTERSHAFT PIN SPRING (150A-14) | 1 | |
- | SWITCH CONTACT SPRING SHIM (.018) (153-111 | 1 | |
- | SWITCH CONTACT SPRING SHIM (.018) (153-11) | 1 | |
- | SWITCH CONTACT SPRING SHIM (.006) (153-12) | 1 | |
- | CHOKE PISTON (160-35) | 1 | |
- | VACUUM PISTON & LINK ASSEMBLY (16O-58S) | 1 | |
- | VACUUM PISTON & LINK ASSEMBLY (160-585) | 1 | |
- | THERMOSTATIC COIL A HOUSING ASSEMBLY | 1 | |
- | HOLD-DOWN CLIP (TERMINAL CAP) (172-12) | 1 | |
- | TERMINAL CAP HOLD-DOWN CLIP 1172-12) | 1 | |
- | CABLE CLIP (172-18) | 1 | |
- | SWITCH GUIDE BLOCK (181-87) | 1 | |
- | FAST IDLE CAM ASSEMBLY (181-110S) | 1 | |
- | TERMINAL CAP ASSEMBLY (184-20S) | 1 | |
- | CARTER STARTER SWITCH UNIT (192-11U) | 1 | |
- | THROTTLE SHAFT ARM (114-35) | 1 | |
- | METERING ROD - ONE SIZE LEAN (75 539) | 2 | |
- | METERING ROD - TWO SIZE LEAN (75 540) | 2 | |
- | NOZZLE PASSAGE PLUG (11B-127S) | 2 | |
- | NOZZLE RETAINER PLUG (11B-141) | 2 | |
- | PUMP ARM SPRING (61-151) | 1 | |
- | COIL HOUSING ATTACHING SCREW (101-26) | 2 | |
9.11354 - LINKAGE KIT - CARBURETOR THROTTLE CONTROL | |||
| Part Number | Application | Note | QTY |
2000-10 | USED WITH ELECTROMATIC CLUTCH | 1 | |
2001-11 | USED WITH ELECTROMATIC CLUTCH | 1 | |
2005-06 | USED WITH ELECTROMATIC CLUTCH | 1 | |
-10-2100-30 | - | 1 | |
2001-11-2101-11 | - | 1 | |
2003-06-2103-06-26 | - | 1 | |
9.11355 - PEDAL - ACCELERATOR | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
9.11356 - BRACKET - ACCELERATOR PEDAL HINGE | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
1951-2000-01-03- | LOCKWASHER 1/4 (50.220) | 2 | |
11-26-30 | SCREW 1/4-28 X 1/2 RND. HD. (50.000) | 2 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | NUT 1/4-28 | 2 | |
9.11357 - PIN - ACCELERATOR PEDAL HINGE | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
9.11358 - RETAINING RING - ACCELERATOR PEDAL HINGE PIN | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-05-06-11-26-30 | - | 1 | |
9.11359 - ROD - ACCELERATOR PEDAL PUSH | |||
| Part Number | Application | Note | QTY |
1951-200 | SURINQ WASHER 1/4 (50.242) | 1 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | WASHER 1/4 (50.200) | 1 | |
- | COTTER PIN 1/16 X 1/2 (50.240) | 1 | |
9.11361 - LEVER - ACCELERATOR PEDAL PUSH ROD | |||
| Part Number | Application | Note | QTY |
- | - | 1 | |
9.11362 - BRACKET - ACCELERATOR PEDAL PUSH ROD LEVER | |||
| Part Number | Application | Note | QTY |
1951 | - | 1 | |
2000-01-10-11-2100-01-11 | - | 1 | |
2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
2000-01-03-06-10-11-2100-01-03-06-11-26-30 | LOCKWASHER 1/4 EXTERNAL (50 | 2 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | SCREW 1/4-28 X 9/16 CONICAL POINT (50.000) | 2 | |
9.11363 - PIN - ACCELERATOR PEDAL PUSH ROD LEVER | |||
| Part Number | Application | Note | QTY |
1951 | - | 1 | |
2000-01-10-11-2100-01-11 | - | 1 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | WASHER | 2 | |
2000-01-03-06-10-11-2100-01-0 3-06-11-26-30 | - | 1 | |
- | COTTER OLN 1/16 X 1/2 (50.240) | 1 | |
9.11364 - ROD - ACCELERATOR PEDAL PUSH ROD LEVER TO RELAY LEVER | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11- | CLEVIS CLIP | 1 | |
2100-01-03-06-11-26-30 | CLEVIS CLIP | 1 | |
1951- | NUT #10-32 LH THREAD | 1 | |
2000-01-05-06-10-11-2100-01-03-06-11- | NUT #10-32 LH THREAD | 1 | |
1951-2000-01-10-11 | NUT #10-32 LH THREAD | 1 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | NUT #10-32 LH THREAD | 1 | |
01-03-06-10-11-2100-01-03-06-11-26-30 | NUT #10-32 LH THREAD | 1 | |
1951-2000-01-10-11 | TURNBUCKLE, USED WITH ELECTROMATIC CLUTCH | 1 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
1951- | SHORT, USED WITH ELECTROMATIC CLUTCH | 1 | |
2000-01-10-11 | SHORT, USED WITH ELECTROMATIC CLUTCH | 1 | |
1951-2000-01-03-06-10-11-2100-01-0 3-06-11-26 | SHORT, USED WITH OVERDRIVE | 1 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26 | 73H4 LONG, USED WITH OVERDRIVE | 1 | |
1951- | LONG, USED WITH ELECTROMATIC CLUTCH | 1 | |
2000-01-10-11 | LONG, USED WITH ELECTROMATIC CLUTCH | 1 | |
2100-01-11 | USED WITH ELECTROMATIC CLUTCH | 1 | |
9.11365 - ROD - ACCELERATOR PEDAL LEVER TO RELAY LEVER | |||
| Part Number | Application | Note | QTY |
2001-11-2101-11 | - | 1 | |
2000-10-2100 | - | 1 | |
2000-10-2100 | WASHER 3/16 1 50.200) | 2 | |
2000-10-2100 | COTTER PIN 1/16 X 1/2 (50.240) | 2 | |
9.11366 - SPRING - ACCELERATOR PEDAL RETRACTING | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
9.11367 - WEATHER SEAL - ACCELERATOR PUSH ROD | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
9.11368 - ROD - ACCELERATOR RELAY LEVER TO CARBURETOR THROTTLE BELL CRANK | |||
| Part Number | Application | Note | QTY |
2000-10-2100-30 | CLEVIS CLIP, LEFT | 1 | |
2000-10-2100-30 | CLEVIS CLIP, RIGHT | 1 | |
2000-10-2100-30 | NUT #10-32, LH THREAD | 1 | |
2000-10-2100 | - | 1 | |
2000-10-2100-30 | TURNBUCKLE | 1 | |
2000-10-2100-30 | SHORT | 1 | |
2000-10-2100-30 | LONG | 1 | |
2000-10-2100 | SHORT, USED WITH OVERDRIVE | 1 | |
2000-10-2100 | LONG | 1 | |
2000-10-2100 | LONG, USED WITH OVERDRIVE | 1 | |
2000-10-2100 | WASHER 3/16 (50.2001 | 1 | |
2000-10-2100 | COTTER PIN 1/16 X 1/2 (50.240) | 1 | |
2000-10-2100-30 | NUT #10-32, (50.100) | 1 | |
9.11369 - ROD - ACCELERATOR RELAY LEVER TOCARBURETOR THROTTLE BELL CRANK | |||
| Part Number | Application | Note | QTY |
2001-11-2101-11 | SPRING WASHER | 1 | |
2001-11-2101-11 | NUT #10-32. LH | 1 | |
2001-11-2101-11 | - | 1 | |
2001-11-2101-11 | TURNBUCKLE | 1 | |
2001-11- | SHORT, USED WITH OVERDRIVE | 1 | |
2101-11 | SHORT, USED WITH OVERDRIVE | 1 | |
2001-11-2101-11 | LONG | 1 | |
2001-11- | LONG, USED WITH OVERDRIVE | 1 | |
2101-11 | LONG, USED WITH OVERDRIVE | 1 | |
2001-11-2101-11 | WASHER 3/16 (50.200) | 2 | |
2001-11- | COTTER PIN 1/16 X 1/2 (50.240) | 2 | |
2101-11 | COTTER PIN 1/16 X 1/2 (50.240) | 2 | |
2001-11-2101-11 | NUT #10-32 (50.100) | 1 | |
9.11370 - ROD ASSEMBLY - ACCELERATOR RELAY LEVER TO CARBURETOR THROTTLE OPERATING LEVER | |||
| Part Number | Application | Note | QTY |
2100-01-03-06-11-26 | CLEVIS CLIP | 1 | |
R0D 2100-01-03-06-11-26 | NUT F10-32, ROD END | 1 | |
2101-11 | USED WITH ELECTRONS!IC CLUTCH | 1 | |
2100-01-03-06-11-26 | WASHER 1/4, ROD END PIN (90.200) | 1 | |
2103-06-26 | USED WITH'ELECTROMATIC CLUTCH | 1 | |
- | USED WITH ELECTROMALIC CLUTCH, 210C | 1 | |
2100-01-03-06-11-26 | CETTER PIN 1/16 X 1/2, ROD END PIN (50.240) | 1 | |
9.11371 - ROD - ACCELERATOR RELAY LEVER TO CARBURETOR THROTTLE OPERATIH8 LEVER (LEFT) | |||
| Part Number | Application | Note | QTY |
1951-2001-03-06-11-2103-06- | CLEVIS ELLS | 1 | |
1951-2001-03-06-11- | NUT 10-32, LH | 1 | |
2103-06-26 | NUT 10-32, LH | 1 | |
1951-2001-03-06-2103-06-26 | TURNBUCKLE | 1 | |
2000 | LONG, USED WITH ELECTROMATICCLUTCH | 1 | |
1951- | SHORT, USED WITH ELECTROMATIC CLUTCH | 1 | |
2000-01-03-06 | SHORT, USED WITH ELECTROMATIC CLUTCH | 1 | |
1951- | LONG, USED WITH ELECTROMATICCLUTCH | 1 | |
2001-11 | LONG, USED WITH ELECTROMATICCLUTCH | 1 | |
SH0RT, 1951-2001-03-06-2101-03-06-11-26 | - | 1 | |
1951-2001-11-2101-11 | LONG | 1 | |
1951 | LONG, USED WITH ELECTROMATIC CLUTCH WITH | 1 | |
2003-06-2103-06-26 | LONG | - | |
2001-11 | LONG, USED WITH ELECTROMATIC CLUTCH WITH | 1 | |
2000-10 | LPNG, USED WITH ELECTROMATIC CLUTCH WITH | 1 | |
1951-2001-03-06-11- | WASHER 3/16 (50.200) | 2 | |
2103-06-26 | WASHER 3/16 (50.200) | 2 | |
1951- | WASHER 3/16 (50.200) | 2 | |
2000-01-0 3 06-10-11 | WASHER 3/16 (50.200) | 2 | |
1951-2001-03-06-11-2103-06-26 | COTTER PIN 1/16 X 1/2 (50.240) | 1 | |
1951- | COTTER PIN 1/16 X 1/2 (50.240) | 2 | |
2000-01-03-06-11 | COTTER PIN 1/16 X 1/2 (50.240) | 2 | |
1951-2001-03-06-11- | NUT 10-32 (50.100) | 1 | |
2103-06-26 | NUT 10-32 (50.100) | 1 | |
9.11372 - SHAFT AND BRACKET ASSEMBLY - ACCELERATOR RELAY LEVERS | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
2001-11-2101-11 | SPACER | 1 | |
2001-11-2101-11 | - | 1 | |
2000-10-2100 | - | 1 | |
1951-2000-01-10-11-2100-01-11 | USED WITH ELECTROMATIC CLUTCH | 1 | |
2126 | - | 1 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | LOCKWASHER 1/4 (50.220) | 2 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | SCREW 1/4-20 X 1/2 (50.000) | 2 | |
2000-10-2100 | SCREW 1/4-20 X 1/2 (50.000) | 4 | |
2001-11-2101-11 | SCREW 1/4-20 X 3/4 (50.000) | 2 | |
9.11373 - BRACKET ASSEMBLY - ACCELERATOR RELAY LEVER SHAFT | |||
| Part Number | Application | Note | QTY |
2000-10-2100 | - | 2 | |
9.135 - ROD - CARBURETOR THROTTLE OPERATING | |||
| Part Number | Application | Note | QTY |
2003-06-2103-06-26 | USED WITH ELECTROMATIC CLUTCH | 2 | |
2101-03-06-11-26 | USED WITH ELECTROMATIC CLUTCH | 2 | |
8752 2000-10-2100- | CLEVIS CLIP, BELL CRANK END | 1 | |
2000-10-2100- | CLEVIS CLIP, CARBURETOR END | - | |
7283 1951 | - | - | |
2001-11-2101- | USED WITH ELECTROMATIC CLUTCH | 1 | |
2000-10-2100-30 | NUT 10-32, LH | 1 | |
1951-2000-03-06-10- | NUT 10-32, LH | 1 | |
2100-03-06-11-26-30 | NUT 10-32, LH | 1 | |
2103-06-26 | NUT 10-32, LH | 1 | |
2101-11 | NUT 10-32, LH | 1 | |
06-2103-06-26 | NUT 10-32, LH | 1 | |
1951-2001-03-06-11- | NUT 10-32, LH | 1 | |
2100-03-06-11-26 | NUT 10-32, LH | 1 | |
2101-03-06-11-26 | NUT 10-32, LH | 2 | |
03-06-11-2101-03-06-11-26 | NUT 10-32, LH | 1 | |
2101-03-06-11-26 | NUT 10-32, LH | 1 | |
2001-11-2101-11 | INSTRUMENT BOARD | 1 | |
7312 2000-10-2100-30 | TURNBUCKLE | - | |
2000-10-2100-30 | LONG | 1 | |
3085 SH0RT, 2000-10-2100-30 | - | - | |
6638 2001-11-2101-11 | - | - | |
8142 2003-06-2103-06-26 | - | 1 | |
2001-11-2101-11 | LONG | 1 | |
9.136 - BELL CRANK - CARBURETORTHROTTLE OPERATING | |||
| Part Number | Application | Note | QTY |
2000-10-2100-30 | SPRING WASHER, LOWER BELL CRANK, (50.242) | - | |
2000-10-2100-30 | UPPER | - | |
2100 | UPPER | - | |
2000-10-2100-30 | LOWER | - | |
2000-10-2100-30 | PIN, UPPER BELL CRANK | 1 | |
2100-30 | PIN, UPPER BELL CRANK | 1 | |
9.1363 - BELL CRANK AND BRACKET ASSEMBLY CARBURETOR THROTTLE OPERATING | |||
| Part Number | Application | Note | QTY |
3286 2000-10-2100-30 | SCREW 3/8-16 X 5/8 HEX. HD. (50.100) | 2 | |
2000-10-2100-30 | SCREW 3/8-16 X 5/8 HEX. HD. (50.100) | 2 | |
10-2100-30 | SCREW 3/8-16 X 5/8 HEX. HD. (50.100) | 2 | |
9.1364 - BRACKET A NO. ST00 ASSEMBLY - CARBURETOR THROTTLE OPERATING BELL CRANK | |||
| Part Number | Application | Note | QTY |
2000-10-2100-30 | STUD | 11 | |
2000-10-2100-30 | - | - | |
9.1366 - LINK - CARBURETOR THROTTLE OPERATING BELL CRANK | |||
| Part Number | Application | Note | QTY |
2000-10-2100-30 | CLEVIS CLIP, UPPER | 1 | |
2000-10-2100-30 | CLEVIS CLIP, LOVER | 1 | |
2000-10-2100-30 | - | 1 | |
9.137 - SPRING - CARBURETOR THROTTLE OPERATING BELL CRANK RETRACTING | |||
| Part Number | Application | Note | QTY |
2000-10 | USED WITH ELECTROMATIC CLUTCH | 1 | |
2101-11 | USED WITH ELECTROMATIC CLUTCH | 1 | |
2103-06-26 | USED WITH ELECTROMATIC CLUTCH | 1 | |
9.139 - SPRING - CARBURETOR THROTTLE OPERATING R00 RETRACTING | |||
| Part Number | Application | Note | QTY |
1951-2001-03-06-11 | USED WITH ELECTROMATIC CLUTCH | 1 | |
2000-10-2100-30 | - | 1 | |
9.140 - BRACKET - CARBURETOR THROTTLE OPERATING R00 RETRACTING SPRING | |||
| Part Number | Application | Note | QTY |
1951-2001- | USED WITH ELECTROMATIC CLUTCH | 1 | |
1111 | USED WITH ELECTROMATIC CLUTCH | 1 | |
2003-06- | USED WITH ELECTROMATIC CLUTCH | 1 | |
2101-03-06-11-26 | USED WITH ELECTROMATIC CLUTCH | 1 | |
9.1415 - SHAFT AND BRACKET ASSEMBLY - CARBURETOR THROTTLE OPERATING | |||
| Part Number | Application | Note | QTY |
1951-2001-11-2101-11 | USED WITH ELECTROMATIC CLUTCH | - | |
1951-2001-11-2101-11 | - | - | |
2003 | LEFT, USED WITH ELECTROMATIC CLUTCH | 1 | |
11-2101-11 | LEFT, USED WITH ELECTROMATIC CLUTCH | 1 | |
2001-03-06- | LEFT, USED WITH ELECTROMATIC CLUTCH | 1 | |
7767 | LEFT, USED WITH ELECTROMATIC CLUTCH | 1 | |
11-2101-03-06-11-26 | LEFT, USED WITH ELECTROMATIC CLUTCH | 1 | |
6048 | LEFT, USED WITH ELECTROMATIC CLUTCH | X | |
5502 | LEFT, USED WITH ELECTROMATIC CLUTCH | X | |
1951-2001-03-06- | LEFT, USED WITH ELECTROMATIC CLUTCH | 2 | |
3870 | LEFT, USED WITH ELECTROMATIC CLUTCH | 2 | |
2003-06-2103-06-26 | - | - | |
9.142 - SHAFT - CARBURETOR THROTTLE OPERATING | |||
| Part Number | Application | Note | QTY |
06-11-26 | PIN (50.805) | 1 | |
1951-2001-03-06-11-2101-05-06-11-26 | SERINQ WASHER (50.242) | 1 | |
1951-2001-03-06-11- | WASHER 5/16 (50.200) | 1 | |
2101-05-06-11-26 | WASHER 5/16 (50.200) | 1 | |
1951-2001-11-2101-11 | - | 1 | |
2003-06-2103-06-26 | - | 1 | |
1951-2001-11-2101- | WASHER 5/16 (50.200) | 1 | |
2003-06-2103-06-26 | WASHER 5/16 (50.200) | 1 | |
9.143 - BRACKET - CARBURETOR THROTTLE OPERATING SHAFT | |||
| Part Number | Application | Note | QTY |
2003-06-2103-06-26 | RIGHT | 1 | |
1951-2001-11-2101-11 | RIGHT | 1 | |
1951-2001-11-2101-11 | LEFT | 1 | |
2003-06-2103-06-26 | LEFT | 1 | |
9.144 - LEVER - CARBURETOR THROTTLE OPERATING SHAFT | |||
| Part Number | Application | Note | QTY |
2001-03-06-11-2101-0 3-06- | PIN (50.805) | 2 | |
1951-2001-11-2101-11 | LEFT | 1 | |
1951-2001-03-06-11-2101-03-06-11-26 | RIGHT | 1 | |
2003-06-2103-06-26 | LEFT, USED WITH ELECTROMATIC CLUTCH | 1 | |
2003-06-2103-06-26 | LEFT | 1 | |
9.16055 - BULB | |||
| Part Number | Application | Note | QTY |
2000-01-03-06-10-11-2100-01-03-06-11-26-30 | MAZDA #1129, 6V-21-3C.P., WITH DIRECTION | 2 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | MAZDA #1154, 6V-21-3C.0. 150.960) | 2 | |
9.200 - PUMP ASSEMBLY - FUEL | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
01-03-06-10-11-2100-01-03-06-11-26-30 | SCREW 3/8-16 X 1-3/4 (50.003) | 2 | |
1951-2000-01-03-06- | SCREW 3/8-16 X 1-3/4 (50.003) | 2 | |
1951-2001-11-2101-11 | - | 1 | |
2000-10-2100-30 | - | 1 | |
2003-06-2103-06-26 | - | 1 | |
2003-06-2103-06-26 | CONNECTION, GASOLINE OUTLET | 1 | |
1951-2000-01-10-11-2100-01-11-30 | CONNECTION, GASOLINE OUTLET | 1 | |
9.2001 - REPAIR KIT | |||
| Part Number | Application | Note | QTY |
1072 2000-10-2100-30 | - | 1 | |
51074 1951-2001-03-06-11-2101-03-06-11-26 | - | 1 | |
9.201 - BUSHING - INSULATOR | |||
| Part Number | Application | Note | QTY |
- | - | 1 | |
9.2017 - ELBOW-GASOLINE INLET | |||
| Part Number | Application | Note | QTY |
- | - | 1 | |
9.203 - GASKET | |||
| Part Number | Application | Note | QTY |
1951-2000-01-0 3-06-10-11-2100-01-0 3-06-11-26-30 | - | 1 | |
9.2035 - SHIELD ASSEMBLY - HEAT | |||
| Part Number | Application | Note | QTY |
2000-10-2100-30 | - | 1 | |
1951 | - | 1 | |
2003-06-2103-06-26 | - | 1 | |
2001-11-2101-11 | - | 1 | |
9.2036 - BRACKET - HEAT SHIELD LOWER | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | LOCKWASHER #10 (50.220) | 2 | |
1951-2000-01-03-06-10-11- | SCREW #10-32 X 1/4, LOWER BRACKET | 2 | |
2100-01-03-06-11-26-30 | SCREW #10-32 X 1/4, LOWER BRACKET | 2 | |
9.205 - WASHER - INSULATING | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-0 5-06-11-26-30 | - | 2 | |
9.209 - TUBE ASSEMBLY - FUEL PUMP TO CARBURETOR | |||
| Part Number | Application | Note | QTY |
06021 | NUT 5/16 WEATHERHEAD (50.725) | 2 | |
1951-2001-11-2101-11 | - | 1 | |
2000-10-2100-30 | - | 1 | |
2003-06-2103-06-26 S | - | 1 | |
9.300 - TANK ASSEMBLY R GASOLINE | |||
| Part Number | Application | Note | QTY |
1951-2000-01-10-11-2100-01-11-30 | - | 1 | |
2003-06-2103-06 | - | 1 | |
2126 | - | 1 | |
1951-2 | DRAIN OLUQ 1/4-18 (50-720) | 1 | |
9.302 - CAP ASSEMBLY - INLET | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
9.3055 - WHISTLE ASSEMBLY - INLET VENT | |||
| Part Number | Application | Note | QTY |
26-30 | I95I-2OOO-OI-O3-O6-IO-U-2IOO-OI-O5-O6-II | 1 | |
9.306 - STRAP AND ANTI-SQUEAK ASSEMBLY R SUPPORT | |||
| Part Number | Application | Note | QTY |
2003-06-2103-06 | - | 2 | |
1951-2000-01-10-11-2100-01-11-30 | - | 2 | |
9.307 - ANTI-SQUEAK - SUPPORT STRAP | |||
| Part Number | Application | Note | QTY |
1951-2000-01-10-11-2100-01-11-30 | - | 2 | |
2003-06-2103-06-26 | - | 2 | |
9.308 - TEE BOLT - SUPPORT | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 2 | |
- | LOCKWASHER 3/8(50.220) | 2 | |
- | NUT 3/8-24 (50.100) | 2 | |
9.309 - LINER - GASOLINE TANK TO FRAME | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | TUBING | 2 | |
9.400 - TUBE ASSEMBLY - GASOLINE MAIN | |||
| Part Number | Application | Note | QTY |
1951-20 | NUT. 5/16 FLARED TUBE (50.725) | 1 | |
01-03-06-10-11-2100-01-03-06-11-26-30 | NUT. 5/16 FLARED TUBE (50.725) | 1 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | SCREW 5/16-18 X 9/16 HEX. HD., WASHER | 1 | |
1951 | - | 1 | |
2001-11-2101-11 | - | 1 | |
2005-06-2103-06 | - | 1 | |
2000-10-2100-30 | - | 1 | |
2126 | - | 1 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | CONNECTOR, 5/16 FLARED TUBE (50.725) | 1 | |
9.4005 - CLIP - TUBE | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-0 3-06-11-26-30 | SCREW 5/16-18 X 9/16 HEX. HD., WASHER | 1 | |
1951-2000-01-10-11-2100-01-11-30 | TO FRONT CHANNEL | 1 | |
- | - | 7 | |
2126 | - | 6 | |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | TO FRAME | 1 | |
200 3-06-2103-06-26 | TO ENGINE STABILIZER SUPPORT | 1 | |
9.4006 - CONNECTION - TUBE FRAME | |||
| Part Number | Application | Note | QTY |
1951-2000-10-2100-30 | - | 1 | |
2001-11-2101-11 | - | 1 | |
2003-06-2103-06-26 | - | 1 | |
9.406 - HOSE ASSEMBLY - FUEL PUMP INLET | |||
| Part Number | Application | Note | QTY |
1951-2000-01-03-06-10-11-2100-01-03-06-11-26-30 | - | 1 | |
