|
Keyword Search(Steering Wheel, Gasket, etc)
|
Group Number Search(3.686)
|
Part Number Search(450517)
|
|
|
|
|
Group Number '9' Search Results
1933-1936 Eight | |||||
| Group Number | Group Name | Part Number | Application | Note | QTY |
Elbow 5/16" flared tube Inverted (Weatherhead) | - | X | |||
Gasoline tank assembly | (Used on 1001 only) | X | |||
Gasoline tank assembly | (Used, on 1002-5-4 only) | X | |||
Gasoline tank assembly | - | X | |||
Gasoline tank drain plug 1/4" hex. Hd | - | X | |||
Gasoline tank drain plug 3/8" C sunk hd | - | X | |||
Gasoline tank to frame rear charnel bracket-. lower | (Not used on 1001) | X | |||
Gasoline tank to frame rear channel bracket upper | (Not used on 1001) | X | |||
Bolt 5/16-74 x 7/8" hex. hd. | - | X | |||
Lockwasher 5/16" std. | - | X | |||
Nut 5/16-74 plain SAB | - | X | |||
Gasoline tank to frame rear Inter, channel bracket lower | - | X | |||
Gasoline tank to frame rear Inter, channel bracket lower | (Not used on 1001) | X | |||
Gasoline tank to frame rear Inter, channel bracket upper | - | X | |||
Gasoline tank to frame rear Inter, channel bracket upper | (Not used on 1001) | X | |||
Bolt 5/16-'' 4 x 7/8" hex. hd. | - | X | |||
Lockwasher 5/16" std. | - | X | |||
Nut 5/16-24 plain hex. | - | X | |||
Gasoline tank to frame junction tube | - | X | |||
Gasoline tank to frame junction tube assembly | (Not used on 1001) | X | |||
Gasoline tank to frame junction tube assembly | (Used on 1001 only) (Prior to frame No. 372540) | X | |||
Gasoline tank to frame junction tube assembly | (Used on 1001) (After frame No. 372539) | X | |||
Union nut 5/16" flared tube | - | X | |||
Gasoline t>nk to frame liner | (Used on 1001 only) | X | |||
Gasoline tank gauge assembly | (Used on 1001 only) (Prior to frame No. 37'' 540) | X | |||
Gasoline tank gauge assembly | (Used on 1001 only) (After frame No. 372539) | X | |||
Gasoline tank gauge assembly | (Used on 1002-3-4 only) | X | |||
Gasoline tank gauge assembly | - | X | |||
Screw No. 10-32 x 1/2" fill hd | - | X | |||
Gasoline tank gauge gasket | - | X | |||
Gasoline tank gauge tube bushing | (Not used on 1001) | X | |||
Gasoline tank Inlet cover assembly | (Used on 1002-3-4 only) | X | |||
Gasoline tank Inlet cover assembly | (Not used or. 1002) | X | |||
Gasoline tank Inlet cover gasket | - | X | |||
Gasoline tank Inlet gasket | - | X | |||
Gasoline tank Inlet grommet | (Used on 1001 only) | X | |||
Motor carburetor assembly | - | X | |||
Gasoline tank Inlet to lamp bracket screw No. 1-1/8" | - | X | |||
Motor carburetor assembly | - | X | |||
Lockwasher 3/16" | - | X | |||
Motor carburetor assembly | - | X | |||
Gasoline tank Inlet tube | - | X | |||
Motor carburetor assembly | - | X | |||
Rivet | - | X | |||
Motor carburetor automatic choke assembly | - | X | |||
Gasoline tank Inlet tube flange screw 1/4-78 x 5/8" hex. hd | - | X | |||
Screw 1/4-28 x 1-1/16" hex. hd | - | X | |||
Lockwasher 1/4" | - | X | |||
Washer 1/4" "N" std | - | X | |||
Gasoline tank inlet tube flange to tank flange gasket | - | X | |||
Lockwasher 1/4" Sherardize | - | X | |||
Gasoline tank inlet tube flexible | - | X | |||
Motor carburetor automatic choke to carburetor connecting rod assembly | - | X | |||
Gasoline tank support bracket reinforcement front | (Not used on 1001) | X | |||
Motor carburetor automatic choke to carburetor connecting rod | - | X | |||
Gasoline tank support bracket reinforcement rear | (Not used on 1001) | X | |||
Motor carburetor automatic choke to carburetor connecting rod assembly | - | X | |||
Gasoline tank support bracket front | (Not used on 1001) | X | |||
Motor carburetor automatic choke to carburetor connecting rod | - | X | |||
Gasoline tank support bracket rear | (Not used on 1001) | X | |||
Nut No. 10-32 | - | X | |||
Rivet 1/8 x 1/2" rnd. hd. | - | X | |||
Lockwasher 3/16" | - | X | |||
Gasoline tank support bracket screw | (Not used on 1001) | X | |||
Cotter pin | - | X | |||
Nut 7/16-20 (Mot used on 1001) | - | X | |||
Motor carburetor automatic choke to manifold gasket 1 -I | - | X | |||
Lock wire 5" long | (Not used on 1001) | X | |||
Motor carburetor automatic choke thermostat | - | X | |||
Gasoline tank support liner | (Used on 1001 only) | X | |||
Screw No. 8-32x3/8 oval head | - | X | |||
Gasoline tank support strap and stud assembly | (Used on 1001 only) | X | |||
Motor carburetor float chamber baffle | - | X | |||
Rivet 3/16 x 1/8" rnd. hd. | (Used on 1001 only) | X | |||
Motor carburetor gasket equipment | - | X | |||
Gasoline tank support strap stud nut | - | X | |||
Motor carburetor gasket equipment | - | X | |||
Gasoline tank support strap clamp | - | X | |||
Motor carburetor gasket | - | X | |||
Rivet | (Used on 1001 only) | X | |||
Motor carburetor gasket | - | X | |||
Gasoline tank support strap to frame bolt | (Used on 1001 only) | X | |||
Motor carburetor heat deflector | - | X | |||
Cotter pin 3/32 x 5/8" | (Used on 1001 only) | X | |||
Motor carburetor Insulator | - | X | |||
Nut 3/8-84 Castle | (Used on 1001 only) | X | |||
Motor carburetor Insulator | - | X | |||
Gasoline tank vent assembly | - | X | |||
Motor carburetor silencer and air cleaner assembly | - | X | |||
Gasoline tank vent tube assembly (100i only) | - | X | |||
Motor carburetor silencer and air cleaner assembly | - | X | |||
Gasoline tube outer assembly | (Used on 1100) (Supersedes 215026) | X | |||
Motor carburetor silencer and air cleaner assembly | - | X | |||
Gasoline tube outer assembly | (Used on 1102) (Supersedes 215025) | X | |||
Motor carburetor silencer and air cleaner support | - | X | |||
Gasoline tube outer assembly | (Used on 1105) (Supersedes 215024) | X | |||
Motor carburetor silencer and air cleaner support | - | X | |||
Gasoline tube outer assembly | (Used on 1003-1103) (Supersedes 209350) | X | |||
Motor carburetor silencer and air cleaner support | - | X | |||
Gasoline tube outer assembly | (Used on 1002-1101) (Supersedes 209696) | X | |||
Stud 1/4" | - | X | |||
Gasoline tube outer assembly | (Used on 1001 only) | X | |||
Lockwasher 1/4" | - | X | |||
Gasoline tube outer assembly | (Used on 1004-1104) (Supersedes 209349) | X | |||
Stud 5/16" special H.M | - | X | |||
Nut 5/16" flared tube inverted (Weatherhead) | - | X | |||
Lockwasher 5/16" std | - | X | |||
Clip | - | X | |||
Nut 5/16-24 plain | - | X | |||
Clip | (Used* on 1102) | X | |||
Nut 1/4-28 | - | X | |||
Clip | (Used on 1103) | X | |||
Motor carburetor stud 5/16 x 1-7/8" H.M. special | - | X | |||
Screw No. 10-32 x 5/8" fill, hd | - | X | |||
Lockwasher 5/16" | - | X | |||
Nut No. 10-32 | - | X | |||
Lockwasher No. 10 | - | X | |||
Washer No. 10 | - | X | |||
Screw No. 10-32 x 5/8" fill, hd | - | X | |||
Washer 3/16" std | - | X | |||
Lockwasher No. 10 std | - | X | |||
Gasoline tank assembly | COMMERCIAL CHASSIS | X | |||
Nut No. 10-32 SAE std | - | X | |||
Gasoline tank to frame rear channel bracket | COMMERCIAL CHASSIS | X | |||
Clip boltless 5/16" tube (single) (5 required on 1001 and 1 required on 1002) | - | X | |||
Gasoline tank to frame rear channel bracket lower | COMMERCIAL CHASSIS | X | |||
Gasoline tube outer to frame shield | - | X | |||
Gasoline tank gauge assembly | COMMERCIAL CHASSIS | X | |||
Screw | - | X | |||
Gasoline tank inlet tube | COMMERCIAL CHASSIS | X | |||
Gasoline tube frame Junction | - | X | |||
Gasoline tank inlet tube to wheel compartment bottom grommet | COMMERCIAL CHASSIS | X | |||
Lockwasher 11/16" Shakeproof | - | X | |||
Gasoline tube assembly | COMMERCIAL CHASSIS | X | |||
Nut 11/16-16 | - | X | |||
Gasoline tube assembly | COMMERCIAL CHASSIS | X | |||
Gasoline tube to frame junction retainer GASOLINE | - | X | |||
Gasoline fuel pump inlet tube assembly (Supersedes 225365) | - | X | |||
Gasoline tank assembly | (Use with bodies 803-12-13-14- 15-43-52-53-54-55-801-11-41-51-810-50-L194-L195- 903-12-13-14-15-43-52-53-54-55-901-11-41-51-910-50- L294-L295) | X | |||
Gasoline tank assembly | (Use with bodies 816-17-18-56- 57-58-807-19-47-59-63-83-916-17-18-56-57-58-907 --- 19-47-59-63-83) | X | |||
Gasoline tank connection-front | - | X | |||
Drain plug 3/8" hex. hd | - | X | |||
Gasoline tank to frame bracket rear left | (Use with bodies 803-12-13-14-15-43-52-53-54-55-L194-L195- 903-12-13-14-15-43-52-53-54-55-L294-L295) | X | |||
Gasoline tank to frame bracket rear right | (Use with bodies 803-12-13-14-15-84Z-52-53-54-5S-L194-L195- 903-12-13-14-15-43-52-53-54-55-L294-L295) | X | |||
Gasoline tank to frame bracket rear right | (Use with bodies 801-11-41-51-10-50-901-11-41-51-10-50) | X | |||
Gasoline tank to frame bracket rear left | (Use with bodies 801-11-41-51-10-50-901-11-41-51-10-50) | X | |||
Screw 5/16-24 x 11/16" hex. hd. | (Use with bodies 803-12-13-14-15-43-52-53-54-55-801-11- 41-51-10-50-L194-L195-903-12-13-14-15-43-52- 53-54-55-901-11-41-51-10-50-L294-L295) | X | |||
Motor fuel pump assembly | - | X | |||
Lockwasher 5/16" | (Use with bodies 803-12-13-14- 15-43-52-53-54-55-801-11-41-51-10-50-L194-L195- 903-12-13-14-15-43-52-53-54-55-901-11-41-51-10- 50-L294-L295) | X | |||
Motor fuel pump assembly | - | X | |||
Nut 5/16-24 | (Use with bodies 803-12-13-14-15-43- 52-53-54-55-801-11-41-51-10-50-L194-L195-903- 12-13-14-15-43-52-53-54-55-901-11-41-51-10-50- L294-L295) | X | |||
Motor fuel pump bushing | - | X | |||
Gasoline tank to frame rear channel bracket upper | (Use with bodies 816-17-18-856-57-58-807-19-863-47- 59-83-916-17-18-56-57-58-907-19-963-47-59-83) | X | |||
Motor fuel pump to carburetor tube assembly | - | X | |||
Gasoline tank to frame rear channel bracket lower | (Use with bodies 816-17-18-856-57-58-807-19-63-47- 59-83-916-17-18-56-57-58-907-19-963-47-59-83) | X | |||
Motor fuel pump to carburetor tube assembly | - | X | |||
Screw 5/16-24 x 11/16" hex. hd. | (Use with bodies 816-17-18-856-57-58-807-19-63-47-59-83-916-17- 18-56-57-58-907-19-963-47-59-83) | X | |||
Union nut 5/16" flared tube | - | X | |||
Lockwasher 5/16" | (Use with bodies 816-17-18-856- 57-807-19-63-47-59-83-858-916-17-18-56-57-58- 907-19-963-47-59-83) | X | |||
Union connection | - | X | |||
Nut 5/16-24 | (Use with bodies 816-17-18-56-57-58- 807-19-863-47-59-83-916-17-18-56-57-58-907-19- 963-47-59-83) | X | |||
Motor fuel pump to carburetor tube clip (To cylinder) | - | X | |||
Gasoline tank to frame rear intermediate channel bracket upper | (Not used with bodies 801-11-21-31- 41-51-801-50-901-11-21-31-41-51-910-50) | X | |||
Motor fuel pump to carburetor tube clip screw washer. | - | X | |||
Gasoline tank to frame rear intermediate channel bracket lower | (Not used with bodies 801-11-21-31- 41-51-10-50-901-11-21-31-41-51-10-50) | X | |||
Motor fuel pump to carburetor tube Insulator | - | X | |||
Gasoline tank to frame rear intermediate channel bracket upper | (Use with bodies 801-10-11-41-50-51- 901-10-11-41-50-51) | X | |||
Motor fuel pump to carburetor tube Insulator | - | X | |||
Gasoline tank to frame rear intermediate channel bracket lower | (Use with bodies 801-10-11-41-50-51- 901-10-11-41-50-51) | X | |||
Motor fuel pump gasket | - | X | |||
Bolt 5/16-24 x 7/8" hex. hd | - | X | |||
Motor fuel pump Insulating Washer H H H -<< | - | X | |||
Lockwasher 5/16" | - | X | |||
Motor fuel pump Insulator | - | X | |||
Nut 5/16-24 | - | X | |||
Motor fuel | - | X | |||
Gasoline tank gauge assembly | (Use with bodies 803-12- 13-14-15-43-52-53-54-55-801-11-41-51-10-50-L194- L195-903-12-13-14-15-43-52-53-54-55-901-11-41-51- 10-50-L294-L295) | X | |||
Motor fuel pump operating plunger assembly pump operating plunger assembly | - | X | |||
Gasoline tank gauge assembly | (Use with bodies 816- 17-18-56-57-58-807-19-63-47-59-33-916-17-18-56-57- 58-907-19-63-47-59-83) | X | |||
Motor fuel pump outlet connection (Union 5/16 flared tube) | - | X | |||
Screw No. 10-32 x 1/2" fill, hd | - | X | |||
Gasoline tank gauge binding post nut | - | X | |||
Lockwasher No. 10 Shakeproof | - | X | |||
Gasoline tank gauge gasket | - | X | |||
Gasoline tank Inlet cover assembly (Supersedes 190845-228814) | - | X | |||
Gasoline tank inlet cover gasket (Supersedes 190847). | - | X | |||
Gasoline tank inlet to fender screw | - | X | |||
Lockwasher No. 10 | - | X | |||
Gasoline tank Inlet flange gasket | (Use with bodies 801-3-11-12-13-14-15-41-43-51-52-53-54-55-810-50- L194-L195-901-3-11-12-13-14-15-41-43-51-52-53-54- 55-810-50-L294-L295) | X | |||
Gasoline tank Inlet tube assembly | (Use with bodies 803-12-13-14-15-43-52-53-54-55-L194-L195-903-12-13- 14-15-43-52-S3-54-55-L294-L295) (Supersedes 225809) I I | X | |||
Gasoline tank Inlet tube assembly | (Use with bodies 810-50-801-11-41-51-910-50-901-11-41-51) (Supersedes225809) | X | |||
Gasoline tank inlet tube assembly | (Use with bodies 816-17-18-56-57-58-807-19-63-47-59-83-916-17-18-56- 57-58-907-19-63-47-59-83) (Supersedes225532) | X | |||
Gasoline tank inlet tube elbow gasket | (Use with bodies 816-17-18-56-57-58-807-19-63-47-59-83-916- 17-18-56-57-58-907-19-63-47-59-83) | X | |||
Gasoline tank Inlet tube flange screw 1/4-28 x 5/8" hex. hd | - | X | |||
Lockwasher 1/4" | - | X | |||
Gasoline tank inlet tube flange gasket | - | X | |||
Gasoline tank inlet tube to wheel compartment bottom grommet | (Use with bodies 816-17-18-856-57-58-807- 19-63-47-59-83-916-17-18-56-57-58-907-19-63-47- 59-83) | X | |||
Screw No. 6 x 1/2" Parker Kalon | (Use with bodies 816-17-18-856-57-58-807-19-63-47-59-83-916-17- 18-56-57-58-907-19-63-47-59-83) (Supersedes 220715) | X | |||
Washer plain | (Use with bodies 816-17-18-56-57-58- 807-19-63-47-59-85-916-17-18-56-57-58-907-19- 63-47-59-83) | X | |||
Gasoline tank inlet tube to wheel compartment bottom grommet retainer-inner | (Use with bodies 816-17-18- 56-57-58-807-19-63-47-59-83-916-17-18-56-57-58- 907-19-63-47-59-83) | X | |||
Gasoline tank inlet tube to wheel compartment bottom grommet retainer-outer | (Use with bodies 816-17-18- 56-57-58-807-19-63-47-59-83-916-17-16-56-57-58- 907-19-63-47-59-83) | X | |||
Gasoline tank inlet tube to wheel housing grommet | - | X | |||
Gasoline tank inlet tube to wheel housing grommet screw No. 6 x 1/2" Parker Kalon | - | X | |||
Washer plain | - | X | |||
Gasoline tank support bracket | (Use with bodies 816- 17-18-56-57-58-807-19-63-47-59-83-916-17-18-56- 57-58-907-19-63-47-59-83) | X | |||
Gasoline tank support bracket front | (Use with bodies 803-12-13-14-15-43-52-53-54-55-801-11-41-51-903-12- 13-14-15-943-52-53-54-55-901-11-41-51) | X | |||
Rivet 1/8 x 1/2" | (Use with bodies 603-12-13-14- 15-43-52-53-54-55-801-11-41-51-903-12-13-14- 15-943-52-53-54-55-901-11-41-51-910-50-L294- L295 | X | |||
Rivet 1/8 x 1/2" | (Use with bodies 816-17-18-56- 57-58-807-19-63-47-59-83-916-17-18-56-57-58- 907-19-63-47-59-83) | X | |||
Gasoline tank support bracket rear | (Use with bodies 803-12-13-14-15-843-52-53-54-55-801-11-41-51-903- 12-13-14-15-943-52-53-54-55-901-11-41-51-910-50- L294-L295) | X | |||
Rivet 1/8 x 1/2" | (Use with bodies 803-12-13-14- 15-43-52-53-54-55-801-11-41-51-903-12-13-14-15- 943-52-53-54-55-901-11-41-51-910-50-L294-L295). | X | |||
Gasoline tank support bracket screw | - | X | |||
Washer 7/16" special | - | X | |||
Screw 7/16-20 x 7/8 hex. hd | - | X | |||
Lockwasher 7/16 Shakeproof | - | X | |||
Nut 7/16-20 | - | X | |||
Lock wire 5" long | - | X | |||
Gasoline tube assembly | (Used on 1200-1400) | X | |||
Gasoline tube assembly | (Used with bodies 801-11-12- 13-901-11-12-13) | X | |||
Gasoline tube assembly | (Used with bodies 814-15-914- 15-910) | X | |||
Gasoline tube assembly | (Used on 1203-1403) | X | |||
Gasoline tube assembly | (Used with bodies 841-51-52- 53-941-51-52-53-L294) | X | |||
Gasoline tube assembly | (Used with bodies 854-55-954- 955-950-L295) | X | |||
Gasoline tube assembly | (Use with bodies 807-16-17- 18-19-907-16-17-18-19) | X | |||
Gasoline tube assembly | (Use with body 863-963) | X | |||
Gasoline tube assembly | (Use on bodies 847-56-57-58- 59-947-56-57-58-59) | X | |||
Gasoline tube assembly | (Use with body 883-983) | X | |||
Gasoline tube assembly clip | - | X | |||
Gasoline tube assembly clip | - | X | |||
Screw No. 10-32 x 5/8" fill, hd | - | X | |||
Washer 3/16" | - | X | |||
Lockwasher No. 10 | - | X | |||
Nut No. 10-32 | - | X | |||
Gasoline tube clip boltless | - | X | |||
Gasoline tube assembly union nut 5/16" flared tube | - | X | |||
Accelerator pedal | (Used on 1002-3-4 only) | X | |||
Gasoline tube to frame shield | - | X | |||
Accelerator pedal | (Used on 1001 only) | X | |||
Screw No. 10-32 x 5/8" fill, hd | - | X | |||
Accelerator pedal | - | X | |||
Screw No. 14 x 5/8" binding hd. Parker Kalon | - | X | |||
Accelerator pedal bracket | - | X | |||
Washer 3/16" special | - | X | |||
Lockwasher 3/8" std | - | X | |||
Lockwasher No. 10 | - | X | |||
Nut 3/8-24 blind | - | X | |||
Nut No. 10-32 | - | X | |||
Washer 3/8" plain | - | X | |||
Gasoline tube Insulator | (Use with bodies 803-43-801- 11-12-13-14-15-41-51-52-53-54-55-903-43-901-11-12- 13-14-15-41-51-52-53-54-55) | X | |||
Lockwasher 7/16" shakeproof | - | X | |||
Gasoline tube insulator | (Use with bodies 807-16-17- 18-19-63-47-83-56-57-58-59-907-16-17-18-19-63-47- 83-56-57-58-59-950-10-L294-L295 | X | |||
Taper pin No. 0 x 3/4" | - | X | |||
Accelerator pedal hole cover | (Not used on 1001) | X | |||
Screw 1/4-28 x 1-3/8 hex. hd. | (Not used on 1001) | X | |||
Lockwasher 1/4" std. | (Not used on 1001) | X | |||
Accelerator pedal Insulating sleeve | - | X | |||
Insulating Washer | - | X | |||
Accelerator pedal retracting spring | - | X | |||
Accelerator pedal shaft assembly | (Used on 1001 only) (Not used with clutch control) | X | |||
Accelerator pedal shaft assembly | (Used on 1001 only) (Used with clutch control) | X | |||
Accelerator pedal shaft assembly | (Not used with clutch control) (Not used on 1001) | X | |||
Accelerator pedal shaft assembly | (Used on 1002-3-4) (Used with clutch control) | X | |||
Accelerator pedal shaft assembly | - | X | |||
Accelerator pedal shaft | - | X | |||
Accelerator pedal shaft spring | - | X | |||
Washer 7/16" plain "Y" std | - | X | |||
Accelerator pedal shaft bracket-right | - | X | |||
Accelerator pedal shaft bracket-left | (Not used on 1001) | X | |||
Accelerator pedal shaft bracket-left | - | X | |||
Screw 1/4-28 x 7/8" hex. hd. | (Used on 1001 only) | X | |||
Screw 1/4-28 x 1/8" hex. hd. | (Not used on 1001) . | X | |||
Screw 1/4-28 x 3/4 hex. hd | - | X | |||
Lockwasher 1/4" std | - | X | |||
Accelerator pedal shaft lever short | - | X | |||
Taper pin No. 0 x 3/4" | - | X | |||
Accelerator pedal shaft lever-upper | (Use with clutch control) | X | |||
Accelerator pedal shaft lever-lower connecting line | (Use with clutch control) | X | |||
Yoke end pin 1/4" | (Use with clutch control) | X | |||
Spring washer 1/4" | (Use with clutch control) | X | |||
Cotter pin 1/16 x 1/2" | (Use with clutch control). | X | |||
Accelerator pedal shaft lever to carburetor throttle valve conn, rod assembly | (Not used with clutch control) | X | |||
Accelerator pedal shaft lever to carburetor throttle valve conn, rod assembly | (Use with clutch control) | X | |||
Accelerator pedal shaft lever to carburetor throttle valve conn, rod assembly | (Not used with clutch control) | X | |||
Accelerator pedal shaft lever to carburetor throttle valve conn. rod assembly | (Use with clutch control). | X | |||
Accelerator pedal shaft lever to carburetor throttle valve conn, rod assembly | - | X | |||
Accelerator pedal shaft lever to carburetor throttle 1002 1004 1101 1104 1201 1204 1401 1404 valve conn, rod assembly | - | X | |||
Ball joint | (Not used with clutch control) | X | |||
Ball joint | (Used with clutch control) | X | |||
Nut No. 10-32 (L.H. thd.) | (Used with clutch control) | X | |||
Nut No. 10-32 | - | X | |||
Yoke end pin | - | X | |||
Cotter pin | - | X | |||
Lockwasher 3/16" | - | X | |||
Accelerator pedal shaft lever to carburetor throttle valve conn, rod retracting spring | (Use with clutch control) | X | |||
Accelerator pedal shaft lever to carburetor throttle valve conn, rod retracting spring clip | (Use with clutch control) | X | |||
Clamp screw No. 10-32 x 3/8" rnd. hd. | (Use with clutch control) | X | |||
Nut No, 10-32 | (Use with clutch control) | X | |||
1932-1937 Twelve | |||||
| Group Number | Group Name | Part Number | Application | Note | QTY |
Throttle valve body | - | X | |||
9 Screen | - | X | |||
Fast idle bell crank lever | - | X | |||
5 Cowl seat | - | X | |||
Fast idle bell crank lever bushing N0TE:-When ordering venturi tubes, high speed bleeders metering jets, pump discharge. Jets, or by-pass Jets specify the size number which is found stamped on each part, and always state type of carburetor and serial number as well as model and make of car for which part Is Intended | - | X | |||
3 Ball nut | - | X | |||
Float chamber vent cap attaching screw | - | X | |||
6 Bail and screw | - | X | |||
Choke valve (Comp.) | - | X | |||
1 Valve plug | - | X | |||
Choke valve screws | - | X | |||
2 Valve plug gasket | - | X | |||
Air horn attaching screw | - | X | |||
Valve spring | - | X | |||
Air horn attaching screw lockwasher | - | X | |||
Valve | - | X | |||
Air horn attaching screw | - | X | |||
Air dome | - | X | |||
Air horn attaching stud | - | X | |||
Combination pump | - | X | |||
Air horn attaching stud nut | - | X | |||
Air dome | - | X | |||
Air horn attaching stud nut lockwasher | - | X | |||
Body | - | X | |||
Air horn gasket | - | X | |||
Top cover and valve seat assembly | - | X | |||
Economizer by-pass jet | - | X | |||
Rocker arm | - | X | |||
Float chamber cover screws | - | X | |||
Rocker arm pin | - | X | |||
Float chamber cover screws lockwasher | - | X | |||
Rocker arm washer | - | X | |||
Float fulcrum screw | - | X | |||
Oil seal gasket | - | X | |||
Float fulcrum screw gasket | - | X | |||
Oil seal gasket retainer | - | X | |||
Float needle valve | - | X | |||
Top cover screw | - | X | |||
Float needle valve seat | - | X | |||
Top cover screw lockwasher 906 1006 1108 1208 1408 | - | X | |||
Float needle valve seat gasket | - | X | |||
Link | - | X | |||
Float with lever (Comp.) | - | X | |||
Valve plug | - | X | |||
Float hanger | - | X | |||
Valve | - | X | |||
Fast idle rod | - | X | |||
Valve spring | - | X | |||
Fast idle rod cotter pin | - | X | |||
Glass bowl | - | X | |||
Fast idle adj. lever | - | X | |||
Bowl gasket | - | X | |||
Gasoline fuel pump Inlet hose assembly | - | X | |||
Fast idle adj. lever screw | - | X | |||
Screen | - | X | |||
Gasoline tank assembly | - | X | |||
Fast idle adj. lever screw locknut | - | X | |||
9 Ball assembly | - | X | |||
Gasoline tank assembly | - | X | |||
Fast idle adj. lever stem nut | - | X | |||
7 Bowl seat | - | X | |||
Gasoline tank assembly | - | X | |||
Motor carburetor assembly | - | X | |||
Fast idle adj. lever stem nut lockwasher | - | X | |||
8 Thumb nut | - | X | |||
Gasoline tank drain plug 1/4" hex. M | - | X | |||
Motor carburetor assembly | - | X | |||
Fast Idle adj. lever | - | X | |||
Diaphragm (5 pieces 855275) | - | X | |||
Gasoline tank drain plug 3/8" countersunk hd | - | X | |||
Motor carburetor assembly | - | X | |||
Fast idle adj. lever fulcrum screw | - | X | |||
9 Pull rod | - | X | |||
Gasoline tank drain plug 3/8" hex. hd | - | X | |||
Motor carburetor gasket equipment | - | X | |||
Fast idle adj. lever fulcrum screw washer | - | X | |||
9 Pull rod nut | - | X | |||
Gasoline tank to frame rear channel bracket lower | - | X | |||
Motor carburetor gasket | - | X | |||
Idle air bleed | - | X | |||
Upper diaphragm protector | - | X | |||
Gasoline tank to frame rear channel bracket lower | - | X | |||
Motor carburetor front chamber baffle | - | X | |||
Idle air bleed channel plug | - | X | |||
0 Lower diaphragm protector | - | X | |||
Gasoline tank to frame rear channel bracket lower | - | X | |||
Motor carburetor retaining stud | - | X | |||
Idle channel screw plug | - | X | |||
Diaphragm alignment washer | - | X | |||
Gasoline tank to frame rear channel bracket upper | - | X | |||
Nut 3/8-24 | - | X | |||
Idle channel screw plug | - | X | |||
Pull rod lockwasher | - | X | |||
Gasoline tank to frame rear channel bracket upper | - | X | |||
Motor carburetor retracting spring | - | X | |||
Idle needle valve | - | X | |||
Pull rod gasket | - | X | |||
Gasoline tank to frame rear charnel bracket upper | - | X | |||
Motor carburetor silencer assembly | - | X | |||
Idle needle valve spring | - | X | |||
7 Rocker arm spring | - | X | |||
Bolt 5/16-24 x 7/8" hex. hd | - | X | |||
Motor carburetor silencer gasket MOTOR CARBURETOR AUTOMATIC CHOKE | - | X | |||
Idle tube | - | X | |||
1 Diaphragm spring | - | X | |||
Bolt 5/16-24 x 1-1/8" hex. hd | - | X | |||
Motor carburetor automatic choke assembly | - | X | |||
Main body | - | X | |||
0 Body | - | X | |||
Lockwasher 5/16" | - | X | |||
Motor carburetor automatic choke assembly | - | X | |||
Main body attaching screws | - | X | |||
Body screw | - | X | |||
Nut 5/16-24 plain | - | X | |||
Motor carburetor automatic choke to carburetor conn rod assembly | - | X | |||
Main body attaching screw lockwashers | - | X | |||
Body screw lockwasher | - | X | |||
Gasoline tank to frame rear intermediate channel bracket lower | - | X | |||
Motor carburetor automatic choke to carburetor throttle lever control rod ball Joint nut | - | X | |||
Main body gasket | - | X | |||
Diaphragm (5 pieces 856218) | - | X | |||
Gasoline tank to frame rear Intermediate channel bracket lower | - | X | |||
Motor carburetor automatic choke to manifold gasket r | - | X | |||
Main discharge Jet | - | X | |||
Diaphragm spring | - | X | |||
Gasoline tank to frame rear Intermediate channel bracket lower | - | X | |||
Motor carburetor automatic choke to carburetor throttle lever control rod assembly | - | X | |||
Main discharge Jet plug | - | X | |||
Upper diaphragm protector | - | X | |||
Gasoline tank to frame rear intermediate channel bracket to upper | - | X | |||
Ball joint | - | X | |||
Main discharge Jet plug gasket | - | X | |||
Lower diaphragm protector | - | X | |||
Gasoline tank to frame rear Intermediate channel bracket to upper | - | X | |||
Motor carburetor automatic choke to carburetor choke rod assembly | - | X | |||
Main metering jet | - | X | |||
6 Diaphragm alignment washer | - | X | |||
Accelerator pedal | - | X | |||
Gasoline tank to frame rear intermediate channel bracket \ to upper | - | X | |||
Air horn (comp.) | - | X | |||
Pump check valve (Comp.) | - | X | |||
7 Gasket | - | X | |||
Accelerator pedal | - | X | |||
Bolt 5/16-24 x 7/8" hex- hd | - | X | |||
9 Air horn | - | X | |||
Pump check valve channel plug | - | X | |||
1 Pull rod | - | X | |||
Accelerator pedal bracket | - | X | |||
Bolt 5/16-24 x 1-1/8" hex. hd | - | X | |||
3L Choke lever (comp.) | - | X | |||
Pump discharge nozzle | - | X | |||
9 Pull rod nut | - | X | |||
Lockwasher 3/8n | - | X | |||
Lockwasher 5/16" | - | X | |||
Clamp screw | - | X | |||
Pump discharge nozzle channel plug | - | X | |||
Pull rod nut lockwasher | - | X | |||
Nut 3/8" | - | X | |||
Nut 5/16-24 plain hex | - | X | |||
7L Choke lever stem | - | X | |||
Pump discharge nozzle channel plug (external | - | X | |||
Pull rod gasket | - | X | |||
Nut 3/8-24 blind | - | X | |||
Gasoline tank to frame rear channel bracket spacer | - | X | |||
1L Choke lever stem collar | - | X | |||
Pump lever (Comp.) | - | X | |||
Bottom cover | - | X | |||
Washer 3/8" plain | - | X | |||
Gasoline tank to frame rear intermediate channel bracket spacer | - | X | |||
L Choke lever stem collar | - | X | |||
Pump lever stop screw | - | X | |||
Bottom cover screw | - | X | |||
Lockwasher 7/16" | - | X | |||
Gasoline tank to frame Junction tube assembly | - | X | |||
Choke lever stem collar set screw | - | X | |||
Pump lever spring | - | X | |||
Bottom cover gasket | - | X | |||
Taper pin No. 0 x 3/4" | - | X | |||
Gasoline tank to frame Junction tube assembly | - | X | |||
Choke valve (comp.) | - | X | |||
Pump lever fulcrum screw | - | X | |||
Valve | - | X | |||
Accelerator pedal insulating sleeve | - | X | |||
Union nut 5/16" flared tube | - | X | |||
Choke valve screw | - | X | |||
Pump lever fulcrum screw spring washer | - | X | |||
Valve stop plate | - | X | |||
Insulating washer | - | X | |||
Union nut 3/8" flared tube | - | X | |||
Float chamber cover plug | - | X | |||
Pump lever fulcrum screw lock screw | - | X | |||
Valve spring | - | X | |||
Gasoline tank assembly | (Use with body 275) | X | |||
Accelerator pedal hole cover | - | X | |||
Nut 3/8" flared tube inverted | - | X | |||
Clamp screw | - | X | |||
Pump lever fulcrum screw lock screw washer | - | X | |||
Valve retainer | - | X | |||
Gasoline tank assembly | (Use with body 3188) | X | |||
Screw 1/4-28 x 1-3/8" hex. hd | - | X | |||
Gasoline tank to motor carburetor frame Junction | - | X | |||
Air horn attaching screw | - | X | |||
Pump piston and link (Comp.) | - | X | |||
Valve retainer gasket | - | X | |||
Gasoline tank to frame rear channel bracket spacer | (Use with body 275) | X | |||
Lockwasher 1/4" | - | X | |||
Lockwasher 11/16" | - | X | |||
Air horn attaching screw | - | X | |||
Pump piston spring | - | X | |||
Screen | - | X | |||
Gasoline tank to frame rear Intermediate channel bracket-lower | (Use with body 275) | X | |||
Accelerator pedal retracting spring | - | X | |||
Nut 11/16-16 | - | X | |||
Air horn attaching screw lockwasher | - | X | |||
Pump and link | - | X | |||
Valve retainer screw | - | X | |||
Gasoline tank to frame rear intermediate channel bracket-upper | (Use with body 275) | X | |||
Accelerator pedal shaft | - | X | |||
Union nut flared tube | - | X | |||
Air horn gasket | - | X | |||
Pump and link | - | X | |||
7 Link MOTOR GEAR COVER | - | X | |||
Gasoline tank to frame rear channel bracket- lower | (Use with body 275) | X | |||
Accelerator pedal shaft assembly | (Not used with clutch control) | X | |||
Gasoline tank gauge assembly | - | X | |||
Air horn attaching stud | - | X | |||
Pump and#l' tnjt spring washer | - | X | |||
Gasoline tank to frame rear channel bracket- upper | (Use with body 275) | X | |||
Accelerator pedal shaft assembly | (Used only with clutch control) | X | |||
Gasoline tank gauge assembly (After frame No. 901200) | - | X | |||
Air horn attaching stud | - | X | |||
Pump and link- felt washer | - | X | |||
Gasoline tank to frame rear Intermediate channel bracket spacer | (Use with body 275) | X | |||
Accelerator pedal shaft assembly | - | X | |||
Gasoline tank gauge assembly (Prior to frame No. 901201) rl | - | X | |||
Air horn attaching stud nu t | - | X | |||
Pump platen jmtA link washer | - | X | |||
Gasoline tank Inlet bushing | (Use with body 275) | X | |||
Accelerator pedal shaft bracket-right | - | X | |||
Gasoline tank gauge assembly | - | X | |||
Air horn attaching stud nut | - | X | |||
Pump pist< | - | X | |||
Gasoline tank Inlet cap assembly-right | (Use with body 275) | X | |||
Accelerator pedal shaft bracket-left | - | X | |||
Screw No. 10-32 x 1/2" fill, head | - | X | |||
Air horn attaching stud lockwasher | - | X | |||
Pump rod | - | X | |||
Gasoline tank Inlet cap assembly-left | (Use with body 276) * For Items not listed herein see Instructions on Page 2 | X | |||
Accelerator pedal shaft bracket-left | - | X | |||
Gasket | - | X | |||
Boon, by pass jet (comp.) | - | X | |||
Pump rod cotter pin | - | X | |||
Gasoline tank Inlet cap assembly-right screw W -S #10-52 x 1-1/8" fll). hd. | (Use with body 875) | X | |||
Screw 1/4-28 x 3/4" hex. hd | - | X | |||
Gasoline tank gauge tube bushing | - | X | |||
Float needle valve | - | X | |||
Pump rod washer | - | X | |||
Lockwasher #10 | (Use with body 275) | X | |||
Screw 1/4-88 x 1-1/8" hex. hd | - | X | |||
Gasoline tank Inlet cover assembly | - | X | |||
Float needle valve seat | - | X | |||
Pump housing | - | X | |||
Gasoline tank inlet cap emblem | (Use with body 27B) | X | |||
Lockwasher 1/4" | - | X | |||
Gasoline tank inlet cover assembly | - | X | |||
Float needle valve seat gasket | - | X | |||
Pump housing attaching screw | - | X | |||
Gasoline tank inlet cap emblem retaining nut | (Use with body 275) | X | |||
Accelerator pedal shaft bracket retainer | - | X | |||
Gasoline tank inlet cover gasket | - | X | |||
Float with lever (comp.) | - | X | |||
Pump housing attaching screw lockwasher | - | X | |||
Gasoline tank Inlet cap locking plate assembly | (Use with body 275) | X | |||
Accelerator pedal shaft lever | - | X | |||
Gasoline tank Inlet gasket | - | X | |||
Float hanger | - | X | |||
Throttle lever and stem (Comp.) | - | X | |||
Screw #10-32 x 3/8" flat hd. | (Use with body 275) | X | |||
Accelerator pedal shaft lever | (Used only with clutch control) | X | |||
Gasoline tank Inlet to lamp bracket screw No. 10-32 i-i/a | - | X | |||
Float fulcrum screw | - | X | |||
Throttle stop | - | X | |||
Gasoline tank Inlet cap-right spacer | (Use with body 275) | X | |||
Accelerator pedal shaft lever | (Not used with clutch control) | X | |||
Lockwasher 3/16" | - | X | |||
Float fulcrum screw gasket | - | X | |||
Throttle stop | - | X | |||
Gasoline tank Inlet flange-right | (Use with body 275) | X | |||
Accelerator pedal shaft lever | - | X | |||
Gasoline tank inlet tube assembly | - | X | |||
Idle needle valve | - | X | |||
Throttle stop | - | X | |||
Gasoline tank Inlet flange-left | (Use with body 275) | X | |||
Taper pin No. 0 x 3/4" | - | X | |||
Rivet | - | X | |||
Idle needle valve spring | - | X | |||
Throttle valve | - | X | |||
Screw #10-32 x 11/32" fill. hd. | (Use with body 275) | X | |||
Accelerator pedal shaft lever free | - | X | |||
Gasoline tank inlet tube flange screw 1/4-28 x 5/8 hex, hd | - | X | |||
Idle tubes (comp.) | - | X | |||
Throttle valve screw | - | X | |||
Lockwasher #10 | (Use with body 275) | X | |||
Spring washer 7/16" (Supersedes 166436) | - | X | |||
Lockwasher 1/4 | - | X | |||
Idle air bleeders | - | X | |||
Throttle valve screw lockwasher | - | X | |||
Gasoline tank Inlet flange gasket | (Use with body 275) | X | |||
Washer 7/16" plain | - | X | |||
Gasoline tank Inlet screw bracket | - | X | |||
Idle air bleeders channel plugs | - | X | |||
Throttle valve | - | X | |||
Gasoline tank Inlet tube assembly | (Use with body 280) | X | |||
Accelerator pedal shaft lever conn, link (Prior to Frame No. 900450) | - | X | |||
Gasoline tank inlet tube flange to tank flange gasket | - | X | |||
Idle channel screw plug | - | X | |||
Fast idle bell crank lever | - | X | |||
Gasoline tank support bracket reinforcement-front | (Use with body 275) | X | |||
Accelerator pedal shaft lever conn, link (After Frame No. 900449) | - | X | |||
Gasoline tank inlet tube flexible coupling | - | X | |||
Idle channel drive plug | - | X | |||
Fast idle bell crank lever MOTOR CLUTCH SHAFT BEARING | - | X | |||
Gasoline tube outer assembly | - | X | |||
Yoke end pin 1/4" | - | X | |||
Gasoline tank support bracket front | - | X | |||
Main body | - | X | |||
Cotter pin 1/16 x 1/2" | - | X | |||
Gasoline tank support bracket front reinforcement | - | X | |||
Main body gasket | - | X | |||
Accelerator pedal shaft lever to carburetor throttle valve shaft conn, rod | - | X | |||
Gasoline tank support bracket front reinforcement | - | X | |||
Main body attaching screw | - | X | |||
Accelerator pedal shaft lever to carburetor throttle valve shaft conn, rod | (Not used with clutch control) | X | |||
Gasoline tank support bracket rear reinforcement | - | X | |||
Main body attaching screw lockwasher | - | X | |||
Accelerator pedal shaft lever to carburetor throttle valve shaft conn, rod | (Used with clutch control only) | X | |||
Rivet | - | X | |||
Main discharge Jets | - | X | |||
Accelerator pedal shaft lever to carburetor throttle valve conn, rod | - | X | |||
Gasoline tank support bracket rear reinforcement | - | X | |||
Main discharge Jets plug | - | X | |||
Ball Joint No. 10-32 R.H. thd. | (Not used with clutch control) | X | |||
Rivet | - | X | |||
Main discharge Jets plug gaskets | - | X | |||
Ball Joint (L.H. thd.) | - | X | |||
Gasoline tank support bracket screw | - | X | |||
Metering Jets | - | X | |||
Ball joint (R.H. thd.) | (Used with clutch control) | X | |||
Nut 7/16-20 plain SAE | - | X | |||
Pump check valve (comp.) | - | X | |||
Nut No. 10-32 (R.H. thd.) | - | X | |||
Lock wire (5" long) | - | X | |||
Pump check valve channel plug | - | X | |||
Nut No. 10-32 (L.H. thd.) | - | X | |||
Gasoline tube front assembly | (Used on 905 only) | X | |||
Pump piston and link (comp.) | - | X | |||
Lockwasher No. 10 | - | X | |||
Gasoline tube front assembly | (Used on 906 only) | X | |||
Spring | - | X | |||
Accelerator pedal shaft lever to carburetor throttle valve conn, rod retracting spring | - | X | |||
Union nut 5/16" flared tube | - | X | |||
Pump discharge nozzles | - | X | |||
Accelerator pedal shaft lever to carburetor throttle valve conn, rod retracting spring bracket | - | X | |||
Union nut 5/16" flared tube | - | X | |||
Pump lever (comp.) | - | X | |||
Accelerator pedal shaft spring | - | X | |||
Gasoline tube front clip | - | X | |||
Pump lever stop screw | - | X | |||
Washer 7/16" | - | X | |||
Gasoline tube front clip | - | X | |||
Pump lever fulcrum screw | - | X | |||
Screw No. 10-32 x 5/8" fill, hd | - | X | |||
Pump lever fulcrum screw washer | - | X | |||
Washer 3/16" plain | - | X | |||
Pump lever fulcrum screw spring washer | - | X | |||
Lockwasher- No. 10 | - | X | |||
Pump lever locking screw | - | X | |||
Nut No. 10-32 SAE | - | X | |||
Pump spring | - | X | |||
Gasoline tube frame to fuel pump assembly | - | X | |||
Pump splash washer | - | X | |||
Nut flared tube inverted (Weatherhead) | - | X | |||
Pump rod (comp.) | - | X | |||
- | - | X | |||
Pump rod washer | - | X | |||
Gasoline tube frame Junction | - | X | |||
Pump rod washer cotter pi n | - | X | |||
Lockwasher 7/8" (Shakeproof) | - | X | |||
Pump link washer | - | X | |||
Nut 7/8-14 | - | X | |||
Pump link washer cotter pin | - | X | |||
Nut 3/8" flared tube inverted (Weatherhead) ) | - | X | |||
Pump housing | - | X | |||
Gasoline tube outer assembly | (Used on 1005-1107) r (Supersedes 209360) | X | |||
Pump housing attaching screw | - | X | |||
Gasoline tube outer assembly | (Used on 1006-1108) (Supersedes 209361) | X | |||
Pump discharge nozzle plugs | - | X | |||
Clip | - | X | |||
Pump discharge nozzle plugs | - | X | |||
Clip | - | X | |||
Pump discharge channel plugs | - | X | |||
Screw No. 10-32 x 5/8" fill, hd | - | X | |||
Throttle valve body | - | X | |||
Washer 3/16" | - | X | |||
Throttle valve | - | X | |||
Lockwasher No. 10 | - | X | |||
Throttle valve screw | - | X | |||
Nut No. 10-32 | - | X | |||
Throttle valve screw lockwasher | - | X | |||
Clip boltless | - | X | |||
Throttle lever and stem (comp.) | - | X | |||
Nut 3/8 inverted | - | X | |||
Throttle stop screw | - | X | |||
Gasoline tube outer to frame shield | - | X | |||
Throttle stop spring | - | X | |||
Screw | - | X | |||
Adjusting screw | - | X | |||
Gasoline fuel pump Inlet tube assembly (Supersedes 225680) | - | X | |||
Adjusting screw spring | - | X | |||
Gasoline tank assembly | (Used with bodies 832-33-34-35- 821-31-30-L194-L195-932-33-34-35-21-31-30-L294-L295) . i-H | X | |||
Carburetor connecting rod (comp.) | - | X | |||
Gasoline tank assembly | (Use with bodies 827-36-37-38-39- rH 73-927-36-37-38-39-73) | X | |||
Carburetor connecting rod and connection | - | X | |||
Gasoline tank drain plug 3/8 hex. hd | - | X | |||
Carburetor connecting rod choke lever | - | X | |||
Gasoline tank to frame bracket rear left | (Use with bodies 832-33-34-35-L194-L195-932-33-34-35-L294-L295) | X | |||
Carburetor connecting rod choke lever clamp screw | - | X | |||
Gasoline tank to frame bracket rear right | (Use with bodies 833-34-35-632-L194-L195-932-33-34-35-L294-L295) | X | |||
Carburetor connecting rod choke lever clamp screw nut | - | X | |||
Screw 5/16-24 x 11/16 hex. hd. | (Use with bodies 832-33-34-35-821-31-30-L194-L195-932-33-34-35-21- <3) 31-30-L294-L295) | X | |||
Carburetor connecting rod ball joint | - | X | |||
Lockwasher 5/16 | (Use with bodies 832-33-34-36-821- 31-30-L194-L195-632-33-34-35-21-31-30-L294-L295) . CO | X | |||
Carburetor connecting rod ball joint nut | - | X | |||
Nut 5/16-24 | (Use with bodies 832-33-34-35-821-31-30- L194-L195-932-33-34-35-21-31-30-L294-L295) | X | |||
Carburetor connecting rod ball joint nut washer | - | X | |||
Gasoline tank to frame bracket rear right | (Use with bodies 830-21-31-930-21-31) | X | |||
Carburetor connecting rod ball joint lock nut | - | X | |||
Gasoline tank to frame bracket rear left | (Use with bodies 830-21-31-930-21-31) | X | |||
Check valve | - | X | |||
Gasoline tank to frame rear channel bracket upper | (Use on bodies 836-37-38-827-839-873-936-37-38-27-73-39) | X | |||
Check valve bushing | - | X | |||
Gasoline tank to frame rear channel bracket lower | (Use on bodies 836-37-38-827-839-73-936-37-38-27-39-73) | X | |||
Choke lever with stem (coop.) | - | X | |||
Screw 5/16-24 x 11/16 hex. hd. | (Use on bodies 836- tfr- 37-38-827-839-873-936-37-38-27-39-73) | X | |||
Choke link with levers (comp.) | - | X | |||
Lockwasher 5/16 | (Use on bodies 836-37-38-827-39-73- 936-37-38-27-39-73) | X | |||
Choke link lever screw | - | X | |||
Nut 5/16-24 | (Use with bodies 836-37-38-827-39-73- 936-37-38-27-39-73) | X | |||
Choke link lever set screw | - | X | |||
Gasoline tank to frame rear intermediate channel bracket upper | (Used on bodies 832-33-34-35-36-37-38-39-27-73- L194-L195-932-33-34-35-36-37-38-39-27-73-L294-L295) | X | |||
Flange gasket | - | X | |||
Gasoline tank to frame rear intermediate channel bracket lower | (Used on bodies 832-33-34-35-36-37-38-39-27-73- L194-L195-932-33-34-35-36-37-38-39-27-73-L294-L296) | X | |||
Kick lever with bushing | - | X | |||
Gasoline tank to frame rear intermediate channel bracket upper | (Use with bodies 830-21-31-921-31-30) | X | |||
Kick lever set screw | - | X | |||
Gasoline tank to frame rear intermediate channel bracket lower | (Use with bodies 830-21-31-921-31-30) | X | |||
Kick lever torsion spring | - | X | |||
Bolt 5/16-24 x 7/8 hex. hd | - | X | |||
Kick lever torsion spring pin | - | X | |||
Lockwasher- 5/16" | - | X | |||
Main body | - | X | |||
Nut 5/16-24 | - | X | |||
Main body cover | - | X | |||
Gasoline tank gauge assembly | (Use with bodies 832-33-34- 35-821-31-30-L194-LI95-932-33-34-35-21-31-30-L294- L295) | X | |||
Main body plate | - | X | |||
Gasoline tank gauge assembly | (Use with bodies 836-37-38- I I H rH 827-39-73-932-33-34-35-21-30-L294-L295) | X | |||
Main body plate attaching screw | - | X | |||
Screw No. 10-32 x 1/2" fill, hd | - | X | |||
Piston kick lever | - | X | |||
Binding post nut | - | X | |||
Piston stop pin | - | X | |||
Lockwasher No. 10 (Shakeproof) | - | X | |||
Piston spring | - | X | |||
Gasoline tank gauge gasket | - | X | |||
Piston washer | - | X | |||
Gasoline tank inlet cap assembly | - | X | |||
Piston with link (comp.) | - | X | |||
Gasoline tank inlet cover assembly (Supersedes 190845) | - | X | |||
Release lever with stem (comp.) | - | X | |||
Gasoline tank inlet cover gasket (Supersedes 190847) | - | X | |||
Release lever stem collar | - | X | |||
Gasoline tank inlet to fender screw | - | X | |||
Release lever stem collar set screw | - | X | |||
Lockwasher No. 10 | - | X | |||
Thermostat | - | X | |||
Gasoline tank Inlet flange gasket | (Use with.bodies 621- 831-32-33-34-35-830-L194-L195-921-31-32-33-34-35-L294- L295-930) | X | |||
Thermostat bracket | - | X | |||
Gasoline tank inlet tube assembly | (Use with bodies 836- 37-38-827-39-73-936-37-38-27-39-73) | X | |||
Thermostat bracket screw | - | X | |||
Gasoline tank Inlet tube assembly | (Use with bodies 832- 33-34-35-L194-L194-932-33-34-35-L294-L295) (Supersedes 823235) | X | |||
Thermostat housing | - | X | |||
Gasoline tank Inlet tube assembly | (Use with bodies 830- 21-31-930-21-31) (Supersedes 223235) | X | |||
Thermostat housing clamp with screw (comp.) | - | X | |||
Gasoline tank inlet tube elbow gasket | (Use with bodies B36-7-8-9-27-73-936-37-38-39-27-73) | X | |||
Clamp screw | - | X | |||
Gasoline tank inlet tube flange screw 1/4-28 x 5/8" hex. hd | - | X | |||
Clamp screw nut | - | X | |||
Lockwasher 1/4" | - | X | |||
Thermostat pointer | - | X | |||
Gasoline tank inlet tube flange gasket | - | X | |||
Thermostat stem | - | X | |||
Gasoline tank Inlet tube to wheel compartment bottom grommet | (Use with bodies 836-37-38-827-39-873-936-37- 38-27-39-73) | X | |||
Thermostat stem washer | - | X | |||
Screw No, 6 x 1/2 Parker Kalon | (Use with bodies 836- 1 CD CO 37-38-827-39-873-936-37-38-27-39-73) | X | |||
Air horn with valve (comp.) | - | X | |||
Washer-plain | (Use with bodies 836-37-38-827-39-873) 1 CD | X | |||
Air horn | - | X | |||
Gasoline tank inlet tube to wheel compartment bottom grommet retainer-inner | (Use with bodies 836-7-8-827-39- 73-936-37-38-39-27-73) | X | |||
Choke balance lever | - | X | |||
Gasoline tank inlet tube to wheel compartment bottom grommet retainer-outer | (Use with bodies 836-7-8-827-39- 73-936-37-38-927-39-73) | X | |||
Choke balance lever clamp screw | - | X | |||
Gasoline tank Inlet tube to wheel housing grommet | - | X | |||
Choke lever (comp.) | - | X | |||
Gasoline tank inlet tube to wheel housing grommet screw No. 6 x 1/2 Parker Kalon | - | X | |||
Choke lever clamp screw | - | X | |||
Washer-plain | - | X | |||
Choke lever clamp screw nut | - | X | |||
Gasoline tank support bracket | (Use with bodies 836-37-38- 827-39-873-956-37-38-27-39-73) | X | |||
Choke lever stem | - | X | |||
Gasoline tank support bracket front | (Use with bodies 832- 33-34-35-821-31-30-L194-LI95-932-33-34-35-21-31-30- L294-L295) | X | |||
Choke stem washer | - | X | |||
Rivet 1/8 x 1/2 | (Use with bodies 832-33-34-35-821-31- 30-L194-L195-932-33-34-35-21-30-L294-L295) | X | |||
Choke stem collar | - | X | |||
Rivet 1/8 x 1/2 | (Use with bodies 836-37-38-827-39-73- 02 02 936-37-38-27-39-73) | X | |||
Choke stem collar set screw | - | X | |||
Gasoline tank support bracket rear | (Use with bodies 332- 33-34-35-821-31-30-L194-L195-932-33-34-35-21-31-30- to L294-L295) | X | |||
Float chamber vent | - | X | |||
Rivet 1/8 x 1/2 | (Use with bodies 832-33-34-35-821-31- (7) 30-LI94-L195-932-33-34-35-B1-31-30-L294-L295) | X | |||
Float chamber vent cap | - | X | |||
Gasoline tank support bracket screw | - | X | |||
Float chamber vent cap attaching screw _ | - | X | |||
Washer 7/16" special | - | X | |||
Choke valve (comp.) | - | X | |||
Nut 7/16-20 | - | X | |||
Choke valve screws | - | X | |||
Lock wire 5" long | - | X | |||
Air horn attaching screw | - | X | |||
Gasoline tube assembly | (Use on 1207-1407) | X | |||
Air horn attaching screw lock-washer | - | X | |||
Gasoline tube assembly | (Use on 1208-1408) | X | |||
Air horn attaching screws | - | X | |||
Gasoline tube assembly clip | - | X | |||
Air horn attaching stud | - | X | |||
Gasoline tube assembly clip | - | X | |||
Air horn attaching stud nut | - | X | |||
Gasoline tube assembly clip | - | X | |||
Air horn attaching stud nut lockwasher | - | X | |||
Screw No. 10-32 x 3/4" fill, head | - | X | |||
Air horn gasket | - | X | |||
Washer 3/8" special | - | X | |||
Economizer by-pass jet | - | X | |||
Lockwasher No. 10 | - | X | |||
Float chamber cover screws | - | X | |||
Washer 5/16 | - | X | |||
Float chamber cover screws lockwasher | - | X | |||
Nut No. 10-32 | - | X | |||
Float fulcrum screw | - | X | |||
Gasoline tube assembly union nut 3/8 | - | X | |||
Float fulcrum screw gasket | - | X | |||
Gasoline tube connection-front | - | X | |||
Float needle valve | - | X | |||
Gasoline tube to frame shield | - | X | |||
Float needle valve seat | - | X | |||
Screw No. 14 x 5/8 binding head (Parker Kalon) | - | X | |||
Float needle valve seat gasket | - | X | |||
Gasoline tube insulator-front | - | X | |||
Float with lever (comp.) | - | X | |||
Gasoline tube Insulator-rear IGNITION COIL AND SWITCH (Electric Auto-Lite No. CE-4020) The following parts are listed with the manufacturers' piece numbers and are to be ordered by these numbers Dealers should order these parts through their distributor. << | - | X | |||
Float hanger | - | X | |||
Fast idle rod | - | X | |||
Fast idle rod cotter pin | - | X | |||
Fast idle adj. lever | - | X | |||
Fast idle adj . lever screw | - | X | |||
Fast idle adj. lever screw locknut | - | X | |||
Fast idle adj. lever stem nut | - | X | |||
Fast idle adj. lever stem nut lockwasher | - | X | |||
Fast idle adj. lever | - | X | |||
Fast idle adj. lever fulcrum screw | - | X | |||
Fast idle adj. lever fulcrum screw washer | - | X | |||
Idle air bleed | - | X | |||
Idle air bleed channel plug | - | X | |||
Idle channel screw plug | - | X | |||
Idle channel screw plug | - | X | |||
Idle needle valve | - | X | |||
Idle needle valve spring | - | X | |||
Idle tube | - | X | |||
Main body | - | X | |||
Main body attaching screw | - | X | |||
Main body attaching screw lockwasher | - | X | |||
Main body gasket | - | X | |||
Main discharge Jet | - | X | |||
Main discharge Jet plug | - | X | |||
Main discharge jet plug gasket | - | X | |||
Main metering Jet | - | X | |||
Pump check valve (comp.) | - | X | |||
Pump check valve channel plug | - | X | |||
Pump discharge nozzle | - | X | |||
Pump discharge nozzle channel plug | - | X | |||
Pump discharge nozzle channel plug (external) | - | X | |||
Pump lever (comp.) | - | X | |||
Pump lever stop screw | - | X | |||
Pump lever spring | - | X | |||
Pump lever fulcrum screw | - | X | |||
Pump lever fulcrum screw spring washer | - | X | |||
valve | - | X | |||
Pump lever fulcrum screw lock screw | - | X | |||
Upper diaphragm plate | - | X | |||
Pump lever fulcrum screw lock screw washer | - | X | |||
Cork gasket (Air dome) | - | X | |||
Pump piston and link (comp.) | - | X | |||
Spring (Discharge; | - | X | |||
Pump piston spring | - | X | |||
Snap ring | - | X | |||
Pump and link spring | - | X | |||
Washer (Valve nut) | - | X | |||
Pump and link spring cotter pin | - | X | |||
9? Stop pin and bridge assembly | - | X | |||
Pump and link spring washer | - | X | |||
Glass bowl | - | X | |||
Pump and link felt washer | - | X | |||
Diaphragm (4-62862 and Envelope - Service only) | - | X | |||
Pump piston and link washer | - | X | |||
Spring (lever) | - | X | |||
Pump piston link cotter pin | - | X | |||
Body | - | X | |||
Pump rod | - | X | |||
Cover lockwasher | - | X | |||
Pump rod cotter pin | - | X | |||
Cover and valve bushing assembly | - | X | |||
Pump rod washer | - | X | |||
Chin strap assembly | - | X | |||
Pump housing | - | X | |||
Cover screw | - | X | |||
Pump housing attaching screw | - | X | |||
Air dome | - | X | |||
Pump housing attaching screw lockwasher | - | X | |||
Valve nut | - | X | |||
Throttle lever and stem (comp.) | - | X | |||
Inlet valve spring | - | X | |||
Throttle stop screw | - | X | |||
Plunger | - | X | |||
Throttle stop screw spring | - | X | |||
Lower diaphragm plate | - | X | |||
Throttle valve | - | X | |||
Lever | - | X | |||
Throttle valve screw | - | X | |||
4 Glass bowl | - | X | |||
Throttle valve screw lockwasher | - | X | |||
Bowl gasket | - | X | |||
1930-1932 Eight | |||||
| Group Number | Group Name | Part Number | Application | Note | QTY |
Motor carburetor air cleaner | - | X | |||
Motor carburetor air cleaner | - | X | |||
Motor carburetor air cleaner (Air Maze) | - | X | |||
Motor carburetor air cleaner (Air Maze) | - | X | |||
Motor carburetor air cleaner equipment | - | X | |||
Motor carburetor air cleaner equipment | - | X | |||
Motor carburetor air cleaner connecting tube | - | X | |||
Motor carburetor air deflector retaining screw (No. 10-32 x H" fill. hd. mach.) | - | X | |||
Motor carburetor air shield assembly | - | X | |||
Motor carburetor air shield assembly | - | X | |||
Motor carburetor air valve to motor piston lubricator valve rod assembly | - | X | |||
Motor carburetor air valve to motor | - | X | |||
Motor carburetor air valve to motor | - | X | |||
Motor carburetor air valve to motor | - | X | |||
Nut (No. 10-32) | - | X | |||
Nut (No. 10-32) | - | X | |||
Lockwasher (A) | - | X | |||
Yoke end pin (') | - | X | |||
Cotter (A x W | - | X | |||
Washer-(spring A)- | - | X | |||
Motor carburetor air valve to motor lubricator valve rod ball joint | - | X | |||
Motor carburetor air valve to motor piston lubricator valve rod ball joint | - | X | |||
Motor carburetor air valve lever and pin assembly | - | X | |||
Motor carburetor air valve lever bracket and pin assembly | - | X | |||
Stud ( A') | - | X | |||
Nut (A-24) | - | X | |||
Lockwasher (A") | - | X | |||
Motor carburetor air valve lever bracket gasket | - | X | |||
Motor carburetor air valve lever bracket pin spring Washer | - | X | |||
Washer ( ,V') | - | X | |||
Screw (No. 10-32 x ? g'1 hex. hd.) | - | X | |||
Lock washer ( ,") | - | X | |||
Cotter pin ( fa x 1 V) | - | X | |||
Motor carburetor aii valve lever bracket tee | - | X | |||
Motor carburetor air valve piston | - | X | |||
Motor carburetor air valve piston | - | X | |||
Motor carburetor air valve piston | - | X | |||
Motor carburetor air valve piston and screen assembly | - | X | |||
Motor carburetor air valve rod assembly | - | X | |||
Motor carburetor air valve rod assembly | - | X | |||
Yoke end pin ( ,3 6") | - | X | |||
Cotter pin ( fa x ? g) | - | X | |||
Spring Washer | - | X | |||
Nut (No. 10-32) | - | X | |||
Nut (No. 10-32) | - | X | |||
Lock Washer | - | X | |||
Motor carburetor air valve rod ball joint (No. 10-32) | - | X | |||
Motor carburetor air valve rod ball joint (No. 10-32) | - | X | |||
Motor carburetor air valve stem spring | - | X | |||
Motor carburetor air valve stem spring | - | X | |||
Motor carburetor air valve stem spring | - | X | |||
Motor carburetor aspirating tube | - | X | |||
Motor carburetor aspirating tube No. 37 | - | X | |||
Motor carburetor aspirating tube | - | X | |||
Motor carburetor aspirating tube | - | X | |||
Motor carburetor aspirating tube jet | - | X | |||
Motor carburetor aspirating tube jet | - | X | |||
Motor carburetor body | - | X | |||
Motor carburetor body | - | X | |||
Motor carburetor body | - | X | |||
Motor carburetor body | - | X | |||
Motor carburetor (lower) body gasket | - | X | |||
Motor carburetor (lower) body gasket | - | X | |||
Motor carburetor check valve assembly | - | X | |||
Motor carburetor drain plug | - | X | |||
Motor carburetor drain plug | - | X | |||
Motor carburetor drain plug gasket | - | X | |||
Motor carburetor drain tube assembly | - | X | |||
Motor carburetor drain tube assembly | - | X | |||
Motor carburetor drain tube assembly | - | X | |||
Motor carburetor drain tube assembly | - | X | |||
Motor carburetor drain tube assembly | - | X | |||
Motor carburetor drain tube connection | - | X | |||
Motor carburetor drain tube grommet | - | X | |||
Motor carburetor float assembly | - | X | |||
Motor carburetor float chamber cover | - | X | |||
Motor carburetor float chamber cover | - | X | |||
Motor carburetor float cover | - | X | |||
Motor carburetor float cover gasket | - | X | |||
Motor carburetor float cover gasket | - | X | |||
Motor carburetor float cover gasket | - | X | |||
Motor carburetor float cover gasket | - | X | |||
Motor carburetor float cover screw | - | X | |||
Motor carburetor float cover screw lock Washer | - | X | |||
Motor carburetor float hinge pin | - | X | |||
Motor carburetor float hinge pin | - | X | |||
Motor carburetor float valve seat | - | X | |||
Motor carburetor float valve seat | - | X | |||
Motor carburetor float valve seat | - | X | |||
Motor carburetor gasket | - | X | |||
Motor carburetor gasket | - | X | |||
Motor carburetor gasket | - | X | |||
Motor carburetor gasket | - | X | |||
Motor carburetor stud | - | X | |||
Motor carburetor stud | - | X | |||
Motor carburetor stud | - | X | |||
Lockwasher (3s") | - | X | |||
Lock washer ( ,7 6") | - | X | |||
Nut (V-24) | - | X | |||
Nut (,' 6" 20 ) | - | X | |||
Motor carburetor gear retaining screw | - | X | |||
Motor carburetor kicker screw | - | X | |||
Motor carburetor kicker screw | - | X | |||
Motor carburetor metering pin assembly No. 12 | - | X | |||
Motor carburetor metering pin assembly No. 14 | - | X | |||
Gasoline filter assembly | - | X | |||
Motor carburetor metering pin gland | - | X | |||
Gasoline filter to carburetor tube assembly (prior to frame No. 282724) | - | X | |||
Motor carburetor metering pin gland | - | X | |||
Gasoline filter to carburetor tube | - | X | |||
Motor carburetor metering pin gland retaining nut | - | X | |||
Gasoline filter to carburetor tube and prior to frame No. 180595 for 740) | - | X | |||
Motor carburetor metering pin gland retaining nut | - | X | |||
Gasoline filter to carburetor tube assembly | (used on 745) (after frame No 179401) | X | |||
Motor carburetor metering pin guide | - | X | |||
Gasoline filter to carburetor tube assembly | (used on 740) (after frame No 180594) | X | |||
Motor carburetor metering pin guide | - | X | |||
Union nut (%") | (used on 726-733-740) (use with brass tubing) | X | |||
Motor carburetor metering pin guide | - | X | |||
Union nut OA") | (use with copper tubing) | X | |||
Motor carburetor metering pin guide gasket | - | X | |||
Union | (used on 745) | X | |||
Motor carburetor metering pin guide gasket | - | X | |||
Union | (used on 740) | X | |||
Motor carburetor metering pin guide gasket | - | X | |||
Gasoline filter glass clamp assembly | - | X | |||
Motor carburetor metering pin packing | - | X | |||
Gasoline filter glass | - | X | |||
Motor carburetor metering pin stem handle | - | X | |||
Gasoline filter screen | - | X | |||
Motor carburetor name plate | - | X | |||
Gasoline filter glass gasket | - | X | |||
Motor carburetor needle valve and collar assembly | - | X | |||
Gasoline gauge tube clip | - | X | |||
Motor carburetor needle valve and collar assembly | - | X | |||
Gasoline tank assembly | (used on 745) | X | |||
Motor carburetor needle seat gasket | - | X | |||
Gasoline tank assembly | (used on 740) | X | |||
Motor carburetor needle seat gasket | - | X | |||
Gasoline tank assembly | - | X | |||
Motor carburetor pump assembly | - | X | |||
Gasoline tank drain plug 0/4" hex. hd.) | - | X | |||
Motor carburetor pump assembly | - | X | |||
Gasoline tank to frame rear channel bracket-lower | (used on) | X | |||
Motor carburetor pump cup retainer packing | - | X | |||
Gasoline tank to frame rear channel bracket-lower | (used on 745) | X | |||
Motor carburetor pump cylinder | - | X | |||
Gasoline tank to frame rear channel bracket-lower | - | X | |||
Motor carburetor pump cylinder | - | X | |||
Gasoline tank to frame rear channel bracket-lower | - | X | |||
Motor carburetor pump cylinder and sleeve assembly | - | X | |||
Gasoline tank to frame rear channel | - | X | |||
Motor carburetor pump cylinder and sleeve assembly | - | X | |||
Gasoline tank to frame rear channel bracket-upper | (used on 745) | X | |||
Motor carburetor pump cylinder | - | X | |||
Gasoline tank to frame rear channel bracket-upper | - | X | |||
Motor carburetor pump cylinder | - | X | |||
Gasoline tank to frame rear channel bracket-upper | - | X | |||
Motor carburetor pump discharge nozzle | - | X | |||
Bolt (&-24 x %" hex. hd.) | - | X | |||
Motor carburetor pump discharge nozzle | - | X | |||
Lockwasher (h') | (used on 745) | X | |||
Motor carburetor pump felt | - | X | |||
Nut Oh"-24 plain) | (used on 745) | X | |||
Motor carburetor pump felt retainer | - | X | |||
Gasoline tank to frame rear intermediate channel bracket-lower | - | X | |||
Motor carburetor pump gear | - | X | |||
Gasoline tank to frame rear intermediate channel bracket-upper | - | X | |||
Motor carburetor pump housing screw | - | X | |||
Motor fuel pump changeover equipment | - | X | |||
Bolt (h-24 x %' hex. hd.) | - | X | |||
Motor carburetor pump packing Washer | - | X | |||
Motor fuel pump changeover equipment | - | X | |||
Lockwasher {h"-24) | - | X | |||
Motor carburetor pump packing Washer | - | X | |||
Motor fuel pump | - | X | |||
Nut (rV-24 plain) | - | X | |||
Motor carburetor pump piston | - | X | |||
Motor fuel pump | - | X | |||
Gasoline tank fuel pump to motor carburetor frame junction assembly | - | X | |||
Motor carburetor pump piston | - | X | |||
Motor fuel pump | - | X | |||
Screw 04-28 x Vt" hex. hd. mach.) | - | X | |||
Motor carburetor pump piston | - | X | |||
Motor fuel pump | - | X | |||
Lockwasher ()4") | - | X | |||
Motor carburetor pump piston spring | - | X | |||
Screw 5/16-24 x 7/8" hex. hd | - | X | |||
Nut 04"-28) | - | X | |||
Motor carburetor pump piston spring | - | X | |||
Screw 5/16-24 x 7/8" hex. hd | - | X | |||
Gasoline tank gauge assembly | (used on 740) | X | |||
Motor carburetor pump plunger and rod assembly | - | X | |||
Washer 5/16" plain | - | X | |||
Gasoline tank gauge assembly | (used on 745) | X | |||
Motor carburetor pump plunger and rod assembly | - | X | |||
Lockwasher 5/16" std | - | X | |||
Gasoline tank gauge assembly | - | X | |||
Motor carburetor pump shell gasket | - | X | |||
Motor fuel pump to carburetor tube assembly | - | X | |||
Screw (No. 10-32 x fill, hd.) | - | X | |||
Motor carburetor pump shell and retainer assembly | - | X | |||
Gasket | - | X | |||
Motor carburetor pump shell and retainer assembly | - | X | |||
Gasoline tank gauge tube assembly | (used on 726-826) | X | |||
Motor carburetor pump sleeve | - | X | |||
Gasoline tank gauge tube assembly | (used on 901) | X | |||
Motor carburetor pump sleeve | - | X | |||
Gasoline tank gauge tube assembly | (used on 733-833-840) | X | |||
Motor carburetor pump sleeve | - | X | |||
Gasoline tank gauge tube assembly | (used on 845) | X | |||
Motor carburetor pump sleeve | - | X | |||
Gasoline tank gauge tube assembly | (used on 904) | X | |||
Motor carburetor rack assembly | - | X | |||
Gasoline tank gauge tube bushing | - | X | |||
Motor carburetor rack assembly | - | X | |||
Gasoline gauge and supply tube clip | - | X | |||
Motor carburetor rack cover assembly | - | X | |||
Screw (No. 10-32 x 5ji hex. hd.) | - | X | |||
Motor carburetor rack cover assembly | - | X | |||
Lockwasher ( ,V) | - | X | |||
Motor carburetor silencer and air cleaner assembly | - | X | |||
Nut (No. 10-32 plain) | - | X | |||
Motor carburetor silencer and air cleaner assembly | - | X | |||
Gasoline tank inlet cover | (used on 740) | X | |||
Motor carburetor silencer and air cleaner tube | - | X | |||
Gasoline tank inlet cover assembly | (used on 745) | X | |||
Motor carburetor silencer and air cleaner tube | - | X | |||
Gasoline tank inlet cover assembly | - | X | |||
Motor carburetor silencer and air cleaner tube screw | - | X | |||
Gasoline tank inlet bushing | (used on 745) | X | |||
Lock washer (A") | - | X | |||
Gasoline tank inlet bushing | (used on 740) | X | |||
Motor carburetor silencer and air cleaner tube clamping screw | - | X | |||
Gasoline tank inlet cover gasket | (used on 740) | X | |||
Lockwasher (Yx) | - | X | |||
Gasoline tank inlet cover gasket | - | X | |||
Motor accelerator pedal bracket cover | - | X | |||
Nut (kf 28) | - | X | |||
Gasoline tank inlet cover gasket | (used on 745) | X | |||
Screw (No. 10-32 x } i fill hd. mach) | - | X | |||
Motor carburetor silencer and air cleaner support | - | X | |||
Gasoline tank inlet cover gasket retainer | (used on 740) | X | |||
Screw (No. 10-32 x B" fill. hd. mach.) | - | X | |||
Motor carburetor silencer and air cleaner support | - | X | |||
Gasoline tank inlet cover gasket retainer | (used on 745) | X | |||
Nut (No. 10-32 plain) | - | X | |||
Screw (kt-28 x Yl hex. hd ) | - | X | |||
Screw (No. 8-32 x 4") | (used on 740) | X | |||
Washer (ij " plain) | - | X | |||
Lockwasher (kO | - | X | |||
Lockwasher (No. 8-32) | (used on 740) | X | |||
Lockwasher ( ,' 6 ") | - | X | |||
Motor carburetor strainer housing | - | X | |||
Gasoline tank inlet cover hinge screw (No. 10-32 x 4" fill. hd. mach.) | - | X | |||
Motor accelerator pedal bracket cover dust Washer | - | X | |||
Motor carburetor strainer housing | - | X | |||
Gasoline tank inlet cover hinge screw | (used on 745) | X | |||
Motor accelerator pedal hole cover | - | X | |||
Motor carburetor strainer housing | - | X | |||
Nut (No. 10-32) | - | X | |||
Screw 04 ~ 28 rl'i ' hex hd.) | - | X | |||
Motor carburetor strainer housing | - | X | |||
Gasoline tank inlet cover lock | (used on 740) | X | |||
Lockwasher 04") | - | X | |||
Motor carburetor strainer housing gasket | - | X | |||
Gasoline tank inlet cover lock | (used on 745) | X | |||
Motor accelerator pedal insulating sleeve | - | X | |||
Motor carburetor strainer housing gasket | - | X | |||
Gasoline tank to motor carburetor frame junction | - | X | |||
Motor accelerator pedal insulating Washer | - | X | |||
Motor carburetor strainer housing nut | - | X | |||
Lockwasher ( f# ") | - | X | |||
Motor accelerator pedal retracting spring | - | X | |||
Motor carburetor strainer housing nut | - | X | |||
Nut ( M'-16) | - | X | |||
Motor accelerator pedal shaft | - | X | |||
Motor carburetor strainer housing screen | - | X | |||
Union nut (flared tube) | - | X | |||
Motor accelerator pedal shaft | - | X | |||
Motor carburetor strainer housing screen | - | X | |||
Gasoline tank support bracket screw | - | X | |||
Motor accelerator pedal shaft bracket | - | X | |||
Motor carburetor strainer housing stud | - | X | |||
Nut (iV-20 plain) | - | X | |||
Motor accelerator pedal shaft bracket-right | - | X | |||
Motor carburetor strainer housing stud | - | X | |||
Lock wire (5" long) | - | X | |||
Motor accelerator pedal shaft bracket-left | - | X | |||
Motor carburetor starter lever | - | X | |||
Gasoline tube front assembly | (used on 826) | X | |||
Screw (VE-28 x is" hex. hd.) | - | X | |||
Motor carburetor starter lever | - | X | |||
Gasoline tube front assembly | (used on 901) | X | |||
Screw 04-28 x ?4" fill, hd.) | - | X | |||
Motor carburetor starter lever | - | X | |||
Gasoline tube front assembly | (used on 833) | X | |||
Screw 04-28 x 1)4" hex. hd.) | - | X | |||
Motor carburetor starter lever | - | X | |||
Gasoline tube front assembly | (used on 902) | X | |||
Lockwasher (4"). | - | X | |||
Motor carburetor starter lever spring | - | X | |||
Gasoline tube front assembly | (used on 840) | X | |||
Washer (); x 34" plain) | - | X | |||
Motor carburetor starter lever spring | - | X | |||
Gasoline tube front assembly | (used on 903) | X | |||
Nut 04"-24 plain) | - | X | |||
Motor carburetor starter lever spring | - | X | |||
Gasoline tube front assembly | (used on 845) | X | |||
Motor accelerator pedal shaft bracket screw cup Washer | - | X | |||
Motor carburetor throttle adjusting screw | - | X | |||
Gasoline tube front assembly | (used on 904) | X | |||
Motor accelerator pedal shaft lever-long | - | X | |||
Motor carburetor throttle body | - | X | |||
Union nut (A" ) | - | X | |||
Motor accelerator pedal shaft lever-long | - | X | |||
Motor carburetor throttle body | - | X | |||
Gasoline tube front assembly clip | - | X | |||
Motor accelerator pedal shaft lever-short | - | X | |||
Motor carburetor throttle body | - | X | |||
Gasoline tube front assembly clip Washer | - | X | |||
Motor accelerator pedal shaft lever-short | - | X | |||
Motor carburetor throttle body | - | X | |||
Gasoline tube front clip | - | X | |||
Motor accelerator pedal shaft lever-short | - | X | |||
Motor carburetor throttle body cap screw (ki-28 x 1 g" hex. hd.) | - | X | |||
Gasoline tube front clip | - | X | |||
Spring washer (A") | - | X | |||
Motor carburetor throttle body screw | - | X | |||
Screw (No. 10-32 x )/E" fill, hd.) | - | X | |||
Taper pin (No. 0 x ?4' ) | - | X | |||
Motor carburetor throttle body gasket | - | X | |||
Screw (No. 10-32 x fill, hd.) | - | X | |||
Motor carburetor throttle body gasket | - | X | |||
Washer ( A" plain) | - | X | |||
Motor carburetor throttle body screw lockwasher | - | X | |||
Lockwasher (No. 10) | - | X | |||
Motor carburetor throttle plate | - | X | |||
Nut (No. 10-32) | - | X | |||
Motor carburetor throttle plate | - | X | |||
Gasoline tube rear assembly | - | X | |||
Motor carburetor throttle plate screw | - | X | |||
Gasoline tube rear assembly | - | X | |||
Motor carburetor throttle shaft assembly | - | X | |||
Union nut ( A") | - | X | |||
Motor carburetor throttle shaft assembly | - | X | |||
Gasoline vacuum tank assembly | (used on 726-733-740) (prior to frame No 282724 for 726-733 and 180595 for 740) | X | |||
Motor carburetor throttle shaft assembly | - | X | |||
Gasoline vacuum tank assembly | (used on 726-733-740) (after frame No 282723 for 726-733 and 180594 for 740) | X | |||
Motor carburetor throttle shaft assembly | - | X | |||
Motor fuel pump to carburetor tube assembly | - | X | |||
Gasoline vacuum tank assembly | (used on 745) (prior to frame No. 179402) | X | |||
Motor carburetor throttle shaft assembly | - | X | |||
Motor fuel pump to carburetor | - | X | |||
Gasoline vacuum tank assembly | (used on 745) (after frame No. 179401) | X | |||
Motor carburetor throttle valve control shaft | - | X | |||
Motor fuel pump to carburetor | - | X | |||
Screw (A-24 x " hex. hd.) | - | X | |||
Motor carburetor throttle valve control shaft | - | X | |||
Motor fuel pump to carburetor | - | X | |||
Lockwasher (A ") | - | X | |||
Motor carburetor throttle valve control shaft | - | X | |||
Motor fuel pump to carburetor | - | X | |||
Screw washer (3 plain) | - | X | |||
Motor carburetor throttle valve control shaft | - | X | |||
Motor fuel pump to carburetor | - | X | |||
Nut (A"-24 plain) | - | X | |||
Motor carburetor throttle valve control shaft bracket | - | X | |||
Lockwasher | - | X | |||
Gasoline vacuum tank suction tube-long-assembly | (not used with vacuum pump) | X | |||
Motor carburetor throttle valve control shaft bracket | - | X | |||
Nut | - | X | |||
Gasoline vacuum tank suction tube-long-assembly | (not used with vacuum pump) | X | |||
Motor carburetor throttle valve control shaft bracket | - | X | |||
Motor fuel pump to carburetor tube clip spacer | - | X | |||
Gasoline vacuum tank suction tube-short-assembly (after frame No. 179401) | - | X | |||
Motor carburetor throttle valve control shaft bracket | - | X | |||
Motor fuel pump to carburetor tube grommet | - | X | |||
Gasoline vacuum tank suction tube-short-assembly (prior to frame No 179402) | - | X | |||
Motor carburetor throttle valve control shaft bracket | - | X | |||
Motor fuel pump drip plug adapter | - | X | |||
Union (A" flared) | (used on 740) | X | |||
Motor carburetor throttle valve control shaft bracket | - | X | |||
Motor fuel pump drip plug | - | X | |||
Flared tube union conn. (A") | (used on 745) | X | |||
Screw (%-28 x fill. hd. mach.) | - | X | |||
Motor fuel pump drip plug | - | X | |||
Union nut | (used on 740) | X | |||
Screw 0/-28 x fill. hd. mach.) | - | X | |||
Motor fuel pump drip plug | - | X | |||
Union nut (N' flared tube) | (used on 745) | X | |||
Screw (%-28 x l A" hll. hd. mach.) | - | X | |||
Motor fuel pump drip plug | - | X | |||
Gasoline vacuum tank suction tube clip | (not used with vacuum pump) | X | |||
Lockwasher (14') | - | X | |||
Motor fuel pump eccentric | - | X | |||
Gasoline vacuum tank suction tube dash connection | (use with 14" tubing) | X | |||
Motor carburetor throttle valve control shaft collar | - | X | |||
Motor fuel pump gasket | - | X | |||
Gasoline vacuum tank suction tube dash connection | (use with" tubing) | X | |||
Taper pin (No. 0 x ? n') | - | X | |||
Motor fuel pump inlet elbow | - | X | |||
Nut (g'-24 plain) | (use with ,3 s) | X | |||
Motor carburetor throttle valve control shaft connecting rod | - | X | |||
Motor fuel pump inlet elbow | - | X | |||
Nut ( Vs"-20 plain) | (use with ]4" tube connector) | X | |||
Motor carburetor throttle valve control shaft connecting rod | - | X | |||
Motor fuel pump operating plunger | - | X | |||
Washer (%' plain) | - | X | |||
Motor carburetor throttle valve control shaft | - | X | |||
Motor fuel pump outlet connection | - | X | |||
Washer (X" plain) | - | X | |||
Motor carburetor throttle valve control shaft | - | X | |||
Motor fuel pump outlet connection | - | X | |||
Lockwasher ($$) | - | X | |||
Motor carburetor throttle valve control shaft | - | X | |||
Motor fuel pump support gasket | - | X | |||
Lockwasher ( V') | - | X | |||
Motor carburetor throttle valve control shaft | - | X | |||
Motor oil filter replacement unit | - | X | |||
Gasoline vacuum tank suction tube elbow | (used on 740) | X | |||
Motor carburetor throttle valve control shaft connecting rod | (used on 740) | X | |||
Gasoline vacuum tank suction tube elbow | (used on 745) | X | |||
Motor carburetor throttle valve control shaft connecting rod ball joint | (used on 726-733-740) | X | |||
Gasoline vacuum tank supply tube (in bulk) | - | X | |||
Ball joint | (used on 745) | X | |||
Union (A" flared tube) | (used on 745) | X | |||
Nut (No. 10-32 plain) | - | X | |||
Union (A" flared tube) | (used on 740) | X | |||
Lockwasher (A") | - | X | |||
Gasoline vacuum tank supply tube union nut (N") | - | X | |||
Motor carburetor throttle valve control shaft coupling lever | - | X | |||
Gasoline vacuum tank supply tube clip | - | X | |||
Taper pin (No. 0 x %") | - | X | |||
Screw (No. 10-32 x H" fill, hd.) | - | X | |||
Motor carburetor throttle valve control shaft lever | - | X | |||
Lockwasher ( fg") | - | X | |||
Motor carburetor throttle valve control shaft lever | - | X | |||
Washer (X" plain) | - | X | |||
Taper pin (No. 0 x %') | - | X | |||
Nut (No. 10-32 plain) | - | X | |||
Motor carburetor vane | - | X | |||
Gasoline vacuum tank vent tube (formed) | (used on 740) | X | |||
Motor carburetor vane | - | X | |||
Gasoline vacuum tank vent tube (formed) | (used on 745) | X | |||
Motor carburetor vane | - | X | |||
Gasoline vacuum tank vent tube clip | - | X | |||
Motor carburetor vane | - | X | |||
Screw (No. 10-32 x X fill, hd.) | - | X | |||
Motor carburetor vane box | - | X | |||
Screw (No. 10-32 x | - | X | |||
Motor carburetor vane box | - | X | |||
Nut (No. 10-32) | - | X | |||
Motor carburetor vane box | - | X | |||
Washer (X" plain) | - | X | |||
Motor carburetor vane box | - | X | |||
Lockwasher ( ,V) | - | X | |||
Motor carburetor assembly | - | X | |||
Motor carburetor vane check assembly | - | X | |||
Motor carburetor assembly | - | X | |||
Motor carburetor vane check assembly | - | X | |||
Motor carburetor assembly | - | X | |||
Motor carburetor vane check bushing | - | X | |||
Motor carburetor assembly | - | X | |||
Motor carburetor vane check spring | - | X | |||
Motor carburetor assembly | - | X | |||
Motor carburetor vane check spring | - | X | |||
Motor carburetor assembly | - | X | |||
Motor carburetor vane check Washer | - | X | |||
Motor carburetor adjusting screw | - | X | |||
Motor carburetor vane hinge pin | - | X | |||
Motor carburetor air cleaner equipment | - | X | |||
Motor carburetor vane hinge pin | - | X | |||
Motor carburetor air cleaner equipment | - | X | |||
1924-1929 Eight | |||||
| Group Number | Group Name | Part Number | Application | Note | QTY |
Gasoline vacuum tank vent tube clip | - | X | |||
Nut | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank vent tube clip | - | X | |||
Motor carburetor air valve spring cap | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 645) | X | |||
Screw | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 640) | X | |||
Motor carburetor air valve to motor piston lubricator valve rod assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor air valve to motor piston lubricator valve rod assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank to frame rear channel bracket | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor air valve to motor piston lubricator valve rod assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank to frame rear channel bracket-lower | (not used on 645) (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor air valve to motor piston lubricator valve rod screw | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank to frame rear channel bracket-lower | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 640) | X | |||
Motor carburetor air valve to motor piston lubricator valve rod screw | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank to frame rear channel bracket-upper | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 645) | X | |||
Nut | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank to frame rear channel bracket-upper | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 640) | X | |||
Lock Washer | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank to frame rear channel bracket bolt | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Yoke end pin | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank to frame rear channel bracket bolt | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Cotter pin | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Lock Washer | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor air valve to motor piston lubricator valve rod screw spring | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor body | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank drain plug | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor body | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve | - | X | |||
Gasoline tank gauge unit (Telegage) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 645) (prior to frame No 245696 and 171732) | X | |||
Motor carburetor body | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve | - | X | |||
Gasoline tank gauge unit (Telegage) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 645) (after frame No | X | |||
Motor carburetor body plug | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve | - | X | |||
Gasoline tank gauge unit (Teleg Age) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 640) (prior to frame No 171732) | X | |||
Motor carburetor body plug | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Screw | - | X | |||
Gasoline tank gauge unit (Teleg Age) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 640) (after frame No 171731) | X | |||
Motor carburetor body plug | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Lock Washer | - | X | |||
Screw | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor body plug gasket | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve adjusting screw | - | X | |||
Screw | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor body suction tube assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve adjusting screw | - | X | |||
Lock Washer | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor body suction tube assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve adjusting screw | - | X | |||
Gasoline tank gauge tube bushing | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor body suction tube assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Nut | - | X | |||
Gasoline tank gauge tube clip | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor body suction tube elbow assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft | - | X | |||
Screw | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor body suction tube elbow assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft (prior to motor No. 173113) | - | X | |||
Lock Washer | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor body suction tube elbow assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft | - | X | |||
Nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor body suction tube union nut | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft (prior to motor No. 250838) | - | X | |||
Gasoline tank gauge cover | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 645) (prior to frame No. 245696) | X | |||
Motor carburetor body suction tube flange gasket | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft bracket | - | X | |||
Gasoline tank gauge cover | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor body suction tube flange screw | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft | - | X | |||
Gasoline tank gauge cover | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 640) (prior to frame No. 245696) | X | |||
Lock Washer | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft | - | X | |||
Gasoline tank gauge gasket (prior to frame No. 245696 and | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor to exhaust manifold gasket | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft | - | X | |||
Gasoline tank gauge gasket (after frame No. 245695 and 171731) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Screw (N.P.) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Screw | - | X | |||
Gasoline tank gauge tube assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 343-633) (prior to frame 245696) | X | |||
Lock washer (N.P.) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Screw | - | X | |||
Gasoline tank gauge tube assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 633) (after frame No 245695) | X | |||
Motor carburetor float assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Lock Washer | - | X | |||
Gasoline tank gauge tube assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 336-626-645) (prior to frame No. 245696 and 171732) | X | |||
Motor carburetor float balance weight | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft bracket bushing | - | X | |||
Gasoline tank gauge tube assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 626) (after frame No 245696 and 171731) | X | |||
Motor carburetor float balance weight pivot | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft coupling lever | - | X | |||
Gasoline tank gauge lube assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 640) (prior to frame No 171732) | X | |||
Motor carburetor float chamber cover assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Taper pin | - | X | |||
Gasoline tank gauge and supply tube clip | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Screw | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft (after motor No. 250837) | - | X | |||
Gasoline tank inlet cover assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not | X | |||
Lock Washer | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft (after motor No. 173113) | - | X | |||
Gasoline tank inlet cover assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 640) | X | |||
Motor carburetor float chamber cover gasket | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft lever | - | X | |||
Gasoline tank inlet cover gasket | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 645) | X | |||
Motor carburetor float chamber needle valve | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft lever | - | X | |||
Gasoline tank inlet cover gasket retainer and flange assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 645) | X | |||
Motor carburetor float chamber needle | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft 626-633 and 173113 for 640 645) | - | X | |||
Gasoline tank inlet cover gasket | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 640) | X | |||
Motor carburetor float chamber needle | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor carburetor throttle valve control shaft lever (after motor No 250837 for 626-633 and 173112 for 640 645) | - | X | |||
Gasoline tank inlet cover gasket retainer | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 640) | X | |||
Motor carburetor float chamber needle | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft connecting rod | - | X | |||
Gasoline tank inlet cover hinge screw | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on | X | |||
Motor carburetor float chamber needle | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft connecting rod | - | X | |||
Gasoline tank inlet cover hinge screw | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on | X | |||
Motor carburetor gasket | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft connecting rod | - | X | |||
Nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor gasket | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft connecting rod (prior to motor No 250838) | - | X | |||
Lock washer | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 645) | X | |||
Motor carburetor gasoline inlet tube connector | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft connecting rod (prior to motor No 173113) | - | X | |||
Gasoline tank inlet cover lock | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor gasoline inlet tube connector | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft connecting rod (after motor No | - | X | |||
Gasoline tank inlet cover lock | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 645) | X | |||
Motor carburetor gasoline inlet tube | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft connecting rod (after motor No 173112) (prior to motor No. 173185-A for model 640) | - | X | |||
Gasoline tank inlet cover lock | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 640) | X | |||
Motor carburetor gasoline inlet tube | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft connecting rod | (not used on 645) (after motor No. 173184) | X | |||
Gasoline tank inlet gasket | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (not used on 640) | X | |||
Motor carburetor gasoline inlet tube | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft connecting rod ball joint | (not used on 645) (after motor No. 173184) | X | |||
Gasoline tank support bracket screw. | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor gasoline inlet tube | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve control shaft connecting rod ball joint (prior to motor No. 173185-A for model 640) | - | X | |||
Gasoline tank support bracket screw nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor gasoline inlet tube connector screw | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Nut | - | X | |||
Gasoline tank support bracket screw lock wire | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor inlet strainer assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Nut | - | X | |||
Gasoline vacuum tank assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor inlet strainer Washer | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Lock Washer | - | X | |||
Gasoline vacuum tank assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor spray mixing tube | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve shaft | - | X | |||
Bolt | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor spray mixing tube | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve shaft | - | X | |||
Bolt | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor spray mixing tube | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve shaft | - | X | |||
Screw | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor spray mixing tube set screw (after motor No. 215927) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve shaft hole plug | - | X | |||
Lock Washer | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor spray mixing tube set screw | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve shaft retainer | - | X | |||
Washer | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Set screw | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve shaft Washer | - | X | |||
Nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Set screw (special) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve shaft lock screw | - | X | |||
Gasoline vacuum tank outlet tube assembly (prior to motor No. 223847) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Nut (prior to motor No. 215928) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor throttle valve shaft lock screw | - | X | |||
Gasoline vacuum tank outlet tube assembly (after motor No. 223846) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor spray mixing tube set screw nut (after motor No 215927) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Motor vibration damper assembly | - | X | |||
Union nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor spray mixing tube set screw nut. | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank outlet tube connector | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor spray tube assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank outlet tube connector screw | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor spray tube assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank outlet tube connector nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor spray tube assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank outlet tube connector gasket | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor spray tube base gasket | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank to carburetor tube assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank supply tube (in bulk) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever | (use only on 246) (prior to vehicle No. 215000) (not used on 143 243) | X | |||
Elbow | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor assembly-upper half | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever assembly | - | X | |||
Elbow | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor assembly-upper half | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever | - | X | |||
Union nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor-upper half | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever ball (walnut) | - | X | |||
Gasoline vacuum tank supply tube clip | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor-upper half | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever ball (walnut) | - | X | |||
Gasoline vacuum tank supply tube clip | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal (extension type) (for small people) | - | X | |||
Motor carburetor assembly-lower half | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever ball (onyx) | - | X | |||
Screw | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal | - | X | |||
Motor carburetor assembly-lower half | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever ball (onyx) | - | X | |||
Screw | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal | - | X | |||
Motor carburetor to lower screw | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever ball socket-upper | - | X | |||
Screw | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal bracket | - | X | |||
Motor carburetor to lower screw lock Washer | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever ball socket-lower | - | X | |||
Lock Washer | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Washer | - | X | |||
Motor carburetor accelerator pump assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever ball socket spring | - | X | |||
Lock Washer | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Lock Washer | - | X | |||
Motor carburetor accelerator pump | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever dust cover | - | X | |||
Nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Nut | - | X | |||
Motor carburetor accelerator pump | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever dust cover Washer | - | X | |||
Nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Taper pin | - | X | |||
Motor carburetor accelerator pump | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever dust cover nut | - | X | |||
Gasoline vacuum tank supply tube bushing | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal bracket cover | - | X | |||
Motor carburetor air cleaner assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever dust cover nut | - | X | |||
Gasoline vacuum tank suction tube long assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal bracket cover | - | X | |||
Motor carburetor air cleaner assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever guide washer assembly | - | X | |||
Gasoline vacuum tank suction tube long assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Screw | - | X | |||
Motor carburetor air horn assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever guide Washer | - | X | |||
Gasoline vacuum tank suction tube long assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Screw | - | X | |||
Motor carburetor air horn assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Change speed lever support | - | X | |||
Flared tube union nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (used with copper seamless tubing). | X | |||
Nut | - | X | |||
Screw | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Screw | - | X | |||
Flared tube union nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (used with rolled brass tubing) | X | |||
Lock Washer | - | X | |||
Lock Washer | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank suction tube short assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal retracting spring | - | X | |||
Motor carburetor air horn cover screw | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank suction tube short assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal | - | X | |||
Motor carburetor air valve | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank suction tube short union nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) (used with roller brass tubing) | X | |||
Motor accelerator pedal bracket cover dust Washer | - | X | |||
Motor carburetor air valve | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank suction tube short assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal shaft bracket | - | X | |||
Motor carburetor air valve hinge | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank suction tube dash connection | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal shaft bracket | - | X | |||
Motor carburetor air valve hinge clip | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank suction tube dash connection | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Screw | - | X | |||
Motor carburetor air valve plunger | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank suction tube dash connection | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Screw w | - | X | |||
Motor carburetor air valve plunger spring | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank suction tube clip | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Screw | - | X | |||
Motor carburetor air valve plunger spring screw | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank suction tube elbow | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Washer | - | X | |||
Motor carburetor air valve spring | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank suction tube elbow | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Lock Washer | - | X | |||
Motor carburetor air valve spring | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank vent tube | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Nut | - | X | |||
Motor carburetor air valve to motor piston lubricator valve rod assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank vent tube | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal shaft lever-long | - | X | |||
Motor carburetor air valve to motor piston lubricator valve rod assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank vent tube clip | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal shaft lever-short (prior to vehicle No. 220957) | - | X | |||
Nut | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline vacuum tank vent tube clip | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal shaft lever-short (after vehicle No. 220956) | - | X | |||
Nut | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Vacuum valve stem | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator pedal shaft lever- short | - | X | |||
Lock Washer | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Atmoa. valve stem | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Taper pin | - | X | |||
Yoke end pin | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Valve stem collar | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator toe rest extension | - | X | |||
Cotter pin | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Float lever pin | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor accelerator toe rest extension | - | X | |||
Motor carburetor air valve to motor piston lubricator valve rod ball joint | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Lever connecting link pin | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Machine screw | - | X | |||
Motor carburetor air valve to motor piston lubricator valve rod ball joint | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Valve tension spring | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Machine screw | - | X | |||
Motor carburetor choke earn | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Valve stem lever pin | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Nut | - | X | |||
Motor carburetor choke cam screw | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline inlet strainer | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Lock Washer | - | X | |||
Motor carburetor choke and idle adjustment assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Vacuum tank cover and bushing assembly 3830 Cover gasket | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor choke lever | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Pipe plug | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor choke lever shaft | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Float assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor diaphragm assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Guide Washer | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor diaphragm assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Inner shell assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor diaphragm cover plate | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Lever pin | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor diaphragm to lower half screw | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Tension spring | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor diaphragm to lower half screw lock Washer | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Connecting link lever | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor economizer gasket | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Spring lever | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor economizer lever | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Guide washer retainer | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor economizer spring | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Float and trip lever | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor economizer tube assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Levers and float tension spring assembly 2292 Gasoline bushing. pipe tap | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor economizer tube assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Vent tube connection | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor float assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Vent tube nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor float chamber | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Outside shell assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor float chamber gasket | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Bracket screw (fil. head) (supersedes 7003) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor float hinge pin | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Bracket screw lock washer (1') (supersedes 2389) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor gasket | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Bracket screw nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor gasket | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Cover gasket (supersedes 17991) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor stud | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Cover screw | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor stud | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Drain cock | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Lock Washer | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Fiber float stem guide | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Lock Washer | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Flapper valve assembly (supersedes 10870 and 12720) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Nut | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline strainer assembly | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Nut | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Inner shell assembly with 16189 valve (supersedes 14560) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor gas connection stud | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Outside shell assembly (supersedes 4975) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor idle lock screw | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Top cover assembled complete with float (supersedes 3912) | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor idler screw | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Vacuum check valve | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor idle screw head | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Valve tension spring | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor idle screw ratchet | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Vent tube extension | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor inlet needle | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Vent tube extension connection | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor inlet needle valve Seat | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Vent tube extension connection nut | (After Motor No. 223022 for 336 and 223526 for 343 and 167013 for 640-645) | X | |||
Motor carburetor strainer | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter assembly (prior to motor No. 223817) | - | X | |||
Motor carburetor strainer body assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter assembly (after motor No. 223846) (prior to motor No 250838 for 626 633 and 173113 for 640-645) | - | X | |||
Motor carburetor strainer body screw | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter assembly (after motor No. 250837 for 626-633 and 173112 for 640 645) | - | X | |||
Motor carburetor strainer body gasket (Bakelite) | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter assembly (Tillotson type) | - | X | |||
Motor carburetor strainer body gasket (copper-asbestos) | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter bracket | - | X | |||
Motor carburetor spray needle assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Lock Washer | - | X | |||
Motor carburetor spray needle assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Screw | - | X | |||
Motor carburetor spray needle and bushing assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Washer | - | X | |||
Motor carburetor spray needle and bushing assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Nut | - | X | |||
Motor carburetor spray needle bushing assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter retaining nut | - | X | |||
Motor carburetor spray needle bushing gasket | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter to carburetor tube assembly | - | X | |||
Motor carburetor spray needle gasket | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter to carburetor tube assembly (prior to motor No. 250838) | - | X | |||
Motor carburetor spray needle packing nut | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter to carburetor tube assembly (prior to motor No. 173113 for 640-64S) | - | X | |||
Motor carburetor spray needle screw | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter to carburetor tube assembly (after motor No. 250837) | - | X | |||
Motor carburetor spray needle Seat | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter to carburetor tube assembly (after motor No. 173112) | - | X | |||
Motor carburetor spray needle Seat | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Union nut | (used with seamless copper tubing) (prior to motor No | X | |||
Motor carburetor stabilizer assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Union nut | (used with seamless copper tubing) (after motor No 250837 for 626-633 and 173112 for 640-645) | X | |||
Motor carburetor stabilizer well screen | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Union nut | (used with rolled brass tubing) (after motor No. 250837) | X | |||
Motor carburetor throttle plate | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Union nut | (used with rolled brass tubing) | X | |||
Motor carburetor throttle plate | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter outlet union | - | X | |||
Motor carburetor throttle shaft assembly | (After motor No. 250837 for 623-633 and 173112 for 640-645) | X | |||
Gasoline filter outlet elbow | - | X | |||
Gasoline filter outlet elbow | - | X | |||
Gasoline filter glass clamp assembly (prior to motor No. 223847) | - | X | |||
Gasoline filter glass clamp assembly (after motor No. 223846 and 167013 for 640-645) | (use with AC filter) | X | |||
Gasoline filter glass clamp assembly | (used with Tillotson filtrap) | X | |||
Gasoline filter glass (prior to motor No. 223847) | - | X | |||
Gasoline filter glass (after motor No 223846 and 167013 for 640-645) | - | X | |||
Gasoline filter glass | (used with Tillotson filtrap) | X | |||
Gasoline filter screen (prior to motor No. 223847) | - | X | |||
Gasoline filter screen (after motor No. 223846 and 167013 for 640-645) | - | X | |||
Gasoline filter screen | (used with Tillotson filtrap) | X | |||
Gasoline filter screen gasket | - | X | |||
Gasoline filter glass gasket | - | X | |||
Gasoline filter glass gasket | - | X | |||
Gasoline filter glass gasket | (used with Tillotson filtrap) GASOLINE SYSTEM (Prior to Motor No. 223023 for 336 and 223527 for 343) | X | |||
Gasoline tank assembly | - | X | |||
Gasoline tank assembly | - | X | |||
Gasoline tank to frame rear channel bracket | - | X | |||
Rivet | - | X | |||
Gasoline tank to frame cross tube support | - | X | |||
Gasoline tank gauge conduit bushing | - | X | |||
Gasoline tank gauge conduit clip | - | X | |||
Screw | - | X | |||
Lock Washer | - | X | |||
Nut | - | X | |||
Gasoline tank gauge float assembly | (not used on 143) | X | |||
Gasoline tank gauge float assembly | - | X | |||
Gasoline tank gauge float assembly | - | X | |||
Gasoline tank gauge float assembly | - | X | |||
Screw | - | X | |||
Screw | - | X | |||
Lock Washer | - | X | |||
Gasoline tank gauge float gasket | - | X | |||
Gasoline tank gauge float gasket | - | X | |||
Gasoline tank gauge pull wire | (not used on 143) | X | |||
Gasoline tank gauge pull wire | (not used on 136) | X | |||
Gasoline tank inlet cap assembly | - | X | |||
Gasoline tank inlet cap gasket | - | X | |||
Gasoline tank inlet cover assembly | - | X | |||
Gasoline tank inlet cover gasket | - | X | |||
Gasoline tank inlet cover hinge screw 7001 | - | X | |||
Motor carburetor assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Lock Washer | - | X | |||
Motor carburetor assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank inlet cover lock | - | X | |||
Motor carburetor assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank sump plug | - | X | |||
Motor carburetor assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank support bracket screw | - | X | |||
Motor carburetor stud | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline tank support bracket screw lock wire | - | X | |||
Motor carburetor stud | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank assembly | - | X | |||
Lock Washer | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank assembly 7626 | - | X | |||
Lock Washer | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Screw | - | X | |||
Nut | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Lock Washer | - | X | |||
Nut | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Washer | - | X | |||
Motor carburetor air shutter | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Nut | - | X | |||
Screw | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank outlet tube assembly | - | X | |||
Lock Washer | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Union nut | - | X | |||
Motor carburetor air shutter connecting link | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank outlet tube connector | - | X | |||
Motor carburetor air shutter connecting link | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank outlet tube connector screw | - | X | |||
Yoke end pin | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank outlet tube | - | X | |||
Cotter | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank outlet tube | - | X | |||
Motor carburetor air shutter lever connecting link pin | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank to carburetor tube assembly | - | X | |||
Link pin cotter | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank to carburetor tube assembly | (use only on body 246) (prior to vehicle No. 215000) | X | |||
Washer | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Union nut | - | X | |||
Motor carburetor air shutter shaft assembly (prior to motor No. 215928) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Flared tube connection | - | X | |||
Motor carburetor air shutter shaft assembly (after motor No. 215927) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank supply tube (in bulk) | - | X | |||
Motor carburetor air shutter shaft assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Elbow | - | X | |||
Motor carburetor air shutter shaft lever retracting spring | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Union nut | - | X | |||
Motor carburetor air shutter shaft lever retracting spring bracket (Prior to motor No. 215928) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank supply tube clip | - | X | |||
Motor carburetor air valve assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Screw | - | X | |||
Motor carburetor air valve assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Lock Washer | - | X | |||
Motor carburetor air valve cam | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Nut | - | X | |||
Motor carburetor air valve cam collar | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank supply tube bushing | - | X | |||
Motor carburetor air valve camshaft and lever assembly (prior to Motor 215928) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank shut off | - | X | |||
Motor carburetor air valve camshaft and lever assembly (after motor No 215927) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube long assembly | - | X | |||
Motor carburetor air valve camshaft and lever assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube long assembly (after motor No 215770) | - | X | |||
Motor carburetor air valve camshaft and lever assembly | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube long assembly (prior to motor No 222537) | - | X | |||
Motor carburetor air valve rocker lever | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube long assembly (after motor No 222536) | - | X | |||
Motor carburetor air valve rocker lever | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube long assembly (246) (prior to vehicle 215000) | - | X | |||
Motor carburetor air valve | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Flared tube union nut | - | X | |||
Motor carburetor air valve rocker lever connecting rod (after motor No 21S927) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube short assembly | - | X | |||
Motor carburetor air valve rocker lever connecting rod | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube short assembly | - | X | |||
Yoke end pin | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Flared tube union nut | - | X | |||
Cotter | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube assembly | - | X | |||
Motor carburetor air valve Seat | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube | - | X | |||
Motor carburetor air valve Seat | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube clip | - | X | |||
Screw | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube clip (after motor No. 222536-B) | - | X | |||
Screw | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube dash connection | - | X | |||
Motor carburetor air valve Seat gasket | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube dash connection | - | X | |||
Motor carburetor air valve Seat gasket | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank suction tube elbow | - | X | |||
Motor carburetor air valve spring-large | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Union nut | - | X | |||
Motor carburetor air valve spring -small | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Flared tube connection | - | X | |||
Adjusting nut (small springs) | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank vent tube | - | X | |||
Lock Washer | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank vent tube | - | X | |||
Motor carburetor air valve spring (large) adjusting nut | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
Gasoline vacuum tank vent tube | - | X | |||
Lock Washer | (Prior to Motor Number 250838 for 626-633 and 173113 for 640-645) | X | |||
