Re:
|
||||
---|---|---|---|---|
Home away from home
|
Here is what that repair looks like with Lab Metal.
Posted on: 2021/9/24 9:16
|
|||
|
Re: '38 1608 V12 Project
|
||||
---|---|---|---|---|
Home away from home
|
Riki,
Let me know, I might have a 45 degree cutter vs a stone. Bill
Posted on: 2021/9/17 17:14
|
|||
|
Re: '38 1608 V12 Project
|
||||
---|---|---|---|---|
Home away from home
|
Riki,
Let me know if you need any tubing, I can send you some. Bill
Posted on: 2021/9/14 14:02
|
|||
|
Re: '38 1608 V12 Project
|
||||
---|---|---|---|---|
Home away from home
|
Riki,
I have been using LabMetal which is an air hardened aluminum epoxy to build up the eroded areas. Bill
Posted on: 2021/9/14 14:00
|
|||
|
1938 Senior Headlight bucket stamping detail
|
||||
---|---|---|---|---|
Home away from home
|
After I got my headlight buckets back from media blasting I noticed that the buckets were stamped with
FLEX BEAM HEAD LAMP The lettering is on either side of the chrome strip on the top of the bucket. FLEX and HEAD are on the left side and BEAM and LAMP are on the right as you are standing in front of the car looking backwards.
Posted on: 2021/9/12 15:58
|
|||
|
Re:
|
||||
---|---|---|---|---|
Home away from home
|
I just cut them off on a lathe. It is important to use 1.5" od TUBING as 1 1/2" pipe is larger as it goes by ID size.
Here is where they go on the cover and the block. An O ring goes over the tube between the two sections Attach file: Packard transfer tube cover.jpg (163.23 KB) Packard transfer tube block.jpg (194.27 KB)
Posted on: 2021/9/12 15:43
|
|||
|
Re:
|
||||
---|---|---|---|---|
Home away from home
|
I need to replace the transfer tubes that go from the timing cover to the block. I destroyed the original ones getting them out.
On the left is one I made out of 1.5" stainless tubing, the middle is out of very thin aluminum and the one on the right is the original steel. I decided to go with the stainless as it wouldn't degrade like the aluminum one would.
Posted on: 2021/9/12 15:38
|
|||
|
Re:
|
||||
---|---|---|---|---|
Home away from home
|
Starting on body stuff. Just got the headlight pods back from the media blaster. Got to love that California Sheet metal.
Posted on: 2021/9/1 13:46
|
|||
|
Re: PLEASE READ - Packard projects available Now.
|
||||
---|---|---|---|---|
Home away from home
|
678-899-3977 and the Avanti's
Bill
Posted on: 2021/7/29 15:53
|
|||
|