Re: 1937 120 Conv. Sedan - Blanche

Posted by Don B On 2024/4/15 22:11:00
Quote:

37Blanche wrote:
Thanks.

So I am putting the sending unit into the gas tank. Ran into a problem. Not sure if this is standard or not.

It looks like the gas tank is not the same depth as the original and the new and old sending unit bottom out.

I was going to adjust the new sending unit so it will fit but was wondering if others ran into this before?

Tank is from Moparpro and sending unit from Max.

Didn’t want to go question either till I got some feedback from you guys.

Thoughts appreciated!


I recently had the same issue with the sending unit from Max Merritt. I ended up exchanging it for the one they sell for the 115C and that fit perfectly. I don’t know if my tank was replaced at some point, but the owners manual says it should be 20 gallons and that seems to be what it holds.

Here is a link to the discussion in my project blog with some details.
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?start=130&topic_id=25984&order=DESC&status=&mode=0

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=270370