I have turned the heater valve of no change.I took the top radiator hose of and run the motor .There is no water coming out.If i run a garden hose in the radiator the water will flow out of it.Can anyone explain what the impeller on the pump is supposed to look like.

I have run a garden hose in the radiator water flows freely threw the engine.does any one have a diagram of the water pump I may be missing something.

It will steam out the radiator if you drive 50 mph in about one mile.the shutters are stuck open.I have taken the heater hose of the top of the head the water will not come out if you raise it above the radiator like the pump is not pumping.Is there anything around the impeller to make it work?

My 34 standard has a over heating problem.I have cleaned the inside of the water jacket.cleaned radiator.rebuilt water pump.When I take the heater hose of I get no water coming out if it if I rase it to the top of the radiator like the pump is not pumping.Could I be missing something in the pump.THanks Tim