Re: Overdrive Transmssion Install
|
||||
---|---|---|---|---|
Home away from home
|
Got an R11 in my 36 120, think it out of a 48, bolts right up and I love it It was in the car when I bought it so I can not help with someone to procure it from
Good Luck with your beauty W
Posted on: 2021/6/9 19:07
|
|||
|
Re: Overdrive Transmssion Install
|
||||
---|---|---|---|---|
Home away from home
|
Your location? You will need the overdrive lock out cable (41 and 42 are different then later cars and are "expensive"),Bracket that holds overdrive cable to crossmember, Lower part of bell-housing for fifth bolt, rear single rubber mount for back of transmission (Steel Rubber rebuilds them with exchange of core, thrust shaft from stud on bottom of transmission to rear crossmember, regulator (looks like voltage regulator with six terminals), kick down switch and wire loom (Y an Z makes them). Also might need a rear cross member, I will have to look at my 42 to make sure. The drive shaft need to be shorten or the correct one found. I am sure that I have forgotten something. You will be amazed at the difference it will make in how the 41 moves down the road. Last point is it might be a good time to service the clutch.
Posted on: 2021/6/9 19:57
|
|||
35-1200 touring sedan 42-110 convertible coupe 48-2293 station sedan |
||||
|