Re: Need help with Brake Selector on 1934 1101 Club Sedan
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
You probably still have the original diaphragm in the selector valve; they were made of special paper and it's probably failing. Buy a new rubber one from Brian Joseph (Classic and Exotic). Just open the unit to install.
And you might also consider checking the diaphragm in the control valve, that one was also paper. The originals seem to begin to fail at about 60 - 70 years- pretty remarkable for paper.
Posted on: 2018/1/6 18:21
|
|||
|
Re: Need help with Brake Selector on 1934 1101 Club Sedan
|
||||
---|---|---|---|---|
Just popping in
![]() ![]() ![]() |
Thanks much for that info.. I went to the web site and see the silicone version. SO, I take it I just take the plate off the diaphram holder attached to the firewall and install it. Ill try that first and see if it stops the issue. Otherwise, I understand that I have to disassemble the actual selector valve to replace to other ring. Any guidance for that procedure if it becomes necessary?
Posted on: 2018/1/6 19:08
|
|||
|