|
Re: Cadillac wire wheels on a Packard Patrician?
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
We used to manufacture those Cadillac wheels. Yes they are a direct fit to 56 Seniors, for earlier cars you must break away the alignment pin. A good strong whack with a medium ball pien hammer does the trick.
Certain models use a smaller 4 1/2" bolt pattern and the Caddy wheels do not fit 54-55 clippers with 11" brakes 40-41 sixes
Posted on: 2016/10/27 17:56
|
|||
|
||||
|
Re: Cadillac wire wheels on a Packard Patrician?
|
||||
|---|---|---|---|---|
|
Home away from home
|
How about drilling a pin hole in the wheel? I have done this to fit later wheels to older Chrysler products. Is the center register the same? What about wheel bolts? Are the Packard bolts compatible with the Cad wheels? It so happens there is a 54 Patrician for sale near here, and a 1986 Cadillac with wires.
Posted on: 2016/10/27 18:03
|
|||
|
||||
|
Re: Cadillac wire wheels on a Packard Patrician?
|
||||
|---|---|---|---|---|
|
Home away from home
|
One quick whack with a hammer sure beats drilling a hole in exactly the right place, besides you can do it with a dull hammer and no electricity.
I described all you have to do to use the Caddy wheels
Posted on: 2016/10/27 20:06
|
|||
|
||||
|
Re: Cadillac wire wheels on a Packard Patrician?
|
||||
|---|---|---|---|---|
|
Home away from home
|
OK thanks for the info. If it's all the same to you would rather not go smashing things with a hammer. I or someone else, might want to go back to stock wheels some time.
Posted on: 2016/10/27 20:28
|
|||
|
||||
|
Re: Cadillac wire wheels on a Packard Patrician?
|
||||
|---|---|---|---|---|
|
Home away from home
|
The original wheels can be used without the pin. It is used only to aid in locating the orig wheels so that they line up with the holes. Without the pin you have to "look" to line them up, hardly a hardship
Posted on: 2016/10/27 21:31
|
|||
|
||||
|
Re: Cadillac wire wheels on a Packard Patrician?
|
||||
|---|---|---|---|---|
|
Home away from home
|
Unless you already had a set of Cadillac wire wheels, wouldn't it make more sense to just buy new Packard wire wheels from Coker?
Posted on: 2016/10/27 22:10
|
|||
|
West Peterson
1940 Packard 1808 w/Factory Air 1947 Chrysler Town and Country sedan 1970 Camaro RS packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=4307&forum=10 aaca.org/ |
||||
|
||||
|
Re: Cadillac wire wheels on a Packard Patrician?
|
||||
|---|---|---|---|---|
|
Home away from home
|
That is just it, I know where I can get a set of Cadillac wires locally. Otherwise I would not have thought of changing. This is purely theoretical as I have not bought the Packard or the wheels yet. It was just something I was wondering about.
Posted on: 2016/10/27 22:23
|
|||
|
||||
|
Re: Cadillac wire wheels on a Packard Patrician?
|
||||
|---|---|---|---|---|
|
Home away from home
|
Did a little checking and it seems I can have a set of Coker Packard wires and wide whites delivered to Canada for around $6000 not including import duty.
They are asking $500 for the whole Cadillac.
Posted on: 2016/10/28 1:44
|
|||
|
||||
