Re: 1955 Antenna Switch Bezel
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
The nut is captured inside the bezel so you need the special tool to fit over the shaft, slide in the bezel and turn the nut. Troy at Michiana Packards has repro'd the tool as have some of the regions.https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=15649&forum=4&post_id=157339#forumpost157339
You can also make something that works by obtaining 1/4" hollow or internally threaded hex standoff material and drilling the center out to accept the 3/16" shaft.
Posted on: 2015/10/5 17:36
|
|||
Howard
|
||||
|
Re: 1955 Antenna Switch Bezel
|
||||
---|---|---|---|---|
Quite a regular
![]() ![]() ![]() |
Thank you for your quick reply.
Posted on: 2015/10/5 18:17
|
|||
|
Re: 1955 Antenna Switch Bezel
|
||||
---|---|---|---|---|
Quite a regular
![]() ![]() ![]() |
I received the tool from Troy at Michiana Packards and want to report that it worked great. I was able to secure the switch and bezel into the dash and everything is back to normal. The tool is a must have for anyone that needs to work on the dash/switches in a V-8 Packard, thanks again Troy.
Posted on: 2015/10/14 13:06
|
|||
|