Re: Twin Ultramatic oil strainer
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
The screen is toward the valve body and the exposed side looks like a flat piece of metal. Held on by a single nut in the middle. Here is a photo of the bare filter from Max's site and another side view from the SM showing where it fits. No good straight on shots of the filter in the manual.
If yours is missing, the large outlet port is cast into the valve body but I don't remember if the other port is a cast part of a valve body or maybe a short press in tube going into a valve body. If it is a tube and the screen is missing the tube may be too.
Posted on: 2017/5/29 18:33
|
|||
Howard
|
||||
|
Re: Twin Ultramatic oil strainer
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
oh. that.
I have that but didn't know what that was. Just took it off and now I see. Sorry for the naive question, but thanks for a quick response. It's all clean now.... thanks again, -Bob
Posted on: 2017/5/29 21:16
|
|||
Bob
1955 Packard Patrician Sapphire Blue |
||||
|