Re: Brake drum removal - 1954 Packard Clipper
|
||||
---|---|---|---|---|
Webmaster
|
No, the peg is not supposed to be removed. If the front drums are stuck, it may be because the brake shoes are expanded so much they are catching on the drum, contract them using the star adjuster. No puller should be needed, but if you need a little extra leverage you can put the wheel back on use it to get a better grip on the drum. Just catch the bearings so they dont fall on the floor. Everything is covered in the shop manual.
Generally once the cotter pin the axle nut is removed, then the drum should just pull off by hand.
Posted on: 2012/7/23 13:38
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: Brake drum removal - 1954 Packard Clipper
|
||||
---|---|---|---|---|
Just popping in
|
Thank you. I'm learning as I go.
Posted on: 2012/7/23 14:34
|
|||
|