Re: 1963 Exner Packard Revival... AMC where were you?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
How about a 66' "Modern Version of a Great Classic Car"?
Oh yeah, it's 12 cylinder and sleek and sassy!
Posted on: 2017/5/29 11:28
|
|||
|
Re: 1963 Exner Packard Revival... AMC where were you?
|
||||
---|---|---|---|---|
Not too shy to talk
![]() ![]() ![]() |
Great concept!..I always though with Roy Abernathy (formerly of Packard) the chairman at AMC, whom went on a program to compete head-to-head with the Big Three (and Teague head of styling)that why didn't they try a Packard revival..maybe the bad blood between Nance and Romney in the mid 50's had something to do with it? A Packard revival would of given current AMC/Rambler owners a 'step-up' brand and AMC could of reaped additional profits and prestige if the concept was executed the right way.
Posted on: 2017/5/29 14:31
|
|||
|
Re: 1963 Exner Packard Revival... AMC where were you?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Gotta believe those old Renwal models are highly prized today. Wonder how many they made.
Agreed, AMC needed a high end money maker and Packard was probably the best option given the players involved. No idea why they didn't act on the opportunity. The Packard name was dropped from S-P in, I think, 1962. "...executed the right way" was the key. Exner's idea was out there for all to see, with elements deemed worthy enough to not only be used on the '79 Riviera but, with the front fenders and bumper caps, on the '70 Olds Toronado. A V12 would have been fabulous. Probably AMC's 390 CID 315 HP V8 powering what would have been around a 3700 lb car would have been more than sufficient. Developing a 4-door would have been more costly because AMC would have probably needed to lengthen the wheelbase 3-4 inches for rear legroom. There are images on the internet that show Exner's green car modified. http://www.curbsideclassic.com/wp-content/comment-image/417974.jpg
Posted on: 2017/5/29 19:08
|
|||
|
Re: 1963 Exner Packard Revival... AMC where were you?
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Yes, the word Packard was dropped from the corporate name in 1962 but I'm sure the Packard trademarks continued to be maintained by Studebaker and I believe later on into the Stubebaker-Worthington era. I don't recall the time and details of their later distribution, The Packard Club got some of the trademarks, Gullickson some others for his venture.
Posted on: 2017/5/29 20:14
|
|||
|
Re: 1963 Exner Packard Revival... AMC where were you?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Lots of fun with the modified AMC - they were indeed excellent at working on minimal budgets. I'd say that in 1962 this car would be a Clipper or a Hawk replacement. Competition would be the Thunderbird or Riviera. Possibly the more conventional Wildcat/Starfire/Grand Prix/non letter 300. Use the corporate V8.
AMC would be smart enough to not send a Packard coupe up against Cadillac/Lincoln. Imperial was already selling in very small numbers there, even using lots of corporate parts.
Posted on: 2017/5/30 10:14
|
|||
|
Re: 1963 Exner Packard Revival... AMC where were you?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Hi
AMC never ventured into the personal luxury segment in a serious way, but if they were to have done so, the late 1960's were the times to do it. Their Ambassador, once the wheelbase increased to 122" by lengthening the cowl to axle another four inches, produced the required long hood/short deck proportions. The hardtop coupe re-skinned with the Exner design would have made a fit competitor for the Grand Prix/Toronado/Riviera/Thunderbird class. As such, if it caught on, AMC could have had a piece of what was a very lucrative class well into the next decade. To challenge the Eldorado/Continental Mark III heavy weights would have required AMC to greatly up their game in fit and finish as well as interior execution. The Ambassador DPL models demonstrated they could do just such, though would have to go much further for a true luxury contender. Certainly, a higher level of mechanical and chassis refinement was in order beyond their usual offerings. The AMC 401 with fuel injection would have filled the bill. Considering whether they might have used the Packard name: it would have been their best option as no luxury marque name was in their corporate heritage, discounting "Lafayette" last applied to a low-priced series. Hudson was still remembered for its sporting history, not luxury. The by-then Studebaker-Worthington likely would have gladly written a royalty agreement to license it for so many dollars for each car sold under the name. The market then was receptive to marque revivals, witness the Auburn Speedster, Cord 8/10, Stutz Blackhawk, even the Avanti II. Approached as a mainstream rather than the 'boutique' offering, tastefully executed neo-classic styling, bespoke quality and refined drive-ability could have made it a successful and worthwhile Packard revival. Steve
Posted on: 2017/6/4 17:26
|
|||
.....epigram time.....
Proud 1953 Clipper Deluxe owner. Thinking about my next Packard, want a Clipper Deluxe Eight, manual shift with overdrive. |
||||
|
Re: 1963 Exner Packard Revival... AMC where were you?
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
The discussion we are having is probably fairly reflective of what would have occurred amongst AMC's planners and leaders had they pursued the opportunity, with the debate eventually landing on uniqueness of car and target market. I prefer to play the role of Packard-As-Top-Dog stalwart: "Let's not make the same mistake Packard did years ago! We either go after the best with an even better car or we don't go at all!"
The Stutz Blackhawk, a car based on the humble GM A-body, commanded over $20,000, Elvis getting the second prototype. It was effectively an intermediate with a super long hood and bespoke interior and exterior. AMC needed to match it in verve and at a price comparable to Cadillac and Lincoln. Upon careful review of the Blackhawk and closer inspection of Exner's Packard proposal, my conclusion is that the AMC Ambassador as modified above probably would have come up short, able to compete with near luxury cars only. It needed a Wow factor, which I tried to dial in below with a 4 inch decrease in body length and 4 increase in axle-to-dash, retaining the 122 wb. I also fashioned front fender bumper caps like the Ex car. What I don't show but what was absolutely essential was Ex's striking 3-dimensional grill and front appearance rather than the boring 2-dimensional mod I made above. Ex's screwball half grill atop overwrought bumper needed to go though, replaced by full height grill. In addition to Steve's suggestion for a 401 Fuelie would have included an independent rear suspension and 4-wheel disc brakes. Together with radial tires and unibody would have made mincemeat of Eldorado and Mk III in the handling department. Here's a good source for 1969 vehicle dimensions. Ambassador was wide enough and with an impressive wheelbase but a bit short in length, though I think it would have worked in this application. http://www.oldcarbrochures.com/static/NA/Pontiac/1969%20Pontiac/1969%20Pontiac%20Competitive%20Comparison%20Booklet/index1.html
Posted on: 2017/6/7 18:18
|
|||
|