headliner bow grommets
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
anyone know where you can get the grommets for the headliner bows
55-56 400,,4 doors are different
Posted on: 2016/6/20 19:03
|
|||
Riki
|
||||
|
Re: headliner bow grommets
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
thanks, h,
didn't think of that, I made some with standard grommets, with another rubber flat piece, with a 1/4 inch hole, it works, but , does not support end of rod that good, the hole is 11/16ths, I was at autozone today, and there was a PVC grommet that had that taper end on it, but, inside hole to big, Toyota,
Posted on: 2016/6/20 19:36
|
|||
Riki
|
||||
|
Re: headliner bow grommets
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
looks like the tire valve stems are the way to go, they are 3/4" OD, same valve stem used for Packard rims, the large ones,
cut 4 going to try them tomorrow, 6-24-2016
Posted on: 2016/6/21 0:54
|
|||
Riki
|
||||
|