Re: '35-'38 Topshift Clutch and Rear Bearings
|
||||
---|---|---|---|---|
Home away from home
|
Both the 304123 and 304124 were used in all '35-'54 Packard transmissions except O/D trans and 35-39 V-12 and '35-'38 big eight and super 8.
Either they are misboxed or you do not have a Packard trans. Give me the #'s from the bearings themselves and the 6 digit casting # from the trans case Mysteries solved at no charge
Posted on: 2016/7/5 16:01
|
|||
|
Re: '35-'38 Topshift Clutch and Rear Bearings
|
||||
---|---|---|---|---|
Just popping in
|
Thanks,very generous.
Wish I could afford to just buy all the best new stuff, but have to try to economize. If you're a Kanter from Kanter...I have an order for the cluster gear rollers, rear seal and gasket set written up in front of me for you guys! Pretty damn, in fact positive I have a Packard box, as I am elbows deep in the thing and everything else matches up. I will get the numbers tomorrow, the box case numbers are readable as I have cleaned, blasted and painted the box. I have the gear lever and top assembly here with me for now Pictures enclosed until I get case numbers. Thanks again.
Posted on: 2016/7/5 16:38
|
|||
|
Re: '35-'38 Topshift Clutch and Rear Bearings
|
||||
---|---|---|---|---|
Home away from home
|
Sure looks like a 35-38 top cover, awaiting #'s from edges of bearings
Posted on: 2016/7/5 18:58
|
|||
|
Re: '35-'38 Topshift Clutch and Rear Bearings
|
||||
---|---|---|---|---|
Just popping in
|
Ok bearing numbers are MRC 306 SG for the one boxed as 304123
MRC 207 SG for the one boxed as 304124 They are in "Genuine Packard Parts" boxes with new labels taped on. Thanks for the help!
Posted on: 2016/7/5 19:44
|
|||
|
Re: '35-'38 Topshift Clutch and Rear Bearings
|
||||
---|---|---|---|---|
Just popping in
|
Case numbers on transmission are 30251-1 over 11-11. Any help is appreciated!
Posted on: 2016/7/7 16:36
|
|||
|