Re: Brake pedal removal / help appreciated!
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Anyone?'
Posted on: 2019/9/2 16:53
|
|||
1951 200 Deluxe Sedan Valiant Green Metallic
Vehicle #:2462 8372 |
||||
|
Re: Brake pedal removal / help appreciated!
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Jason,
My '47 is a different design, but if you haven't already, I would take a look at the Part Diagram Plate #63 in the Parts list on this site. Doesn't show very clearly, but might give you some clues until someone else chimes in. From the diagram, it looks to me that the zerk end should have a c-clip or something to hold that end in place. I see the parts list calls for 1.30655 "retaining ring". Good luck, Mark
Posted on: 2019/9/2 22:56
|
|||
|
Re: Brake pedal removal / help appreciated!
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
In your third photo, there is a washer next to the pedal on the passenger side, then next to it a circular cup that holds everything in place.
Removal of the clip will allow the shaft to be moved towards the drivers side so that the pedal can be taken out.
Posted on: 2019/9/2 23:15
|
|||
|
Re: Brake pedal removal / help appreciated!
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
thanks Gents, that made all the difference!
Posted on: 2019/9/4 12:28
|
|||
1951 200 Deluxe Sedan Valiant Green Metallic
Vehicle #:2462 8372 |
||||
|