Packard Forum Index » Project Blogs

Topic: RIk's 56 ultramatic

Bottom

Previous Topic

Next Topic Register To Post

« 1 ... 35 36 37 (38) 39 40 41 ... 75 »

R H

Re: RIk's 56 ultramatic

#371

Home away from home

Amazon.

They are for a Polaris RZR.900-1000 turbo..2016-2020. 9 bucks a piece.

Block. PT. No..4015778

Posted on: 2020/12/11 18:19

Riki

56Clippers

Re: RIk's 56 ultramatic

#372

Home away from home

I used the EATON C4559-3.
eaton.com/content/dam/eaton/products/ele ... ta-sheets/bus-ele-ds-2071-c4559.pdf

Posted on: 2020/12/11 22:11

cortes121

Re: RIk's 56 ultramatic

#373

Just can't stay away

Thank you both for these options

Posted on: 2020/12/12 23:49

- Anthony

1955 Packard Clipper Custom
1951 Kaiser Deluxe

R H

Re: RIk's 56 ultramatic

#374

Home away from home

Holes fit.

A lot taller.

Could cut it down. But. Doesn't get in the of anything

Attach file:

(288.94 KB)

(448.48 KB)

Posted on: 2020/12/13 15:36

Riki

R H

Re: RIk

#375

Home away from home

Jb weld. Clear is not what to use. Door Heat it turns to rubber. Wind wing frame. Washers need to be below yellow line...

Where'd something that flowed.

Last picture punch to put holes in Windows sweeps. My rube Goldberg set up. Torque converter in my wise.

Picture of rebound rubber. Packard and Buick with threads.

Window motor. 65 years. Not much grease. It does now.

Attach file:

4498_60037d9c12ba6.jpg (319.41 KB)

4498_60037e413b0ae.jpg (309.88 KB)

4498_60037e792cea9.jpg (349.71 KB)

4498_60037ead5ef9d.jpg (216.87 KB)

4498_60037edc654b8.jpg (246.27 KB)

4498_60037f114f2ae.jpg (253.93 KB)

Posted on: 2021/1/16 18:58

Riki

R H

Re: RIk

#376

Home away from home

Power steering pump. And seal

National. ER 90850.

Seal. 0.750. X 1.250.

3/4× 1-1/4. By. 0.250 wide. 1/4. Inch.

Bearing

NTN. 6203 LU.

Attach file:

4498_600646138cce3.jpg (281.60 KB)

4498_6006464754b44.jpg (259.34 KB)

Posted on: 2021/1/18 21:38

Riki

R H

Re: RIk

#377

Home away from home

youtu.be/Bb7J54jwQ0g

Attach file:

20201229_152441.jpg (225.60 KB)

20201225_212910.jpg (309.80 KB)

20201226_181351.jpg (154.93 KB)

Posted on: 2021/1/20 12:11

Riki

R H

Re: RIk

#378

Home away from home

The rotor . is sensitive. Can't just bolt one side.
Rotor binds. The big outside one.

So to tighten. You need all bolts.

Vise is holding lower half. Pulling spins free.

Attach file:

20210121_202356_HDR.jpg (311.84 KB)

20210118_132115.jpg (304.39 KB)

Posted on: 2021/1/22 0:21

Riki

R H

Re: RIk's 56 ultramatic

#379

Home away from home

Where my dad's 56 patrician was bought

1000 S Hope St
1000 S Hope St, Los Angeles, CA 90015
maps.app.goo.gl/8SPaTWme5znhF77M7

Posted on: 2021/1/24 4:31

Riki

R H

Re: RIk

#380

Home away from home

Speed nut for spring. Cover.

Regular speed nut won't work. Looks like I will have to machine it..

11/16ths x 7/8s..

5/16ths - 18 thread. But needs to be smaller..

Packard..Eaton speed nut on the left. The right regulator speed nut.

Attach file: