Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
|
Trans oil and diesel let it soak
Posted on: 2021/3/6 19:10
|
|||
Riki
|
||||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
|
Thank you, Riki,
50/50 mix? Will a plastic bucket be ok, or should it be metal? Covered or uncovered?
Posted on: 2021/3/6 20:01
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
|
You could just sell it to me as it is and let me figure it out!
Posted on: 2021/3/7 3:13
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
|
Dump it in Evapo rust for a week. Then soak in the ATF/diesel and acetone.
Posted on: 2021/3/7 8:04
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
|
A little rant 1st.
We had ice and snow a couple of weeks back. My live oaks at home dumped everything leaf and most bushes looked like they should be replaced. I’m down at the shop. I have the greenest and healthiest weeds! I also found the decomposing rodent that I could only smell before. Now on with what I did today
Posted on: 2021/3/13 17:20
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
|
Thanks again to all the suggestions.
I took off the rotted hose, and the remains of the fan belt. I 1st used Sam’s club degreaser. And scrubbed, and scrubbed, wire brushed, and wire brushed........... Attach file: D2B46970-7F62-4214-B65E-CFE5A1213CB8.jpeg (194.22 KB) E91F0707-85BE-4598-A3BF-586354C13ABB.jpeg (173.32 KB) E57C9136-8498-4399-A818-933CACF4F1CA.jpeg (243.39 KB) 9472D239-5309-4E53-8FA4-92B58CA193AC.jpeg (251.95 KB)
Posted on: 2021/3/13 17:25
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
|
After all of the degreasing the bolts started falling out of the housing.
I then tried wrenching the ones with nuts and bolts, and they came out. The hardest one was one of the slotted screws. And then I found the issue. Attach file: 02488CC1-A063-4835-B634-32451F191526.jpeg (368.80 KB) 0BD88517-F345-4D3E-A5A7-19E53046F7E6.jpeg (337.54 KB) 8D7E9AD2-45B2-4CE4-88F4-43FCF5FDED6C.jpeg (388.24 KB) 8C869578-B3A0-4B42-B5FB-93B303E3D061.jpeg (394.86 KB) C84822EB-E6EE-4D38-AC68-8FF9BF03D043.jpeg (227.06 KB)
Posted on: 2021/3/13 17:30
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
|
More scraping and scrubbing.
I wire wheel brushed the bolts. The pump turns freely now! And into the rust bath for a while. Attach file: 41442910-8181-4B10-B1E9-4AA472C327EE.jpeg (405.31 KB) CC86CEF2-67C2-455E-BCFC-CAF9CF1712AE.jpeg (163.72 KB) 13373009-DAA4-44CA-B9CA-FE66B27C5E0E.jpeg (405.93 KB) 7F7A0FA6-2B0E-40C3-A283-1E7BB5051E19.jpeg (340.24 KB) 29526F5C-2649-4A34-AC44-71A72310855D.jpeg (183.87 KB) 51C251C8-ABAA-4A0D-89E1-04E900D34BAB.jpeg (481.66 KB) 2A604616-AD6A-48A5-A89A-C8D076876D63.jpeg (309.68 KB) 19D7878F-C4C3-4297-99AD-7C1AC4160F7B.jpeg (185.94 KB)
Posted on: 2021/3/13 17:37
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
|
One week later and the water pump came out better than I thought. I sprayed the rust block and letting it dry before putting it back together.
It really spins nice. Thanks again for the advice. Attach file: FDC84E3D-5A4C-4D39-91E5-5A9B36972CEA.jpeg (124.33 KB) A8BD00B5-4329-49C8-9D3B-B2D3B33A03B4.jpeg (603.40 KB) D79DCAF5-B137-4207-BC34-BDD089264D93.jpeg (680.32 KB) 56171110-01A2-4F76-AF20-09ABA6F736CB.jpeg (482.50 KB) 3EB8371D-9F4A-4FED-99E0-A916D7AD1E55.jpeg (589.95 KB) 65ECEC0B-41C6-4A89-A302-DF19CC4FA078.jpeg (362.82 KB) D6EC5C97-2979-4033-AC6F-A88B3C4DE46D.jpeg (472.90 KB) 2F3B1748-5C63-4975-AE2C-6EDA47D1B3B9.jpeg (172.76 KB)
Posted on: 2021/3/20 16:50
|
|||
|