Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Trans oil and diesel let it soak
Posted on: 2021/3/6 19:10
|
|||
Riki
|
||||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thank you, Riki,
50/50 mix? Will a plastic bucket be ok, or should it be metal? Covered or uncovered?
Posted on: 2021/3/6 20:01
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
You could just sell it to me as it is and let me figure it out!
Posted on: 2021/3/7 3:13
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Dump it in Evapo rust for a week. Then soak in the ATF/diesel and acetone.
Posted on: 2021/3/7 8:04
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
A little rant 1st.
We had ice and snow a couple of weeks back. My live oaks at home dumped everything leaf and most bushes looked like they should be replaced. I’m down at the shop. I have the greenest and healthiest weeds! I also found the decomposing rodent that I could only smell before. Now on with what I did today
Posted on: 2021/3/13 17:20
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks again to all the suggestions.
I took off the rotted hose, and the remains of the fan belt. I 1st used Sam’s club degreaser. And scrubbed, and scrubbed, wire brushed, and wire brushed........... Attach file: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
Posted on: 2021/3/13 17:25
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
After all of the degreasing the bolts started falling out of the housing.
I then tried wrenching the ones with nuts and bolts, and they came out. The hardest one was one of the slotted screws. And then I found the issue. Attach file: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
Posted on: 2021/3/13 17:30
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
More scraping and scrubbing.
I wire wheel brushed the bolts. The pump turns freely now! And into the rust bath for a while. Attach file: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
Posted on: 2021/3/13 17:37
|
|||
|
Re: Transmission fluid and acetone dip or something else
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
One week later and the water pump came out better than I thought. I sprayed the rust block and letting it dry before putting it back together.
It really spins nice. Thanks again for the advice. Attach file: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
Posted on: 2021/3/20 16:50
|
|||
|