Sprang	After rebuilt Ultramatic I have 2 bolts in excess	#1
Just popping in Joined: 2015/1/22 3:49 Last Login : 2023/7/26 7:30 From Fredericia, Denmark Group: Registered Users Posts: 6	Please refresh my memory I had to mount the actuator, these 2 bolts were together with screws and cover. I do not remember where they belong? 1/4 UNC with gray paint on the bolt head Attach file:   20220513_115511_resized (002).jpg (306.01 KB)   bolts.jpg (133.59 KB) Posted on: 2022/5/14 1:12

R H	Re: After rebuilt Ultramatic I have 2 bolts in excess	#2
Home away from home Joined: 2012/4/10 21:35 Last Login : Today 11:22 From San Diego, CA USA Group: Registered Users Posts: 2582	Something that long.. Would be low or reverse brake. But those look crusty. Outside trans somewhere.? Posted on: 2022/5/14 6:30
	Riki

Ross	Re: After rebuilt Ultramatic I have 2 bolts in excess	#3
Home away from home Joined: 2008/3/21 20:20 Last Login : Today 6:28 Group: Registered Users Posts: 2988	Those are not from any original Packard installation on an Ultramatic. Posted on: 2022/5/14 6:34

Sprang	Re: After rebuilt Ultramatic I have 2 bolts in excess	#4
Just popping in Joined: 2015/1/22 3:49 Last Login : 2023/7/26 7:30 From Fredericia, Denmark Group: Registered Users Posts: 6	Ross Do you know where they can fit. Posted on: 2022/5/22 10:14

JeromeSolberg	Re: After rebuilt Ultramatic I have 2 bolts in excess	#5
Home away from home Joined: 2016/11/24 12:38 Last Login : 6/14 18:36 From Berkeley Group: Registered Users Posts: 666	My one thought is those could go to the covers for thr bottom of the torque converter housing or the two little "wings" that link that to the bottom of the engine. A few of those bolts are really long. But they are installed after the ultramarine is attached to the engine. Posted on: 2022/5/22 16:06

Ross	Re: After rebuilt Ultramatic I have 2 bolts in excess	#6
Home away from home Joined: 2008/3/21 20:20 Last Login : Today 6:28 Group: Registered Users Posts: 2988	Sorry, I can't think of any place for 2 inch long 1/4 inch bolts. An aftermarket muffler clamp of some sort?? Posted on: 2022/5/22 20:30

JeromeSolberg	Re: After rebuilt Ultramatic I have 2 bolts in excess	#7
Home away from home Joined: 2016/11/24 12:38 Last Login : 6/14 18:36 From Berkeley Group: Registered Users Posts: 666	I thought he said they were 1/4 UNC. I don't know what size they are, but the bolts I was thinking of are these, on the "wing" that bolts from the engine oil pan area to the bottom of the converter housing. Attach file:   20220522_205930.jpg (4.43 KB) Posted on: 2022/5/22 23:02