Merry Christmas and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
61 user(s) are online (42 user(s) are browsing Forums)

Members: 1
Guests: 60

BigKev, more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal



« 1 2 (3) 4 5 6 »

Re: 1937 Super 8 not restarting when hot
#21
Home away from home
Home away from home

Ernie Vitucci
See User information
Good Morning...I agree with 901. Coil for sure and the condenser as well. The condenser will fail more often than the coil will. Good to keep a spare condenser in the tool kit/spare parts that stays in the Packard. Ernie in Arizona

Posted on: 10/12 10:11
Caretaker of the 1949-288 Deluxe Touring Sedan
'Miss Prudence' and the 1931 Model A Ford Tudor 'Miss Princess'
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#22
Home away from home
Home away from home

TxGoat
See User information
A bad condenser can cause rapid burning of points, and so can a bad coil, so check your points carefully even if they are new.

Posted on: 10/12 11:45
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#23
Not too shy to talk
Not too shy to talk

PackDan
See User information
Thank you all for the help. I will change the condenser, it is fairly new, but you never know. the coil is definitely going to be changed. I just need to find one with the bottom input.

Posted on: 10/14 12:37
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#24
Not too shy to talk
Not too shy to talk

tom abel
See User information
just read your thread and saw where you said that you put a piece of sheet metal in where the heat riser is to keep heat off of intake.actually just the opposite will happen. its like having the heat riser stuck on all of the time. the stuck open heat riser may give you cold start issues but giving more gas will overcome that,however a stuck closed heat riser will kill car when hot by creating a vapor lock condition as gas will boil because of excess temp in carb area of intake. remove the metal and see if that doesnt help. you may have other problems. generally though points and condenors show up more on cold starts than hot. not saying they cant have hot issues but generally show up when engines are cold.

Posted on: 10/14 13:08
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#25
Not too shy to talk
Not too shy to talk

PackDan
See User information
I think I'm looking at the heat riser wrong. When I say "open" the flap is allowing exhaust to go up into the intake cavity heating the intake. The piece of sheet metal blocks the exhaust from going up and heating the intake and carb. When the car is running you can put your hand on the intake. We blocked it off so as not to boil the carb. Should I be saying that the original riser is rusted closed?

Posted on: 10/15 14:04
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#26
Home away from home
Home away from home

TxGoat
See User information
If the original heat riser is stuck in the position that directs heat up around the intake manifold plenum, it is stuck closed, which is typical. If you leave it there, and also block the exhaust flow up into the manifold, you may have a severely restricted exhaust, which will cause overheating and poor performance. A diagram would be helpful.

Posted on: 10/15 19:17
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#27
Not too shy to talk
Not too shy to talk

Retired
See User information
Without pumping the gas pedal hold it to the floor while cranking the engine. Always works on my 237 c.u. six

Posted on: 10/15 19:36
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#28
Home away from home
Home away from home

Bob Supina
See User information
Instead of waiting to find a coil like the original with the wire connection on the bottom, just buy a 6v coil and strap it to the original with velcro or tie wraps and make temporary connections to prove/disprove the condition of the original coil.

Let us know the result.

Bob

Posted on: 10/15 20:02
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#29
Home away from home
Home away from home

Joe Santana
See User information
John Ulrich sells a coil with input on the bottom like original, but a $25 coil for proof of concept makes sense. And yes, pedal to the metal and don’t lift up or pump when starting hot.

Attach file:



jpeg  IMG_8122.jpeg (23.16 KB)
1067_670f1eaaee78b.jpeg 294X248 px

Posted on: 10/15 20:54
 Top  Print   
 


Re: 1937 Super 8 not restarting when hot
#30
Not too shy to talk
Not too shy to talk

PackDan
See User information
I will give this a shot. (Palm on face "duh")

Posted on: 10/17 9:08
 Top  Print   
 




« 1 2 (3) 4 5 6 »





- The following Google Ad-Sense Advert helps fund the cost of providing this free resource -
- Logged in users will not see these. Please Join and Donate to help support the website -
Search
Recent Photos
Photo of the Day
Recent Registry
Upcoming Events
Website Comments or Questions?? Click Here Copyright 2006-2024, PackardInfo.com All Rights Reserved