Packard Forum Index » Post-War (1946-54)

Taking the engine apart the second time is much easier than the first! I actually know what I'm doing and everything is nice and clean from the first time.





This is #4, my cylinder that is basically dead. The exhaust valve has barely been sealing at all. After pulling the head I can tell exactly which cylinders have better compression by how clean they are.





The bottom of #4 exhaust valve looks basically like the top! That is, it's being as exposed to the combustion! I suspect it wouldn't take too long, running like this, to wear out a valve guide and stem. I don't think these valves get great lubrication at the best of times.





If the shop has time to machine the head, and grind the valves for me next week, I'll be able to get the car back together next week as well!

The Cavalier is going to be purring like a kitten!

Why do you want to machine the head? My understanding is that there isn't much that can be taken off these heads before it starts getting too close to the valves. If there isn't a problem with the head, it may be best to just leave it as is. I don't think your compression problem was due to a head/gasket problem. It looks like all valve seats/faces to me.