|
Ever seen a lifter like this ???
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
I found these lifters in a Packard V8 some time back and I've never seen anything remotely like them or even half so complicated. They're .904".
    Inside the body at the bottom, visible through the figure-8 hole is the fine thread cut inside, locating a threaded adjuster piece. Also inside the body about one-third the way down, there's a tiny locating pin pressed in through a hole in the side of the body. To further complicate things, the engine had adjustable pushrods, suggesting they aren't true hydraulic lifters. A search did find the patent - http://www.google.com/patents/US2818846" rel="noopener external" title="">Mechanical self-adjusting valve tappet Ever seen anything like this? Who made it and why? jack vines
Posted on: 2014/11/18 12:17
|
|||
|
||||
|
Re: Ever seen a lifter like this ???
|
||||
|---|---|---|---|---|
|
Forum Ambassador
 
|
Thanks Jack for posting that, it's a fascinating device and I've never seen anything like it before.
Posted on: 2014/11/18 13:01
|
|||
|
||||
|
Re: Ever seen a lifter like this ???
|
||||
|---|---|---|---|---|
|
Home away from home
|
Since they came out of an engine which had run at some time in its' past, they obviously worked.
jack vines
Posted on: 2014/11/18 19:16
|
|||
|
||||
