No!

Here is a photo of the clips.

Attach file:

---

  (177.32 KB)

What is the width size you need? I have moulding clips for 3/4 or 1" moulding.
50 clips for $10.00

greendragon, please pm me, I need some more 46/47 parts thanks

This thread can be closed. I have found a 1948 stabilizer bar. It is installed and works fine.

I need to locate someone who can rebuilt the front stabilizer bar end links for my 46 Packard clipper deluxe. One is bent and the other is about to come off the bar at the top. The lower rubber bushings are obtainable at any auto parts store. Thanks

1946 packard clipper deluxe.

Hi All, Here is the end of the story. I checked with 2 local exhaust shops and they wanted $100 just for the tailpipe, I would have to get the correct muffler and they would do the headpipe for $75. I went with Kepich. He was $220 including shipping for the complete system in aluminized steel and the same guage as the other venders. The system arrived 2 days after it shipped from North Carolina. The tailpipe was 2 pieces so installation was a snap. Everything went together smoothly and I'm very satisfied and glad I used Kepich. I purchased via e-bay.

This is the rest of the story! Thanks for listening

Hi Dan, When replacing your window I would recommend going to a local glass shop. My friend and I have had good experiences using the locals. One reason is that your original glass can be used as a pattern,plus can be removed from the lift channel, channel cleaned or repaired/painted if necessary, then new glass installed in the lift channel. Also, no shipping costs incurred. Good Luck!

Has anyone had any experiences with the following exhaust system suppliers-
Waldron Exhaust, Kepich Exhaust or Classic Exhaust Inc.? I have listed according to the most expensive ($350) to least expensive ($215) for the complete system including shipping. I need a muffler and tailpipe and am considering using one of the above. Your input would be appreciated. Thanks