|
Re: Stuck Valve
|
||||
|---|---|---|---|---|
|
Just popping in
 
|
Valves looked ok and looked to be seating, there was very little play from side to side with them, as were with some other cylinders that have commpression.
Posted on: 2009/8/7 21:25
|
|||
|
Justin Newtown CT.
51' 200 sedan |
||||
|
||||
|
Re: Stuck Valve
|
||||
|---|---|---|---|---|
|
Just popping in
|
Put the head back on with new gasket, cleaned all the carbon build up. Still no compression, going to test to see if its blowing by rings, intake, or exhaust valve. any advice??
Posted on: 2009/8/6 17:55
|
|||
|
Justin Newtown CT.
51' 200 sedan |
||||
|
||||
|
Re: Stuck Valve
|
||||
|---|---|---|---|---|
|
Just popping in
|
Perfect, thank for your help!!!!!
Posted on: 2009/7/26 18:07
|
|||
|
Justin Newtown CT.
51' 200 sedan |
||||
|
||||
|
Re: Stuck Valve
|
||||
|---|---|---|---|---|
|
Just popping in
|
Took the head off today, valves are all moving. Lot of crud, soaking with seafoam and going to scrape clean. I need to know the tork specks and sequence for 51' 200 with 327
Posted on: 2009/7/26 15:45
|
|||
|
Justin Newtown CT.
51' 200 sedan |
||||
|
||||
|
Door lock assembly spring
|
||||
|---|---|---|---|---|
|
Just popping in
|
Any ideas where to find a spring for the pass. rear door lock assembly???
Posted on: 2009/7/14 16:11
|
|||
|
Justin Newtown CT.
51' 200 sedan |
||||
|
||||
|
Stuck Valve
|
||||
|---|---|---|---|---|
|
Just popping in
|
Did a compression test and one cylinder has 35 pounds. I put in alittle oil to check the rings, still 35. Any ideas?
Attach file:  (101.24 KB)
Posted on: 2009/6/21 18:23
|
|||
|
Justin Newtown CT.
51' 200 sedan |
||||
|
||||
