Packard Forum Index » Pre-War (1899-1942)

Topic: 1941 110 Club Coupe

Bottom

Previous Topic

Next Topic Register To Post

Pat and Melanie Westerkamp

1941 110 Club Coupe

Home away from home

I picked this part up from one of the vendors great OEM part good condition but the brace does not look right for the coupe or am i just not seeing how it works, one of the angled ends has to go against to trunk lid so the one piece is actually way too small the other might work but the plate isnt straight up and down when used alone.....i have no idea if the plate is supposed to be straight or lay with the trunk, how long should the brace be????????

Edit: sorry guys to many irons in the fire, I fill stupid

Attach file:

(245.97 KB)

(123.28 KB)

Posted on: 2020/1/16 17:48

Pat and Melanie Westerkamp

1941 Packard 110 Club Coupe Deluxe

Packard Newbie

Re: 1941 110 Club Coupe

Home away from home

Can you attach a picture of what you're referring to, Pat??

Posted on: 2020/1/16 17:52

'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700

Dell

Re: 1941 110 Club Coupe

Home away from home

Sounds like you have a sedan assembly. As stated be fore a picture would be great. I don't have my parts book with me, but am sure the coupe and sedan are different.

Posted on: 2020/1/16 17:54

35-1200 touring sedan
42-110 convertible coupe
48-2293 station sedan

Dell

Re: 1941 110 Club Coupe

Home away from home

I found two different assemblies listed in parts book. I would say if the handle and lock all work to open and close the trunk use it. One thing you have wrong is the short tube goes inside the trunk. Look at the pictures, brown car is my 42 other one is a friends 41-110 that lives in my shop, You can always get a longer tube and bolt and bind the support after you unbolt it from the pot metal ( do not bend attached to the pot metal ). Good luck

Attach file:

(184.36 KB)

(160.30 KB)

(220.50 KB)

Posted on: 2020/1/18 23:06

35-1200 touring sedan
42-110 convertible coupe
48-2293 station sedan

Pat and Melanie Westerkamp

Re: 1941 110 Club Coupe

Home away from home

Quote:

Chevmn56 wrote:
I picked this part up from one of the vendors great OEM part good condition but the brace does not look right for the coupe or am i just not seeing how it works, one of the angled ends has to go against to trunk lid so the one piece is actually way too small the other might work but the plate isnt straight up and down when used alone.....i have no idea if the plate is supposed to be straight or lay with the trunk, how long should the brace be????????

Edit: sorry guys to many irons in the fire, I fill stupid

You where right, the small piece on the inside.... Thank you soo much

Posted on: 2020/1/19 16:10

Pat and Melanie Westerkamp

1941 Packard 110 Club Coupe Deluxe

Board index » Discussion » Pre-War (1899-1942) » 1941 110 Club Coupe

Top

Previous Topic

Next Topic

	';
Merry Christmas and welcome to Packard Motor Car Information! If you're new here, please register for a free account.