Packard Forum Index » Pre-War (1899-1942)

Does anyone know if a 29 speedo face will fit a 28 speedo housing, or have a 28 face, or parts speedo.

They look to be the same based on the front. If you need parts, you might want to contact this Ebay seller and see if he still has the unit available. It didn't sell, and the listing just ended.

ebay.com/itm/Vvintage-North-East-Speedom ... t=true&rt=nc&_trksid=p2047675.l2557

The ebay is sold.

I have many mechanical parts for the NorthEast unit used in the 28-31 Packards.
Internal pot metal frame is usually the failure cause.

39six sedan man, I think all I need is front side of the speedo . Mine was stolen some time between looking at pac and when I came back togather it. the horn radiator cap clock frame rail covers with latches drivers window crank and speedo where taken. So I have only seen speedo in pics. I have looked for one for 6 months, only been able to find pieces I think are right. I have the back and internals but now face just an open hole with guts and numbers. I think its correct.but no front cover or face. There's a guy in nj.with 3o face for 150. But I have no idea if same. The fronts where oval on about 4in round for years and I dont know if there inter changeable. U or anyone u know have an idea.