Packard Forum Index » Pre-War (1899-1942)

Topic: fan belt

Bottom

Previous Topic

Next Topic Register To Post

jimw

fan belt

Home away from home

Does anyone know a source for fan belts for a 1929 Packard 640 (with the water pump inline, not on side).

Posted on: 2021/5/6 10:21

Owen_Dyneto

Re: fan belt

Forum Ambassador

Very old Dayco # is 28403. Dimensions in inches given as 40-1/4 effective length, 40-27/32 outer circumference, width 7/8, angle 38 degrees.

Posted on: 2021/5/6 10:46

Ken_P

Re: fan belt

Home away from home

vbeltsupply.com has a huge selection of v-belts, where you can pick based on the specs Dave so handily listed for you.

Posted on: 2021/5/6 11:19

1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry

1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry

jimw

Re: fan belt

Home away from home

Thanks for the info. I ordered a Dayco 28403 belt from Amazon of all places.

Posted on: 2021/5/7 11:56

jimw

Re: fan belt

Home away from home

Got the Dayco 28403 fan belt and it doesn't fit. The length seems like it would work if the belt wasn't as wide as it is and the angle was sharper. Anyone have any other suggestion?

Posted on: 2021/5/16 20:01

Owen_Dyneto

Re: fan belt

Forum Ambassador

Did the width and angle match the specs I gave earlier?

Posted on: 2021/5/16 20:47

Ken_P

Re: fan belt

Home away from home

I'll again refer you to vbeltsupply.com - they were great.

Posted on: 2021/5/17 9:17

1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry

1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry

Board index » Discussion » Pre-War (1899-1942) » fan belt

Top

Previous Topic

Next Topic

	';
Merry Christmas and welcome to Packard Motor Car Information! If you're new here, please register for a free account.