Re: 1941 Packard 110 Deluxe Heater & Windshield Wiper Motor in Need of Service
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
No info on who might work on them other than J Pinto Electric. When another poster checked about them doing his AC motor it appears they are rather expensive.http://jpintoweb.com/Home_Page.php Not sure if his price was for a simple repair or a total cosmetic rebuild.
In the AC thread discussing that motor tolandis mentioned a possible place: Have not used them in years, but they have done many a small motor for me. All Safe Electric, in Canoga Park, Calfiornia.818-340-0974. There are probably other places mentioned in Hemmings. If your heater is the 4 wire reversible motor combination heater/defroster you may need to inquire if he has a test switch or if he needs your switch. The issue could be in the switch as well as the motor. On most electric only places, I think they may only want the motor and not the complete heater assy -- same for the wiper so something else to inquire about.
Posted on: 2014/7/14 8:55
|
|||
Howard
|
||||
|
Re: 1941 Packard 110 Deluxe Heater & Windshield Wiper Motor in Need of Service
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Ragtime,
I'd suggest pulling the wiper and fan motors out, then assessing them. You may be able to repair yourself, or find a local place that can do simple electrical wire repair. I installed the 40 electric wipers in my 39 and had to repair the motor winding leads and essentially the entire harness of the wiper. The winding leads were a bit more complex because it required opening the motor; hopefully you don't have to do that. The usual issue with motors of these types (just as today) is the oil reservoir in the bearings runs dry, then dust and other contaminants bind the shaft. This can usually be resolved with a bit of light oil. Beyond that, clean electrical connections and switch contacts are the key. The fatal blow would be if the motor windings have been damaged; that usually requires a replacement motor. Good luck on the project. Pat
Posted on: 2014/7/14 11:31
|
|||
|