Re: removing cane shifter on 33 1003
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Gee, that looks a bit different than my 34 and I would have thought they'd be identical, especially as the transmission is identical and the bodies are nearly identical. The cane is retained in the socket by a large conical spring from below. So you don't remove the cane from the transmission, you remove the entire cane assembly. It's been 40 years or more since I looked at mine but as I recall access to the cane assembly retaining screws (6 of them, one showing in your photo) was simple and fast - perhaps you're missing something simple about removing the black metal section of floor panel around the cane?
Posted on: 2014/8/13 22:25
|
|||
|
Re: removing cane shifter on 33 1003
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
thanks O-D; my 28 comes out the top and i guessed there might be a trick to the 33. dell
Posted on: 2014/8/14 9:34
|
|||
35-1200 touring sedan 42-110 convertible coupe 48-2293 station sedan |
||||
|