Re: Need clock hand for our Third Series (1925)...
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Have you looked at any of the clock places for replacement hands. No idea of the size needed but several have repro hands that are shaped a lot like that one.
Posted on: 2016/5/3 21:01
|
|||
Howard
|
||||
|
Re: Need clock hand for our Third Series (1925)...
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Have not started posting on clock forums....thought this would be the best place to start.
Posted on: 2016/5/4 0:29
|
|||
|
Re: Need clock hand for our Third Series (1925)...
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Hadn't thought of clock forums but also a good place. Was thinking of clock DIY places like Klockit or Norkro or Clockworks that have reproduction hands in various lengths. There is a spade hand that is vey similar in looks. If a set is available in the length you need, a bit of fine tuning with a small jewelers file and some paint and I'd bet the shape of the hand could be made identical. If not, maybe changing the pair and I expect very few would pick up on the subtle difference.
Posted on: 2016/5/4 8:49
|
|||
Howard
|
||||
|
Re: Need clock hand for our Third Series (1925)...
|
||||
---|---|---|---|---|
Just can't stay away
![]() ![]() ![]() |
I have several spare hands from the non-working clocks I purchased to repair the Jaeger piece in my 526. Put a caliper on your shaft and let me know the size. The spare I have is free to a good home if it'll fit!
Posted on: 2016/5/4 9:52
|
|||
|
Re: Need clock hand for our Third Series (1925)...
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Many thanks for all the responses.
Will try to get the shaft dimension tomorrow. Bob
Posted on: 2016/5/4 20:05
|
|||
|