Packard Forum Index » Pre-War (1899-1942)

I am running 15 inch Packard wheels on my 37 115c. I am looking for Packard Hubcaps that either say Packard, 115, or "6" something. I have some that say 110, but am looking for something that "matches". Thanks in advance. Neil

Attach file:

---

  (207.09 KB)


  (221.11 KB)

Hi Neil,
You might get a hold of these guys...https://www.hirschauto.com/1937_38-SIX-110-PACKARD-HUBCAP/productinfo/PACHUB-07/
I see the '37's are currently 'out of stock' but they might be getting more in. If not, the '39's are very similar and would fit. If that is more than you want to spend - I'd post an ad in our 'Packard Parts & Misc.- for sale, wanted, trade' on this forum and see if anyone has. Notwithstanding, you could keep a close watch on Ebay and you might get lucky, as I have seen some good ones go through there from time to time... Good luck. Chris.

Thanks for the reply. My problem is that I switched from the original 16 inch wheels to 15 inch and I am not familiar enough with Packard's to know when the size change occurred and what 15 inch hubcaps would look "right" for a 1937, 6 cylinder. Thanks again.

Not 100% certain, but from appearances, those are 41-120 wheels. If that is indeed the case, the correct 37 hubcaps will fit. "Packard Six"

Quote:

Yes, can confirm that the 115C hubcaps will fit the later 15" wheels up to the 22nd Series.

Thank you very much guys. Will look for some at Hershey.