Packard Forum Index » Post-War (1946-54)

Topic: Repair panels for 1947 Clipper

Bottom

Previous Topic

Next Topic Register To Post

Clemens

Repair panels for 1947 Clipper

Just can't stay away

Is there any company out there fabricating repair panels for a 1947 Clipper?
I've found this thread here, the company mentioned in post #3 does some panels for a '49, but not for a '47 Clipper.

I am in need of the moldings where trunk and chassis are connected.
Resized Image

I could fabricate them myself, but then summer will be over ...

Regards,
Clemens

Posted on: 2014/8/26 8:25

Ok, well for starters I'll have
Who, What, When and Where,
and then Whither, Whether, Whence and Wherefore to follow
and one big sideorder of Why.

... and the parts list please

HH56

Re: Repair panels for 1947 Clipper

Forum Ambassador

None that I know of. The link you have -- C2cfabrications is about the only company making repair panels for Packards. The bodies are similar enough that some of the panels for 48-50 will work on the earlier Clippers but don't believe they have much for that area you need and don't believe any of theirs are just drop in. Several threads here regarding the amount of cutting and forming that still need to be done to make their panels work.

Posted on: 2014/8/26 8:38

Howard

Board index » Discussion » Post-War (1946-54) » Repair panels for 1947 Clipper

Top

Previous Topic

Next Topic

	';
Merry Christmas and welcome to Packard Motor Car Information! If you're new here, please register for a free account.