Re: 356 water pump to block bolt washers.
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Look carefully at the pump casting and you'll see slight recesses in the casting where the copper washers are to go. Don't forget to shellac (or Permatex) the threaded studs that go into the water jacket if you've removed them.
Posted on: 2014/12/16 8:22
|
|||
|
Re: 356 water pump to block bolt washers.
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Here is a photo of the water pump as installed on my formerly owned 47 Custom Clipper. I was careful about the length of the bolts and noted those which screwed into the water jacket; hence, the markings. You can see the ones with the copper washers, the bottom ones. Hope this helps.
(o{}o) Attach file: ![]() ![]()
Posted on: 2014/12/16 12:48
|
|||
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|
Re: 356 water pump to block bolt washers.
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks JW, that helps alot.
Posted on: 2014/12/16 15:19
|
|||
1963 Morris Cooper 997
1969 Austin 1800 ![]() |
||||
|
Re: 356 water pump to block bolt washers.
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks Owen, for the tip on the recesses for the copper washers.
Posted on: 2014/12/18 0:07
|
|||
1963 Morris Cooper 997
1969 Austin 1800 ![]() |
||||
|