Packard Forum Index » Post-War (1946-54)

Subject pretty much sums it up, I'm trying to remove the fabric seal running down the front door pillars, and it is stuck where it tucks into the sides of the dash assembly.

I've removed the big screws at the bottom of the window molding, and anything noticeable underneath. But the Dash won't budge.

I've added pics to Webshots that will hopefully help you folks understand what I am referring to. Direct links to the problem in question are as follows:

rides.webshots.com/photo/2408794430051605899copRIq

rides.webshots.com/photo/2962559970051605899LnKNmv

rides.webshots.com/photo/2831214960051605899OYMhCO

rides.webshots.com/photo/2469977860051605899ZBDPPP

Hope you folks can assist.

These are a few of the things attached to the dash in a 47. There are others such as the hood releases and I think a radio bracket. Also several screws under the windshield molding. I believe the 22-23 series would be very similar but won't swear to it. The welting has both tacks and a clip or two holding it.

Attach file:

---

  (36.34 KB)


  (40.21 KB)


  (45.25 KB)


  (43.83 KB)