|
Re: hood lacing installation
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
Lay the lacing over the cowl and tape it down leaving open where the holes in the cowl are. Mark the lacing with chalk at the holes. Remove and place on bench then carefully cut with an Xacto knife the center of the lacing out where you have marked it.
Thread the wire through the lacing and through the hooks at the holes.
Posted on: 2017/1/22 17:58
|
|||
|
||||
|
Re: hood lacing installation
|
||||
|---|---|---|---|---|
|
Home away from home
|
Sorry to be slow to get this, but I ordered enough materials for two 833 coupes since I have two that need this, I only have 6 hooks total.
I understand putting in place and marking and cutting, but still not sure how to weave the wire with the lacing. Thanks for your help and any more input would be appreciated! Barry
Posted on: 2017/1/22 20:28
|
|||
|
1925 333 Phaeton
1926 Phantom 1 Rolls Royce 1926 Hudon super six Coupe 1927 Peerless Roadster 1927 433 7 passenger limo 1928 Peerless coupe 1929 Peerless Boatail coupe 1929 Phantom I Rolls Royce 1930 Springfield Phantom 1 Regent 1931 L-29 Cord 1931 833 Convertible 1931 833 Opera Coupe 1934 Phantom 11 Rolls Royce 1934 1101 Roadster 1934 1101 Coupe 1934 V12 Opera coupe 1936 120 |
||||
|
||||
