Packard Forum Index » Pre-War (1899-1942)

I am in AUSTRALIA and are unable to find diagram for the owen dyneto, I have a 1930 strait eight roadster convertible.
there is no current coming from the generator after having it rewound, we believe the auto elec has connected the wires incorrectly inside the generator.
if anyone has a wiring diagram or detailed pictures of the wiring inside it would be a great help.

The 30 wiring diagram on PAC website appears to show the generator internal wiring although I don't know if it is an Owen Dyneto.http://www.packardclub.org/wiring/1930wiring-8cyl.JPG

thanks for the response, we are after a detailed diagram of inside the owen gen as it was completely re wound and all the wires were taken of and replaced, but incorrectly we suspect.

From: Auto-Electrician's Manual, Standard Engineering and Publishing Company, Edition T, 1934. Diagram for an Owen-Dyneto CD-865 generator.

Attach file:

---

  (66.14 KB)

LOVE YOUR WORK, HAVE SENT IT TO THE GEN REBUILD GUY LETS SEE IF HE CAN DO CORRECTLY NOW.

THANKS HEAPS

You're welcome. Aside from the cutout/control unit which did vary a bit over the years, the internal wiring should be the same for any Owen-Dyneto generator of the 3rd brush type as used thru 1936.