Re: Intake gasket
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
I'm not sure if you can get them individually or not, but they should be contained in a "valve grind" gasket set which is almost certainly available from Kanters, Merritt, Egge, and others. They will probably be fresh new stock of the "Best" brand.
Posted on: 2013/1/26 9:48
|
|||
|
Re: Intake gasket
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
not sure if Jack Vines sells individual parts but u can try him:
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=9869&forum=8&post_id=104516#forumpost104516 Mite be chaeaper in the long run to buy a gasket set as Owen Dyneto recommends. AFAIK there the gaskets are Packard V8 specific so there is no X-ref number to some other make or model of engine that is not Packard.
Posted on: 2013/1/26 12:09
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: Intake gasket
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I've got intake manifold gaskets, but the cork gaskets for the valley cover get used up quickly.
jack vines
Posted on: 2013/1/26 12:16
|
|||
|