Re: power window parts
|
||||
---|---|---|---|---|
Forum Ambassador
|
I don't think Packard ever made replacement parts available for V8 switches -- or any other for that matter, just entire switch assys. Is the phenolic broken or is the narrow end of the contact button burned flush to the phenolic side so it won't make the connection to the contact plate? Depending on the damage maybe a repair is possible??
Switch is made by Delta so the switch internals and maybe the switch itself -- only with a different bezel -- was probably used by other mfgs. Someone familiar with other brands might know if there were repair kits available from another make. GM used to make fairly low level repair kits but don't know if that is the same switch they used.
Posted on: 2013/2/23 12:08
|
|||
Howard
|
||||
|
Re: power window parts
|
||||
---|---|---|---|---|
Not too shy to talk
|
Hello Howard it is the bottom part that has broken off, both metal connectors are missing. There is a seller on ebay has these parts ( new and used) but says he cannot get to a post office to mail them to me (how a person who sells on ebay cant get to a post office is beyond me !!) so was hopeful someone may know where to purchase these. Be good if you have any tips on a repair that i could do myself. thankx Jamie
Posted on: 2013/2/24 6:11
|
|||
|
Re: power window parts
|
||||
---|---|---|---|---|
Home away from home
|
You might try Mike Dulinski, he has many of the V8 Packard parts and has helped me out many times. I can't find his contact info right noe, but it is here on the site somewhere.
Posted on: 2013/2/24 7:18
|
|||
Bob
IF EVERYTHING IS COMING YOUR WAY ... - - - - - - - - - - - - - - - - - - - - - - - - YOU'RE IN THE WRONG LANE! '56 Executive Touring Sedan |
||||
|
Re: power window parts
|
||||
---|---|---|---|---|
Forum Ambassador
|
Mike Dulinski contact info is in the directory.https://packardinfo.com/xoops/html/modules/mxdirectory/singlelink.php?cid=3&lid=230 Suggest phone or write him a letter. His email does not seem to get his attention or the address is wrong.
As to the ebay vendor not being able to get to the post office, If he is somewhere in the area the snow storm buried last week then that would be totally understandable -- but would think things had cleared a bit by now.
Posted on: 2013/2/24 9:43
|
|||
Howard
|
||||
|