|
Re: Engine starting problem
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
BEFORE the rebuild:
Didd the engine start and run with the OLD ignition parts???
Posted on: 2014/10/18 23:31
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: Engine starting problem
|
||||
|---|---|---|---|---|
|
Home away from home
|
If u have a dwell meter hook that up to the distributor or coil. If the dwell is erratic then very likely worn distributor bushings assumming a good coil and condenser.
Posted on: 2014/10/18 23:48
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: Engine starting problem
|
||||
|---|---|---|---|---|
|
Home away from home
|
No better feeling that successfully starting a rebuilt engine for the first time. Pleased to hear it was a minor item causing the problem. It usually is.
(o{}o)
Posted on: 2014/10/20 10:50
|
|||
|
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|
||||
