|
Re: mikes 1948 super 8
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
Mike...... I look forward to that day. Maybe in the fall as our weather in southern Arizona is quickly changing to hot. Expecting 90 degrees today and I got to get some decent drives in before it is too hot drive during the daytime. Today. I'm off to 'the town too tough to die' in the 400. The pics from Good Guys look like you all had fun. Good looking family you've got there.
Posted on: 2013/3/13 10:50
|
|||
|
||||
|
Re: mikes 1948 super 8
|
||||
|---|---|---|---|---|
|
Just can't stay away
 
|
Making progress with the door panels, they are not original but i thought they came out pretty nice for under 100 dollars for all four doors and kick panels.
Attach file:  (105.79 KB) (78.05 KB) (69.81 KB)
Posted on: 2013/6/23 18:06
|
|||
|
Mike
|
||||
|
||||
|
Re: mikes 1948 super 8
|
||||
|---|---|---|---|---|
|
Forum Ambassador
 
|
Hi Mike, those look fantastic! Especially for being done in 108 degree weather. I wish there was more to report going on with the '40, but not in the heat right now. We'll have to meet up out at Power Rd. one Saturday evening for cruise in.
Jim
Posted on: 2013/6/23 19:54
|
|||
|
||||
|
Re: mikes 1948 super 8
|
||||
|---|---|---|---|---|
|
Just can't stay away
|
I'm looking for a 1948 lwb super eight wheel. One wheel is different and the hubcap wont seat properly from what i have read it looks like I'm looking for a 6 inch wide wheel with the larger center hole, any help would be greatly appreciated thanks
Posted on: 2013/9/6 16:03
|
|||
|
Mike
|
||||
|
||||
|
Re: mikes 1948 super 8
|
||||
|---|---|---|---|---|
|
Home away from home
|
I have one, its stamped 15-600L. PM me if interested. Thanks
Posted on: 2013/9/6 16:37
|
|||
|
||||
|
Re: mikes 1948 super 8 cracked cylinder
|
||||
|---|---|---|---|---|
|
Just can't stay away
|
Rough weekend, while addressing a cracked head I found my #4 cylinder cracked all the way across to the intake valve. I keep a very close eye on my temp and normally run around 160 to 180 degrees and 200 degrees when stopped at a light. This engine has about 6000 miles on the rebuild, the pistons are .060 over could that have something to do with the crack, any suggestions to the possible cause would be greatly appreciated, thanks Mike
Attach file: (85.04 KB) (60.73 KB)
Posted on: 2014/12/31 15:21
|
|||
|
Mike
|
||||
|
||||
|
Re: mikes 1948 super 8
|
||||
|---|---|---|---|---|
|
Home away from home
|
The crack may have slipped by the inspection 6K miles ago. VERY easy to happen.
Is that a hardened steel seat on the intake that was installed at last overhaul????
Posted on: 2014/12/31 16:10
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: mikes 1948 super 8
|
||||
|---|---|---|---|---|
|
Home away from home
|
Pictures are decieving, but for 6k miles (assuming a rebore 6K miles ago) that looks like a lot of ridge at the top of the cylinder.
Posted on: 2014/12/31 16:19
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: mikes 1948 super 8
|
||||
|---|---|---|---|---|
|
Just can't stay away
|
I may have been missed it, but the previous valves were cracked so I had the machine shop dye penetrate the valve seat area before I reassembled it. I did not have hardened seats installed do you think it would be wise to do that on the next block?
Posted on: 2014/12/31 16:22
|
|||
|
Mike
|
||||
|
||||
