Battery Size 1941
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
anyone out there know if a Group 4 case fits a 1941 regular body underseat tray? A Group 2 is smaller.
Posted on: 2015/5/28 14:57
|
|||
|
Re: Battery Size 1941
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I think that's what I'm looking at: Group 4, 975 CCA
Posted on: 2015/5/28 15:33
|
|||
|
Re: Battery Size 1941
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
You might check the depth of your tray. That would seem to be an issue if repro tray sizes are the same as on the actual cars. Ulrich and San Diego PI have Gr 2 repro trays around 7" deep but the Gr 4 battery appears to be 9 3/8 high. I would wonder if the terminals would clear the cover with a sufficient margin of safety.
Posted on: 2015/5/28 15:39
|
|||
Howard
|
||||
|
Re: Battery Size 1941
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
good advice - I often lazily leave the cover off for access
Posted on: 2015/5/28 15:48
|
|||
|
Re: Battery Size 1941
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
The large NAPA Grp 4 commercial is more than 1000 CCA, though I forget the exact number; it was NAPA #7210 some years back but I seem to recall it was assigned a new number - got 11 years of service from that one. Also you might check a Delco 4HD6V battery - comparable specs - that's the Grp. 4 I currently have in my 34, now in it's 7th year.
Posted on: 2015/5/28 15:49
|
|||
|
Re: Battery Size 1941
|
||||
---|---|---|---|---|
Just can't stay away
![]() ![]() ![]() |
NAPA battery # is 7212. 9 1/2 inches high. Have used same in my 1940/356 with excellent results.
Posted on: 2015/5/28 16:28
|
|||
|
Re: Battery Size 1941
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks to all. Bought a 7212 and will drop it in tonight
Posted on: 2015/5/29 7:17
|
|||
|
Re: Battery Size 1941
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
not so easy. catching in the curves where the floor hole is rounded. I pulled out the cradle that sits on the two heavy bars - 11 7/8 between the end hoops vs 12 1/2 case did you guys modify the holder , and how do you slip it into the hole in the floor we won't get into the acid spill
Posted on: 2015/5/29 19:43
|
|||
|