Re: '55 Power Brake rod thru floor board grommet
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
For the felt I'd just buy a piece of felt and cut my own, sheet felt commonly available, probably MSC and McMaster-Carr have it in varying thicknesses.
Posted on: 2016/4/1 14:49
|
|||
|
Re: '55 Power Brake rod thru floor board grommet
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
On the photo, make sure the size isn't over the 2 meg limit and there are no odd punctuation characters in the title. File being too large is the usual reason photos won't post.
Am surprised Kanter doesn't have the bellows and I didn't see them at Max's or Steele either -- all of whom used to carry them.. Can it be the great bellows conspiracy or did they just happen to all run out of stock at the same time?? If none of the Packard people can supply the real item there are some aftermarket places that can come close. Here is one of them I have purchased items from.http://www.rubberstore.com/catalog/connectors-c-21_22_25.html My car is no longer stock to have one to look at but if no one else has something ready at hand to measure I will get some basic dimensions off an old one to give you an idea of how the original was sized. On the felt, O_D has the best suggestion. Just buy a foot square sheet of 1/4" or whatever but if you want a ready made item McMaster has felt cushioning washers. Don't remember the size needed but you can look thru their selection. Downside if you co that way is you have to buy 25 of them.
Posted on: 2016/4/1 15:03
|
|||
Howard
|
||||
|
Re: '55 Power Brake rod thru floor board grommet
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks for the info, i will get some of that felt and make my own.
HH56, i was referring to the round rubber grommet that attaches to the toe plate, not the push rod boot (bellows) that goes on the Bendix Treadle unit. Photos attached this time. thank you
Posted on: 2016/4/1 15:24
|
|||
Bob
1955 Packard Patrician Sapphire Blue |
||||
|
Re: '55 Power Brake rod thru floor board grommet
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Maybe I'm forgetting, I remember the large round rubber grommet attaching to the carpet, not the toe plate. Do I have it wrong?
Posted on: 2016/4/1 15:33
|
|||
|
Re: '55 Power Brake rod thru floor board grommet
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Could be. It was all loose when i removed the brake unit, so maybe its supposed to go around the carpet.
Posted on: 2016/4/1 15:38
|
|||
Bob
1955 Packard Patrician Sapphire Blue |
||||
|
Re: '55 Power Brake rod thru floor board grommet
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Yes, it is a grommet for the carpet.
Posted on: 2016/4/1 15:42
|
|||
|
Re: '55 Power Brake rod thru floor board grommet
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
My mistake. Steelehttp://www.steelerubber.com has the carpet grommet if you need a new one.
Posted on: 2016/4/1 15:51
|
|||
Howard
|
||||
|