|
1950 Series 23 tie rod ends
|
||||
|---|---|---|---|---|
|
Not too shy to talk
 
|
Looking for help locating new inner & outer tie rod ends for my '50. Any advice/suggestions appreciated....
Posted on: 2016/12/23 18:00
|
|||
|
||||
|
Re: 1950 Series 23 tie rod ends
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
The inner tie rods can be adjusted to eliminate play. You will note slotted plugs in the end of the cross link between them. Remove the cotter pin and turn the plugs in till they stop. Back off about one turn and repin the plugs. Done.
Posted on: 2016/12/23 20:53
|
|||
|
||||
|
Re: 1950 Series 23 tie rod ends
|
||||
|---|---|---|---|---|
|
Not too shy to talk
|
Thanks for the replies and info guys, my concern is that the right (passenger side) inner rod is badly bent, it looks like someone used the steering linkage as a anchor point for a tie-down on a trailer! I'll try to get some pictures to better explain it. I'm hoping to find a replacement.
Posted on: 2016/12/24 13:33
|
|||
|
||||
