Re: 1951 Packard 200 sedan bumper jack foot
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
John,
I do not have a picture, but there should be one in the owners manual, and the wheel section of the service manual.
Posted on: 2018/8/11 10:18
|
|||
|
Re: 1951 Packard 200 sedan bumper jack foot
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Checked out the owners manual for 1951, but the picture doesn't show very much in detail, looks more or less like a black square.
Posted on: 2018/8/11 15:26
|
|||
|
Re: 1951 Packard 200 sedan bumper jack foot
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Attached are photos of the jack base top and underside for my 1954 Convertible. This was not with the car when I bought it, David Moe of Seattle Packard supplied it. The '54 jack & tool kit carries a different part number from the '51 through '53s, but it looks like the difference is the prior years included a spark plug wrench which is not listed for the '54s.
The triangular part of the base juts up 2 1/2 inches from the ground.
Posted on: 2018/8/12 18:19
|
|||
Don Shields
1933 Eight Model 1002 Seven Passenger Sedan 1954 Convertible |
||||
|
Re: 1951 Packard 200 sedan bumper jack foot
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks Don for the pictures and measurements of the jack base.
John
Posted on: 2018/8/12 20:25
|
|||
|
Re: 1951 Packard 200 sedan bumper jack foot
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
You're welcome, glad to have been of help.
Posted on: 2018/8/12 22:31
|
|||
Don Shields
1933 Eight Model 1002 Seven Passenger Sedan 1954 Convertible |
||||
|