Re: 1937 wheel cylinders
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks for taking the time to reply, Don. I will email you, Chris.
Posted on: 2020/2/5 16:51
|
|||
'If you think you can, or you think you can't - you're right!' Henry Ford.
1939 Packard Six, Model 1700 |
||||
|
Re: 1937 wheel cylinders
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
The Packard Parts List under the Main Menu on this site is a good reference.
Group 1.023 for wheel cylinders shows part numbers 302950 and 302951 for left and right rear wheel cylinder assemblies for most 6 cylinder and 120 models from 1935 to 1941 plus some applications for 1941-47 Clippers and 1948-50 models.
Posted on: 2020/2/5 22:43
|
|||
|
Re: 1937 wheel cylinders
|
||||
---|---|---|---|---|
Just can't stay away
![]() ![]() ![]() |
ok all thanks you posting and watching ... here after a LOT of time with the steam cleaner and oven cleaner .. i got about 1/2 in OR 80= years of junk off the backing plates and now can see the ( not a bleeder ) but look like a plug ?
Posted on: 2020/2/17 19:17
|
|||
Daily Driving a 1937 115c TS
|
||||
|
Re: 1937 wheel cylinders
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I'm not much on the older cars, but didn't they have a screw in bolt (plug) to keep the dirt out of the bleeder? It's hard to tell with the picture but look closer and see if it looks like a bleeder and bolt (plug) are both there.
Wes Sorry I looked at your other picture and I can see where it is missing the bolt (plug). Wes
Posted on: 2020/2/17 19:25
|
|||
|
Re: 1937 wheel cylinders
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
That is a bleeder and it is indeed missing its cover screw. I had forgotten about that type but it explains an odd hose I found in my toolbox from my prewar Packard days (I'm not prewar but the Packards were) which is apparently for this type of bleeder.
Posted on: 2020/2/17 19:59
|
|||
|
Re: 1937 wheel cylinders
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Here's what one of my brake cylinder looked like and missing it's slotted screw to keep dirt out. Mine had slotted screws in them.
Wes
Posted on: 2020/2/18 14:06
|
|||
|
Re: 1937 wheel cylinders
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Good Evening...Do you all ever wonder if our Packards would make a few impolite comments regarding their treatment over the years. I know 'Miss Prudence' would in a couple of instances! Ernie in Arizona
Posted on: 2020/2/18 19:25
|
|||
Caretaker of the 1949-288 Deluxe Touring Sedan
'Miss Prudence' and the 1931 Model A Ford Tudor 'Miss Princess' ![]() |
||||
|
Re: 1937 wheel cylinders
|
||||
---|---|---|---|---|
Just can't stay away
![]() ![]() ![]() |
Don ... can you post a pic of the hose for me ????
Posted on: 2020/2/18 20:44
|
|||
Daily Driving a 1937 115c TS
|
||||
|
Re: 1937 wheel cylinders
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Once I'm at my shop (it's 550 miles away) and if I can find it again, I would be happy to IF I still have it. The hose was old and brittle so I may have thrown it out. It was nothing special, though, just a hose with a threaded fitting and seal on the end that matched those on the bleeder.
Posted on: 2020/2/19 12:34
|
|||
|