Packard Forum Index » Project Blogs

Looks like it might work. The original has the feed wire on one stud and the other stud is attached to a buss bar on the light switch which provides the mounting. The extra mounting screw tabs on that would not be used and if they don't interfere, all is well. If they do, then not a big job to mount the breaker close by and just run a short decent ga wire to the buss bar.

I have the same car that you do. You have done more on your Packard than I have since I bought mine - Congratulations !

What ever became of Chuck's project blog? Lot of intense work then just stopped? Many times projects are overcome by economic reality.