Re: 1953 leaf spring removal
|
||||
---|---|---|---|---|
Webmaster
![]() ![]() ![]() |
From the 51-54 Service Manual:
Posted on: 2021/10/13 7:00
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: 1953 leaf spring removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks. What i am referring to is the 2 sentences after the picture. There isn't much detail. I guess just hammer the bolts out?
Posted on: 2021/10/13 7:05
|
|||
John Rhodes
1953 Packard Patrician |
||||
|
Re: 1953 leaf spring removal
|
||||
---|---|---|---|---|
Webmaster
![]() ![]() ![]() |
I believe so. I would imagine the bushing is probably wedged around it now. Even installing, I believe they are a tight fit. But I'll let others comment that have been there, done that.
I've see on other cars where the bushing is petrified, and won't budge, folks have resorted to touching out the old bushing. But I'd try other methods first. I'm sure Ross can recommend a preferred extraction method.
Posted on: 2021/10/13 7:51
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: 1953 leaf spring removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks
Posted on: 2021/10/13 8:23
|
|||
John Rhodes
1953 Packard Patrician |
||||
|
Re: 1953 leaf spring removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Just wondering if anyone had suggestions here.
Thanks
Posted on: 2021/10/16 13:44
|
|||
John Rhodes
1953 Packard Patrician |
||||
|
Re: 1953 leaf spring removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I don’t recall ever having any so stuck that they couldn’t be readily removed so it’s not exactly clear to me where you are having the problem. If the front bolts, going from memory they push through and if the rear shackles, they come out as a pair/unit with one side of the shackle. In either case, they may be somewhat tight so you’ll have to relieve any weight that you can (even the weight of the spring itself) and you may have to lightly drive them out.
Be careful to not damage the threads, though. I typically install the nut at least half way, then do any tapping on it and once they start to move to the point that the nut must be removed entirely, you should be able to pull them out or use a soft brass drift to tap them the rest of the way.
Posted on: 2021/10/16 17:43
|
|||
|
Re: 1953 leaf spring removal
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks.
Posted on: 2021/10/16 18:38
|
|||
John Rhodes
1953 Packard Patrician |
||||
|