Re: 1937 water pump
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Groucho
I don't have a prewar car so I cannot be certain of this. The vanes on that pump look very feeble to me. I know Kanter spent the money to have repros made for this epumps when the cores dried up. I have put two of their 356 pumps and for a 288 on my cars with good results. You might also check with Gould rebuilders and Merritt, they might have some some on the shelf. It is a little effort to put one on, and I wouldn't want to do it twice because it wasn't adequate . I have had to replace a good pump because someone else tightened the belt too much. The price for rebuilding and the price for a good repro seem to be close. Best John Harley
Posted on: 2021/10/20 21:53
|
|||
|
Re: 1937 water pump
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Quote:
Thanks John. Yes I've had one rebuilt twice already (under warranty of course so I paid for the initial price only). However shipping it back twice does surely add up! I was hoping that this latest one I got would've worked out for me and I liked that it had the internal bearing vs the bushings.
Posted on: 2021/10/20 23:43
|
|||
|
Re: 1937 water pump
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Groucho
So how do the vanes on that pump look like compared to your other pump? John
Posted on: 2021/10/21 8:06
|
|||
|
Re: 1937 water pump
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Quote:
The vanes on this pump which are on the underside, are a little "beefier" than my other pump.
Posted on: 2021/10/21 19:02
|
|||
|