Re: Overdrive in a 1941 Packard
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
It would most likely be stock as Packard first offered the R6 version OD in 39. The 41 unit would be the R9 version which was used starting in 40 and lasted thru mid 48. The R9 relay on the firewall is a black squarish box with 6 terminals and about the same size as a voltage regulator. Under the car, the solenoid is on the passenger side and has 4 terminals. Lockout lever is also on the passenger side.
R9s had an issue which for some drivers occurred more than once so Packard offered a retrofit kit when R11s came out in mid to late 48 and owners could swap out the earlier units if they wanted to buy the kit. There is a slim chance the OD could be the later R11 version. That unit has a smaller 4 terminal rectangular case relay with a fuse on the side. Solenoid is 2 terminal and it and the lockout lever moved over to the drivers side.
Posted on: 2021/10/27 12:21
|
|||
Howard
|
||||
|
Re: Overdrive in a 1941 Packard
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thank you Howard...I'll let everyone know when I view the car in a couple of weeks or so...Ernie
Posted on: 2021/10/27 16:56
|
|||
Caretaker of the 1949-288 Deluxe Touring Sedan
'Miss Prudence' and the 1931 Model A Ford Tudor 'Miss Princess' ![]() |
||||
|
Re: Overdrive in a 1941 Packard
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
I have an R9 overdrive in my 39 120 and it has always performed flawlessly. It greatly improves the drive-ability of the car as I have no trouble doing 75 mph on the freeway. Other drivers are surprised to see a 39 Packard on the road and even more surprised when I pass them!
Posted on: 2021/10/27 19:58
|
|||
|